Cable duct comparison 2018

Purchase advice for cable channel comparison or test 2018

  • The cable duct ensures the clean routing of electrical cables. They are an important part of every electrical installation.
  • The cable duct can be mounted anywhere - such as on the floor, along the wall or on the ceiling.
  • Self-adhesive models are available for easier attachment. Tests of cable channels, for example from Stiftung Warentest, do not yet exist.

Cable duct comparison 2018: duct

Laying power cables is one of the most common tasks for any DIY enthusiast. Ceiling power cables must be routed as well as cables on the floor or along the wall for telephones, speakers and many other electronic devices.

So that the cables integrate as inconspicuously as possible in the room, is the cable channel an elegant way for the clean management of the cable ready. Various cable channel tests show that beginner-friendly products are available on the market as well as the high-quality cable trunking for professional use.

If you want to work on your electrical installation, a cable attachment is necessary in any case.What you should pay attention to when buying a cable duct is revealed in our cable duct comparison 2018.

1. The cable duct - keep electrical cables clean

Cable duct finds space everywhere
Since you can lay your cable duct virtually anywhere, it is easy to hide the cables in the room. Often, for example, the attachment along the baseboards offers. The cable channel is then visually barely perceived. In the corner of the room, you can also attach the cable duct meaningfully. You should also try to lay the channels where the view is blocked. This can be behind a TV or behind a speaker.

Cable duct comparison 2018: comparison

A cable duct hides unsightly cable strands in an instant.

With a suitable wall channel, order gets into the wiring. Whether it is a pedestal channel, floor channel or ceiling channel: The decisive factor is that the cables do not simply hang around freely, but are guided precisely.

A cable duct for office supplies and electrical installation can take on this important task. One of the strengths of the cable channel is its versatility.

You can route electrical cables through the channel for power, image and data cables, and audio cables or fiber optic cables. Most channels offer so much space that you can easily lay multiple cables side by side.

The mounting is done either by screws, by clips or by a self-adhesive surface. The assembly work makes only small demands on the craftsmanship and can also be performed by a layman.

2. Cable duct tests: find the right variant for every application

The cable channels available on the market all fulfill the same basic function, but differ in the details. You should inform yourself before purchasing what distinguishes the offer of the manufacturer.

2.1. The advantages and disadvantages of cable ducts at a glance

Below you will learn more about the advantages and disadvantages of the various cable channels:

  • clean laying of cables and lines
  • ensures a high degree of order, cable clutter can be effectively avoided with little effort
  • the cable channels can accommodate multiple cables
  • to assemble some models a drill is required
  • Number of cables that can be laid in one channel is limited
  • not every model is available in every color

3. Purchase advice for your cable duct: bring order into the wiring

Cable duct comparison 2018: 2018

Cables read irrespective of the plug used.

A cable channel offers you many advantages. It brings order to the wiring, is barely visible on the wall, the ceiling or the skirting board and does not cost much.

The assembly can often be carried out completely without tools - For example, if the cable channel is self-adhesive. If you want to wire computers or lay the HDMI cable for your TV, a cable channel is an essential tool.

3.1. The shape of the cable channels

Each cable channel has a specific shape. Common are, for example, cable channels in rectangular shape and semicircular channels.

Rectangular channels can be optimally guided along the corners of the room and offer plenty of space. A semicircular cable duct can be more harmonious on the ceiling and is usually a bit flatter than a rectangular duct. It is important that the shape fits well in the room.

3.2. The material

Most cable ducts available on the market are made of plastic. The advantages are obvious: The material is cheap, easy to clean and has a low weight, High-quality cable channels are made of aluminum.

Although the weight is significantly higher, at the same time your cables are in such a cable tray optimally protected against external mechanical influences, The higher investment can therefore be worthwhile if it is important to avoid a cable break in any case.

3.3. Number of routable cables

The manufacturers indicate exactly how many cables you can lay in the cable duct at the same time for your products. A cable duct should at least be able to accommodate two wires simultaneously. Better products can accommodate three to four cables.

Top products accommodate even five cables at the same time. The larger the number of cables, the fewer cable channels you need to lay in the room. This is how you create order, find an optimal organization for your cables and cables, and thus avoid the unpopular cable salad.

3.4. The type of attachment

Cable duct comparison 2018: 2018

This cable channel is simply closed with a Velcro.

One of the most important criteria when purchasing cable ducts is the cable attachment. Essentially, there are three methods to choose from: you can glue the cable duct, fasten it with clips or drill it.

Fixing clips are particularly useful, here you mount your new cable duct without tools. This also applies to self-adhesive cable ductsHowever, they are often not reusable once they have been attached.

Drilling represents the largest amount of work, but it is also the safest method of attachment.

3.5. The weight

The weight of the cable duct depends essentially on its dimensions and the material used. For plastic products, the weight usually ranges between 120 and 280 grams. Aluminum products can be heavier and weigh over 500 grams.

3.6. The dimensions

For every application, the manufacturers offer cable ducts with different dimensions. Small models have dimensions of 50 by 5 by 1.5 cm. Larger models can be up to 110 by 3 by 2 cm in size. Choose a product that offers enough space for all your cables.

Accessories / Equipmentdescription
Separate angle pieces
  • Some manufacturers offer suitable separate elbows for your cable duct.
  • The elbows make it easier for you to lay the cables around corners.
  • An elbow gives you more options when laying the cables and prevents cable breakage when laying around corners.
Bestreichbar
  • If a cable duct is marked as passable, you can paint it with commercially available wall paint.
  • In this way, you can change the color of the cable channels at any time to your liking.
  • First attach the cable duct and then paint the walls together with the cable ducts, they are optically even less noticeable.
3D relief film
  • As a special optical highlight, some cable ducts are covered with a 3D relief film.
  • The foil ensures a visual enhancement.
  • If the cable duct is covered with a 3D-Releiffolie, this can be used as a design element in the room.
Supplied fastening material
  • Some manufacturers supply their cable ducts with the appropriate retaining clips.
  • You do not need to purchase additional fixing material. All required clips are already available.

4. The most important questions about the cable duct

4.1. How can I fix the cable duct?

The cable duct is fastened by drilling, via fastening clips or via a self-adhesive surface, which is applied to the back of the cable duct. You do not need a tool for the attachment using a self-adhesive surface or fastening clips. Otherwise, you must use a drill.

4.2. How can I cut the cable duct?

When laying the cable duct, it is necessary this Cut to the desired length to be able to. Shortening the channels is possible with a standard saw. For more extensive work, however, it is advisable to purchase a special pair of scissors for cable ducts. With this you can work much more comfortable.

4.3. How many cables fit in a cable duct?

Cable duct comparison 2018: duct

Even with a cheap cable channel, it depends on the details.

In virtually all cable ducts should fit at least two lines. However, some models offer significantly more space - for three to five cables.

The final number of cables in the cable duct depends on the diameter of the cables you want to lay.

4.4. How do I install the cable duct?

You can lay your new cable duct on the skirting board on the floor, on the ceiling or along the wall. As a rule, the path is chosen so that you have to use as few cable channels as possible.

4.5. Which are the well-known brands in the field of cable ducts?

You can find the best cable channels from brands like Rehau, Hornbach, Obi and B & M as well as b-tech, Hager, Hama, D-Line and Licatec. With these brands, you can expect to get durable products with good functionality at a reasonable price.

Similar sites

  • Wireless Fairy Lights - Fairy Lights without Cables
  • Routing cables: Laying power cable, marking of conductors
  • Lay bitumen shingles
  • Make the PC fan quieter
  • Lay vinyl flooring - glue and click system
  • Lay carpet and carpet
  • Lay lawn edge stones and place lawn completion stones for the lawn edge
  • Baseboards, baseboards and cable duct at a glance
  • Electric hedge trimmer
  • Electric cooler
  • Electric mowers
  • side cutter
  • Aderendhülsenzange
  • Electric air pump

Video Board: Heavy Duty Cable/Wire/Bolt Cutter Review & Comparison