Polish the car: Correctly polish with car polish

Polish the car: Correctly polish with car polish: polishing

A polish protects the paint and makes it shine in a fresh shine. Not done properly, however, the effect can quickly turn negative. Only the right application and attention to important points brings the desired success and can increase the value of the car.

The nuts and bolts is a thorough washing and cleaning. Even small particles of dirt can leave scratches on the paint when rubbing the polish. Likewise, before that small paint damage repaired and thus protected from rust.

Another important point is the sun. Although many like to go outside in good weather, the car polish should be done in a shady spot. Heated sheet leads to rapid drying and staining.

Correct washing: Car wash before polishing

First of all, the car must be clean so that it can be polished. If dust or sand particles are on the paint, they will at worst scratch the entire paint during the polishing process. Therefore, first drive the car into a car wash or wash it yourself. To do so, first spray it off with the high-pressure cleaner and then rinse with the water jet foam brush Very carefully remove the dirt. Finally, rinse thoroughly with high-pressure cleaner so that neither foam nor dirt remains. Then leather the car with a special leather for cars or dry it with a microfibre towel. Insect scraps, bird droppings and similar tough soiling can be removed with a suitable cloth care products.

Instructions: Car polishing by hand

Polish the car: Correctly polish with car polish: cloth

Before polishing, paint damages are repaired

Anyone who is prepared to invest a little time and effort in the care of their car can easily polish their car by hand. Only a clean, lint-free cloth of microfibre, a polishing cloth or polishing pad and the right car polish are necessary.

But before that it is advisable to repair existing scratches and paint damage. To do this, check the paint after washing Steinschlagschäden, especially in the radiator and hood area. These should be repaired with a paint pen. How to repair damage in difficult areas is shown in the instructions on removing the scratches on the exterior mirror housing. As soon as the new paint has completely dried, the car is polished.

Now you have to decide on the right car polish: Depending on the degree of soiling, the type and the smoothness of the paint, the specialist retailer has different means available. For example, one is enough Hard Wax polish for new cars and cars that have just undergone a thorough cleaning. In contrast, an agent with a low to medium abrasive content for older paints is suitable.

Apply polish

The polish is always applied in the same way:

  1. Apply a dab of polish directly on the paint or in the lint-free cloth and rub in the car evenly. The result is a milky layer, which should not be too thick, but must be uniform. Be sure not to rub Kunsstoffanbauteile, headlights and discs. These otherwise have to be cleaned afterwards and may be attacked.
  2. Then let the polish coat dry until a uniform, dry, milky white layer has formed on the car.
  3. Now the polishing starts.

Polishing by hand

Take the (clean!) Polishing cotton or the polishing cloth to hand and rub slowly and forcefully in circular motions from the polish. Once the polishing pad or cloth is dirty, take either a new corner or the next cloth.

Based on the pollution of the polishing cloth or the polishing pad, you can see how much dirt was actually stuck in your paint. The polishing result can be checked immediately as soon as you have rubbed off the polish.

When you have finished polishing the car, go around checking the car a few times, looking at the surfaces especially in the cut. How to find gradually all the political remains. Also, make sure you have left all plastic parts, lights and windows clean. Polish residues should be removed with a damp cloth.

Car polish with the polishing machine

Polishing machines require a certain amount of practice, but do much of the work. Because of the rotation of the polishing plate a mechanical depth effect of the polish is achieved, which is far superior to a hand polish. Especially with heavily weathered paints should therefore be resorted to a machine paint care.

Machine polishing: first operation

Polish the car: Correctly polish with car polish: polishing

On edges and corners you should exercise only slight pressure with the polishing machine.

Wear the Polish on the polishing hood and moisten them with a little water from the spray bottle. In this way, the agent distributes more evenly on the paint. Then run the machine at medium speed in a circular motion over the entire paint surface. Make sure that the polishing sponge of the device is always sufficiently wet with polish and moist enough to cool the paint sufficiently. In this way, the whole car is polished gradually. In the last step you have to manually polish all places of the car that were not accessible with the machine.

This should be noted when polishing car polish with polishing machines:

  • Apply light pressure, do not let the machine go
  • Do not polish too much over edges, so you can "polish" the paint easily.
  • Do not polish over plastic parts and discs
  • Do not edit the same spot for too long

Repolishing: second operation

To repolish, put on a fresh polishing cover and finally bring the paint to a high gloss. Press lightly. Once you have removed all the polish remnants, your car will shine again in new splendor.

Polishing machine test: Correct polishing

Polish the car: Correctly polish with car polish: polish

Polish cars by hand, especially with regular car care, really exhausting. The polish goes faster with one special polishing machinee. However, car owners should pay great attention to quality, so that they enjoy their freshly polished vehicle after work. We will show you which polishing machine will make your car shine again and tell us in our polishing machine test which equipment is your money worth and deliver a good result.

Car grow or not grow?

Waxing is in principle the same as polishing, but it is no longer necessary for every car. Modern metallic paints are protected with a clear coat layer and do not need a sealant. As a rule, they also need to be polished much less frequently. This looks different with so-called "un-lacquers": their structure is determined by the PoliervorganTo wax, wash your car again and carry out the polishing procedure, mechanically or manually, following the familiar pattern of paint protection wax. Old paints are sustainably preserved and retain their shine.

Similar sites

  • Parquet oil, grow or seal
  • Car Fire Extinguisher Test - Fire extinguisher for the car in comparison test
  • Polish gelcoat - instructions
  • Clean and polish marble floor - sand natural stone floor
  • Paint aluminum
  • Tinker cars
  • Polishing machines test: polish properly
  • Hang and arrange pictures properly
  • Soldering iron test and price comparison: soldering iron, gas soldering iron and battery soldering iron in
  • Auto-seal and auto-paint seal with nano-seal
  • Car Battery Charger
  • Auto-Dehydrator
  • Third hand
  • car polish

Video Board: How To Polish A Car - Car Polishing w/ Harbor Freight DA Polisher Car Detailing and Cleaning!