Install bell or door intercom


Connect a doorbell and start up

Install bell or door intercom: door

To install a new bell is for one savvy home improvement quite easy. However, today's systems are fundamentally different.

In the past, mainly a bell transformer with a doorbell and the typical door chime was used, today there are intercoms with or without image transmission, radio ringing and even connections to the domestic WLAN or Dect telephone.

Which system is ultimately used, decides the user himself. Depending on the cost, the possibilities are limitless.

Due to the many different systems, it is hardly possible to provide a general guide or a wiring diagram for connecting a doorbell.

There are old systems with bell transformer, newer with its own power supply and depending on the functionality with 2, 3 or 4 lines.

The old system of the bell system with bell transformer and gong

According to the state of the art, old bell systems were quite simple and spartan. A bell transformer provided power to mostly 8 volts and the circuit to the door chime was interrupted by a bell push.

If someone presses the button, the circuit closes and the bell is triggered. A special feature was already a bell transformer for DIN rail mounting, which was housed in the meter cabinet or fuse box and thus made the power supply (the bell transformer) in addition to the bell superfluous.

Such DIN rail Bell transformers On the one hand they offer the advantage of easier installation and on the other hand they often have different voltages for different devices.

The cable laying could be kept very simple due to the low voltage. The so-called bell wire, which consists of two separate and mostly twisted lines, was fastened to the wall with nails and established the connection between the bell button and the doorbell.

If the doorbell or the bell on the front door should be lit, you needed at least one more line.

Instructions: install a simple bell

The ducts for installing the doorbell were laid in the house installation or can be retrofitted and can be easily used. Should no lines for the bell have been installed in the house - that can quite possibly happen with the old building -, should over the use of a wireless bell to be reflected.

Alternatively, it can be thought about a subsequent installation, which, however, requires more effort and can rarely be implemented visually appealing.

Install bell or door intercom: bell

Installation instructions for installing the doorbell

First, a suitable space in the vicinity of the laid lines is needed. This should be for a good sound production on one Height of about two meters lie and yourself not immediately near radiators are located. For the sequence of assembly proceed as follows:

  1. The Sound housing is opened or screwed on and attached to the wall with dowels. The housing should be aligned with a spirit level. Then you tighten the screws.
  2. In the next step the bell is wired. In this case, the bolt of a door chime, which strikes the swinging suspended sound boards, must not be oiled or dirty by drilling dust.
  3. Is not a bell transformer available, this must be connected to the bell line at a suitable location. Since bell transformers work with AC voltage, the polarity does not need to be considered. But you should consider the required power connection.
  4. The assembly of the Klingeltasterts does not require any special knowledge, he should but if possible protected from rain be attached.
  5. Subsequently, the connection of the bell wire can be made. For this purpose, the Ringing wire stripped to about 1 cm and bent to an eyelet. The eyelet is placed around the connection screw with the open side pointing to the right (direction of rotation of the screw).
  6. In the last step you set the housing cover on.

In a favorable case, the bell transformer is in the fuse box of the house. If this is defective, we recommend replacement by an electrician. A home improvement should not perform such work due to the risk of injury from electricity.

Wireless bell as a mobile alternative

Wireless bell systems or radio bells are a good alternative to conventional bells and are characterized by a easier assembly out.

Instead of a connection to the bell system installed in the house, with radio-operated doorbells only the transmitter and receiver are mounted. The transmitter in the form of the doorbell button is placed near the front door. By contrast, the receiver house is placed, for example, in the entrance area of ​​the apartment.

The advantage: Because the range depending on the model between 50 and 200 meters is the receiver of the radio bell can be mounted anywhere in the house. However, walls or components can reduce them. Depending on the model, different ringtones and volumes are available.

Particularly useful are receivers, which, like a night light, are only plugged into a power outlet. At the transmitter, however, the batteries must be regularly checked and replaced if necessary.

adversely In a radio bell system is in many cases the thick bell push button that contains the battery. This is strong outside and can be easily damaged.

Wireless doorbell with Wi-Fi / Wi-Fi

Today, it's common for everything to be linked and networked to access it from anywhere in the house. Whether it always makes sense is questionable, but it also offers a special advantage. If many technical functions are used in one device, energy can be saved and thanks to modern wireless technology, cable clutter is minimized.

Install bell or door intercom: door

Doorbell with camera and monitors

An example is certainly the doorbell or video door intercom from AVM, which uses the domestic network for integration. Needed is only the outdoor unit, as in many cases anyway a Fritz! Box and the right Dect phone is used.

With the appropriate accessories can be switch sockets simultaneously, Operate light switch or Check conditions such as temperature or water levels. With a suitable app, all systems, including the doorbell, can even be monitored on the smartphone.

Practically, the use of the Wi-Fi network is in any case, because everyone arranges this so that he can use it in the entire living area and often in the garden. The ringing signal is thus not limited to a fixed doorbell, but can be "taken along" with the DECT phone.

If a video intercom is used, can be thrown in front of the door by means of a mobile phone even in the bathtub, which is not possible with a permanently installed systems. Despite a lot of technology, you always have to walk to the bell or video system here.

Doorbell with MP3 playback

The use of MP3s as a signal output had their big boom with the first mature cell phone, which were able to play songs or voice recordings with mostly low quality. Then every possible technical device was equipped with such a possibility. It was new, interesting and was used.

Today, conscious use has been severely restricted. Many devices offer so much technology that the ability to play MP3 files is no longer respected. It just belongs and is required. Simple devices with the only additional option to be able to play songs have lost their importance.

Crucial for this is certainly the price. Simple wireless bells with MP3 function beat fast with 20 € to bookwhile for the same money are much better equipped bell systems with 50 different tunes to have. Paying attention to the programmable MP3 playback would rather be a special preference.

It must also be distinguished the equipment of the MP3-bell. Many providers advertise with an MP3 playback, but only refer to the playback of already stored MP3 files whose selection does not automatically make their own taste.

If the selection falls on a doorbell with MP3, then it should also be able to use your own files. Only then can the ringtone be personalized.

Doorbells made of plastic or stainless steel?

In addition to the personal taste of course, the price decides on the future bell system. It should be noted that stainless steel bell labels indestructible but unfortunately they also have their price. If you are looking for a permanent solution and above all for good protection against vandalism, you should therefore resort to stainless steel.

Significantly cheaper on the other hand are plastic housings. These are easy to manipulate and bleach out in the sun. But plastic also offers its advantages. This makes it possible to produce much more complex shapes, and the color can also be designed individually.

Similar sites

  • The Kärcher Mobile Outdoor Cleaner OC 3 (low-pressure cleaner) in
  • Which workbench is the right one and how can I build it myself?
  • Craft baby bed mobile for babies
  • Mobile construction manual: Mobiles from Easter to Christmas
  • Simply renovate the garage floor yourself
  • Install sockets in garden and car
  • Wood protection products - protecting old and new woods
  • Connect ceiling lamp and mount low voltage halogen rail system
  • Decoration ideas for Christmas
  • Tinker halloween mobile
  • Mobile tinkering: instructions
  • Clean stainless steel
  • Stainless steel gas grill
  • Door Phone
  • Mobile air conditioners

Install bell or door intercom

FAQ - 💬

❓ Can I use ring doorbell as an intercom?

👉 Intercom Kit will allow you to replace your existing intercom with a Ring Video Doorbell so you can hear, see and speak to visitors from everywhere. Simply unscrew your intercom, attach the Intercom Doorbell Mount into the existing holes and easily mount your Ring Video Doorbell on top.

❓ Which intercom is the best?

👉 This article investigates how to choose the best home intercom system for any situation.

  • BEST COMPACT: Echo Dot (3rd Gen) – Smart speaker with Alexa.
  • BEST MULTIPURPOSE: Chunhee Wireless Intercom System for Elderly/Kids.
  • BEST VIDEO DOORBELL: Ring Video Doorbell Pro 2.
  • BEST MONITOR: Infant Optics Video Baby Monitor DXR-8.

❓ Where do I install intercom?

👉 Usually, one is mounted outside the front door and the other on the inside (or accessed by an app on your mobile device). They don't have a base station or a substation. You'll need to pick out the parts that best fit your needs before beginning intercom system installation.

❓ How do I connect my intercom at home?

👉 Step 1: Pair a Bluetooth accessory

  1. Swipe down from the top of the screen.
  2. Touch and hold Bluetooth .
  3. Tap Pair new device. If you don't find Pair new device, check under "Available devices" or tap More. Refresh.
  4. Tap the name of the Bluetooth device you want to pair with your device.
  5. Follow any on-screen instructions.

❓ Can ring doorbell open door?

👉 When you receive a call from your Ring doorbell, you will have the option to launch the smart lock app from the Ring app and remotely unlock the door for your guest. To use: Ensure your Android or iOS device has both the Ring App and the Lockstate, Kisi, or Lockitron app installed.

❓ How do you install an intercom Ring?

👉 0:121:19How to install Ring Intercom | Ring

❓ Do people still use intercoms?

👉 You may have your phone with you most of the time, but even with the instant access to texts and calls, intercom systems still provide a lot of uses for modern homes. Professionals can install intercom systems in many different rooms of the home.

❓ How much does it cost to install video intercom?

👉 Installing an intercom system costs an average of $1,200 to $8,500, including the intercom materials and labor. Advanced systems with the latest audio and video technology may cost upward of $10,000, especially if you need to install intercom substations in multiple locations around your home.

❓ How is intercom installed?

👉 Rails gem

  1. Step 1: Add Intercom to your Gemfile. Ruby. gem "intercom-rails"
  2. Step 2: Make sure Intercom is installed by running this command: Ruby. bundle install.
  3. Step 3: Generate a config file with this command: Ruby. ...
  4. Step 4: Add this line to the config file to display the Messenger on every page of your app: Ruby.

❓ How long does it take to install intercom?

👉 It only takes a few minutes to install the Messenger on your website. Once installed, you'll be able to welcome, onboard, and support customers as they become loyal users of your app. The Messenger is easily customized to suit your brand. You choose who can see the Messenger, and how they can start conversations.

❓ Is there a monthly charge with the Ring doorbell?

👉 Ring Protect Basic costs $3.99/month or $39.99/year. Ring Protect Plus includes video recording for all doorbells and security cameras in your home. You also get an extended warranty plus 10% off select Ring products on Ring.com and Amazon.com. Terms and conditions apply.

❓ What do you need to install a doorbell intercom system?

👉 Aside from the doorbell camera, you will also find one power adapter, WiFi antenna, RJ45 cable connector, mounting screws, indoor chime connecting wire as well as the user manual you can follow for easier installation. Next on our best doorbell intercom system list is a model by the brand called Tmezon.

❓ What is a Ring doorbell intercom system?

👉 A ring doorbell intercom system is an outdoor doorbell camera and an indoor screen with an intercom. It is used to protect your home from the intruders, but also to know who is visiting your home at all times.

❓ What devices are compatible with the GBF intercom doorbell?

👉 This intercom doorbell is compatible with iOS and Android devices. It requires a 2.4G Hz Wifi system and you will have to download their free app on your phone or tablet. To talk to your visitors this GBF wireless video intercom doorbell system will use the microphone and speaker features of your phone!

❓ How far can a walkie talkie intercom doorbell go?

👉 Wireless Intercom Doorbells Two-way Portable Walkie-Talkie Operating at Over 600 feet for Home and Offfice Include 1 Receiver Talk Home Doorbell Intercom Kit. (Silver) . Only 5 left in stock - order soon.


Video Board: How to Install a Front Entry Intercom - This Old House