Haftputz

Haftputz: plasters

In older buildings or extensive conversions, there are often very irregular plaster surfaces and substrates made of different materials. In many cases you can achieve the best results here with adhesive plaster. For indoor use gypsum-lime-based plasters are suitablethat develop a very high adhesion to the substrate.

In general, the plasters are applied to the cleaned, cleaned of light color residues and vorgenässten substrate with the trowel in a thickness of a few millimeters. Then the plaster is smoothed with a sponge board. As a rule, the surface is rougher than with fine plaster, because adhesive plasters have a slightly coarser grain. If a fine surface is desired, you can smooth the hardened surface with sandpaper.

Similar sites

  • Lotus effect
  • Lay tiles correctly
  • Mold-stop plaster - plaster wall mold-free - A wall plaster with titanium dioxide
  • Facade coating with lotus effect
  • Apply sealing slurries - seal walls and floors
  • Laying large tiles - this is how it works
  • Balance ground and prepare
  • Prepare underground for terrace
  • Plaster interior plaster: plaster work on interior walls
  • Process lime cement plaster
  • Cockroaches: Remove the plaster with the scraper attachment
  • Processing of cotton plaster and wall tattoos
  • Paving garage entrances, garden paths and terraces - laying underground paving stones
  • Plaster aerated concrete
  • Wallpaper non-woven wallpaper yourself

Video Board: Wand mit Münchner Rauputz verputzen, Reparatur mit Haftputz