Blouse show DIY and home improvement

Hello readers of the Blouseschau,

Blouse show DIY and home improvement: home

Ricc - I blog for you

After a relaxing weekend we start the new week. Yeah, who did not notice it on Facebook, I once again built a little something.

By the way, my workshop is also a small party room and in it there is a kitchenette in which the discarded kitchenware collects. For barbecues or small celebrations it is convenient when everything is on site. But what bothered me for a long time, are the large handle jars, in which the cutlery has found its place. Although quite handy, but takes a lot of space away. Since there are no drawers in the kitchen, a stable cutlery box had to be made, which can be easily removed and placed on the table. I have finally built this cutlery box.

Blouse show DIY and home improvement: blouse

canteen

On Facebook, the many screws were already complained, but they have a specific reason. If, as in our case, the cutlery tray is taken out of the cabinet more often, it must, of course, have a certain stability. If it is then on the table or cabinet, stay with the grilling fat fingers or other impurities. Now I can unfortunately pack the cutlery bad in the Spüli and would like to be able to thoroughly clean it every now and then. This is only possible if I disassemble it, rub something over and put it back together. Hence the screws. But I also like a clean screw image. That's why I always put a lot of effort into things like that, so that all screw distances are the same. Since every screw hole is really marked and predrilled on the bench drill.

Before I start with the actual Blouse Show, just a few pictures to build:

Blouse show DIY and home improvement: show

cut

Blouse show DIY and home improvement: show

Grooves for the floor

Blouse show DIY and home improvement: home

Cutting the floors

Blouse show DIY and home improvement: home

Cutlery box from below

Blouse show DIY and home improvement

Calendar for printing

That's nice of Sodapop design, She made the effort and designed a calendar for 2016. Well, I could certainly do it myself, but the free offer for download, I like to take and the printer is running next to me. Do not take the laser printer, something is too weak. I have also set the color printer to a good and strong pressure. Add a clipboard and we can enter all the shoulder mine. It gets really bad at the gymnasium.

//sodapop-design.de/2015/10/kalender-printable/

Cabinet purchase - when DIY artists home

I think it's great that not so well-versed DIY enthusiasts dare to small projects and even resort to unconventional means. So show us Gingered Things her small cabinet construction, which she really only had to glue. It's not that hard, you just have to dare. Even if there are no screw clamps in the house and instead cooking pots are used. I think it's good and hopefully will give me a lot of courage.

//gingeredthings.blogspot.de/2015/10/schrankaufsatz-fur-mehr-platz-ordnung.html

Decorate with diamonds

And then it goes to the next free print template. Titatoni likes a noble decoration and tinkers diamonds, which can be designed to suit any theme. I will certainly pick this up and then my children will be able to paint the Christmas decorations this year. My wife cuts out, the children paint and I hang it on the tree. Thus, the work distribution is once again perfectly resolved. ?

//titatoni.blogspot.de/2015/11/diy-diamonds-und-Gewinnspiel.html

Magnetic poster bar

Actually, I do not like to share sponsored posts, but I like the idea of Dekotopia just too awesome. We have just removed posters in the nursery and the weird poster stickers are really good. Wonderfully they break away from the posters and the wall. They also take the color with them. Such poster bars would be a good alternative. They do not even have to be built with magnets. That certainly holds well stapled. In any case, the wall stays healthy.

//dekotopia.net/in-szene-gesetzt-magnetische-posterleiste/

Reindeer and moose of wood and branches

Now it really starts with the Christmas shopping. ? But I have to admit that I like them enormously. Finally, the reindeer connect from WeDo Handicrafts and DIY. This must actually be drilled and glued. Since I could actually be inspired for a children's craft afternoon. If, then I will report about it.

//wedo-blog.de/rentiere-und-elche-aus-holz/#h=992-1447078457927

Sanding with the scroll saw

Especially Schwibbogenbastler know how, it is tedious to grind fine contours. Practically it is there, of course, if it works by machine. So why not use the same machine with which the contours were sawn beforehand? Fine from Wuppertal not only describes this in a post, he also shows a video soon.

//feines-aus-wuppertal.blogspot.de/2015/11/einfaches-schleifen-mit-der-hegner.html

From the angle to the lamp

Why complicated, if easy? Thought obviously monochrome and created an interesting lamp. A wooden angle, a cable, a lamp holder and a few more holes are enough to make a great wall lamp. But that's not all, in another post, a lamp made of copper pipe is shown, which can be just as fast and easy to build. However, a small hint from me: Copper conducts electricity and thus such copper tube lamps would actually be grounded.

//monochrome-diy.de/wordpress/vom-winkel-zur-lampe/

As promised, I gave myself more to the DIY and craft blogs this week. With the amount of blog posts it will cover a lot of all areas.

With a little funny but also fascinating film I would like to say goodbye to the working week. Leaf blowers are not an invention of humans. You can find more information about the video and the background at: //natur.de/de/20/Druckluft-als-Elefantenwerkzeug,1,,1787.html

Your Ricc

    Video Board: DIY - Lace Panel Shirt - Home & Family