Process cement mortar

Processing, coloring and more

Process cement mortar: process

Cement mortar is versatile: it is suitable for the Repair of defective masonry, bricks such as bricks or sandstones as well as plaster in the interior and exterior.

It is often used for cellar walls or vaults, as well as Plinth plaster or for pouring anchor holes, Although the building material is not quite as easy to work with, it is ahead of the other types of mortar.

We explain exactly how you can process cement mortar and consider what to look for when coloring it. Also to the Topics Lime Cement Mortar and Trass Cement Mortar you will find help.

Process cement mortar

Surface:

The underground must free of dirt, dust, and efflorescence his. In addition, it must be stable and completely dry. Highly absorbent surfaces are treated in advance with a bonding emulsion.

Temperature:

Process cement mortar: process

The wall was processed with masonry mortar

Only use cement mortar at temperatures over 5 and under 30 degrees Celsius.

Processing:

Cement mortar belongs to mortar group III and is going out 3 to 4 room parts sand, one part cement and water according to the rule of thumb mixed.

Wear that Apply mortar evenly using a spatula or trowel (application thickness between 10 and 15 mm) and simply wipe off the surplus mortar.

Now you only have to protect the plant from excessive moisture loss - ie from sun and frost.

Rule of thumb for the addition of water:

For the amount of water, the rule of thumb is that half a kilogram of water is required per kilogram of cement or lime.

Caution: Avoid using skin and eye contact with cement mortar. The building material is alkaline when wet - this means it can cause burns.

Color the cement mortar

Cement mortar is not in any color colorable. Umber, orange and ocher are ideal for visually enhancing mortar.

For this you need color pigments, the so-called oxide types, These can easily be added to the raw mortar and you can see the final color.

Lime-cement mortar

Cold cement mortar is too two parts of lime (hydraulic lime, hydrated lime), eight parts of sand and to a part of cement. It is easier to work with but less resistant. Thanks to its flexible application options, it is considered a universal mortar.

Trass-cement mortar

Trass cement mortar is easy to apply, adheres well, hardens but slower due to the high proportion of trass as other types of mortar.

He is suitable for that Masonry and plastering of natural stones and for laying steps, paving stones or natural stone slabs.

Similar sites

  • Summer berries - strawberries, raspberries and redcurrants for harvesting berries in summer
  • Gutters for every roof and gutter type
  • Glass bricks and plastic bricks - Building glass brick walls
  • Trass-cement
  • Cement: cement production and special cement
  • Color epoxy
  • Lawn Care - Scarifying, Aerating, Sowing, Mulching, Fertilizing, Lawning and Watering
  • Clay Clay Processing: Instructions and properties of clay plaster and clay color
  • Process lime cement plaster
  • Renovation fleece: properties and workmanship
  • This is how a decoupling mat for floor coverings works
  • Processing of cotton plaster and wall tattoos
  • Paving stones are self-made - plaster and seal
  • Grow, harvest and process the plums

Video Board: Cement Plaster on Masonry Wall I Cement Mortar Plaster I Wall Plastering I The Complete Process