As a substitute for an anvil can serve stable cuboids

In simple terms, an anvil is just a hard, dimensionally stable and durable work surface. Depending on the intended work, a non-anvil alternative may serve the purpose. For jewelery, model and jewelry work often enough metal blocks or provided with metal surfaces wood blocks.

Stable blocks, blocks or cuboids

For many blacksmith work with smaller workpieces, a "real" anvil does not necessarily have to be available. Hard burl wood and metal-clad blocks, blocks or blocks meet the requirements, for example, to bend sheets or to form precious metals. If the workpieces come into direct contact with the surface, metallic surfaces are recommended.

As a substitute for an anvil only break-resistant materials are considered. Therefore, stone and concrete components are excluded, unless they are reinforced by metallic cladding. Only hard metals such as steels or pure iron are suitable, the hammer blows and sharp-edged workpieces can withstand damage.

Required properties

In the alternative to the common anvil shapes, the replacement usually has at least a right-angled edge on which workpieces can be bent and folded. Here are often provided with a steel or iron plate on the top provided square or rectangular carrier. For practically usable forming edges, the metal must be flush with the vertical side of the carrier at least on one side.

Every time an anvil is replaced, it must be checked whether it can withstand the vibrations caused by hammer blows and tear-proof. The surfaces must also have a suitable hardness so that no dents, notches and holes are created during use.

At low dead weight of the blocks, blocks or blocks must be paid more attention to the substructure. Wood bodies must be securely fixed in such a way that they remain in place even with punctual and high force impacts slip-free and judder-free. Fixations must act in all possible directions of movement of the work document.

Tips & Tricks

For specific work applications, you will find excellent basic tools in the tool trade as an anvil replacement. For example, they are offered for riveting in special forms. Even with sometimes very small counter bearings for riveting and punching pliers and punching is spoken of spare anvils.

Video Board: