An old sofa itself in the same form or with change relate


It is in most cases less difficult to get a sofa or couch yourself than it seems. In addition to the selection of the appropriate fabric, above all the durable and stable tension is important. Therefore, when referring to DIY should always be done in pairs. Some reference forms such as nailed upholstery increase the craftsmanship claim.

Material combinations and reference forms

An old sofa consists of three possible upholstery materials, which in turn can be obtained with these three materials. Each combination has its own characteristics:

Real leather

If the leather upholstery is not stretched taut, but has soft elasticity, either the reference shape is changed to full-tone or the old cover is replaced. Again, real leather is the biggest challenge and requires advanced craftsmanship.

leatherette

The artificial leather surface is made of plastic, which is pulled tight in almost all cases. Here, a new cover not only clamped, but also applied by surface bonding. Damage such as incipient dissolution can be repaired by using appropriate adhesives at the same time.

fabric

Fabric covers are usually the most modest materials, which offer the greatest leeway in the new cover. Obtaining a leather sofa with fabric is often the best way to renew. Sew-on and washable variants, which are pulled over like chair covers, make work easier.

How to get a sofa yourself

  • New fabric
  • Yarn and / or
  • material-specific adhesive and / or
  • Jewelry nails and buttons
  • Possibly padding material such as foam
  • shears
  • Cutter or wallpaper knife
  • tape measure
  • Possibly material-specific sewing needle
  • helper

1. Determine the type of fastening

You can repeat the exact form of reference that the sofa is making or forming. Buttoned and rounded covers can be upholstered with foam to create a smooth, even surface.

2. Disassemble the attachment

When you pad up, you only have to disassemble the edge fastenings.

3. Remove old cover

In most cases, it is recommended that the old cover be raised as a support for the new cover.

4. Cut the new cover

When cropping always think of marginal addition. Overhanging edge pieces only remove after the finished stringing.

5. Bonding with new purchase

Especially on synthetic leather a special adhesive can be applied flat to form a stable covering ground. Gluing is only possible with a smooth cover.

Tips & Tricks

To avoid later slipping on a smooth surface, you can make individual adhesive fixation.


Video Board: How to Promote Your Business on Social Media in 2019 | London Keynote 2018