Sew chair cushions to improve seating comfort and appearance

Naked seats made of wood or mesh are often perceived as hard and uncomfortable. The sewing of chair cushions without much effort remedy. In addition to the seating comfort, the look of the chair is upgraded at the same time. Some special features should be considered with the chair cushion to ensure the sitting pleasure.

Uncomfortable upholstery

Chairs can be upholstered or provided with matching cushions to make sitting and leaning surfaces soft and comfortable. Covers usually require more effort and cost more than a self-sew

Another important feature is the ability to clean. If the pillowcases are sewn off peelable, eliminates the costly cleaning of chair cushions. The removable covers can be washed, depending on the type of fabric, in the washing machine or in hand wash.

Filler and mold

The inlay of a chair cushion is most easily produced by foam. Flat mats can be selected in the thickness of the chair dimensions and the personal comfort feeling. Stuffed or made of small parts inlays are less suitable as a seat cushion, because they deform and provoke uncomfortable seating situations.

As an ideal form, upholstery of all kinds should not exist on the immediate usable area of ​​the chair cushions. For edge molding and buttoned designs, care must be taken that the center of the seat is not lower than the pillow edges. Otherwise, with a counterbalanced mid-surface, the sitting position can lead to discomfort, even pushing the blood circulation in the legs and feet.

How to sew chair cushions

  • Foam mat or plate
  • upholstery fabric
  • Matching yarn
  • Velcro closures or buttons
  • sewing machine
  • shears
  • pins

1. Adjust inlay

Your chair will give you the appropriate dimensions. Cut the foam mat so that your later cushion is at least flush with the front edge of the seat. A slight overhang tends to be better than too short a cushion. Test the seating feeling before sewing the cover.

2. Make an outline sketch

A cutting sketch helps you with planning and cutting. In principle, it is a double square or rectangle to which the inlay thickness must be added laterally and at the ends. You must add two centimeters of hem allowance at each cut edge. If your inlay is to be closed opaque by simply placing it without buttons or Velcro fasteners, a fabric bottle of about one third of the seat depth is required.

3. Cut fabric

Depending on the mechanism selected, you will need to consider one third of the seat depth when cutting. For button or Velcro closures this substance addition is omitted. Here, shorter fabric overlaps adapted to the closure sizes are "left standing". From the resulting waste, you can cut two cloth ribbons, which are used to later tie the chair cushion.

4. Hemming and sewing

Fold the cut fabric so that the front seat edge is made of folded fabric and the open side faces the backrest. Fringe the side edges and sew them together in the second step.

5. Fastening straps and closure

Before sewing the back of the pillow, place the fabric ribbons between the two fabric layers. Velcro fastenings, buttons or fabric trim complete your sewing work.

Tips & Tricks

As a more practical alternative, you can sew chair covers for backrests, which will hold their own by their hood shape.

Video Board: Aylio Coccyx Comfort Wedge Cushion for Car Seat Review - Ask Doctor Jo