Costs and prices for the elevator

A passenger lift causes a lot of planning, but also costs. Not only the acquisition costs are a factor, the maintenance of the electricity costs up to the regular maintenance can also burden the budget considerably. Here are some rough cost examples for passenger lifts and their maintenance.

Size, capacity and comfort

General prices are hardly to call in a passenger elevator. Decisive is the effort that must be made for a possible retrofit or a new building. These factors determine the price of a passenger elevator:

  • head
  • payload
  • persons
  • New building or subsequent elevator construction
  • shaft size
  • cabin size
  • cabin equipment
  • Power unit
  • control
  • security concept

to keep an overview

If a lift is planned, you lose the layman quite quickly overview. The number of available types and manufacturers is confusing and the safety regulations complicate the assessment in addition. If you want to apply for a lift for the lift, you have to adhere to the rules and conditions to the letter.

It is important to have an independent and professional advice, if you yourself are inexperienced, so that the elevator later really offers the hoped-for benefits in terms of barrier-free living.

Retrofit elevator

If a lift is to be retrofitted in a single-family home, this requires individual planning in each case. The space for the elevator shaft is usually severely limited and some modifications must be made.

Roughly, a simple lift with no great comfort can already be expected to cost around 40,000 to 50,000 euros. Special requirements or special comfort, such as a glass elevator, quickly raise the price to around € 100,000.

Shaft already exists

A simple lift, which has a payload of up to 450 kilos and can carry about six people, costs about 20,000 for an existing elevator shaft. If an elevator shaft has to be built, this lift will cost about 30,000 euros. However, this calculation example works only if there is sufficient space and it is, for example, a new building.

drive method

A distinction is made between a hydraulic lift and a cable lift. The hydraulic lift offers several advantages in terms of structural requirements. In addition, the initial cost is lower than a cable lift.

Here are some facts about the differences between rope and hydraulic lift:

  • Hydraulic lift provides conveying speed up to about ten meters per second
  • Cable lift costs more in purchase
  • Cable lift offers lower energy costs during operation
  • Hydraulic lift facilitates the replacement of parts
  • Soundproofing for hydraulic lift better
  • Engine room can be installed up to eight meters from the hydraulic elevator

Maintenance costs and maintenance

Even before the purchase, a wide range of energy-efficient lift models can be used today. Of course, some manufacturers often offer the older, not-so-economical models a little cheaper, but if the elevator is to be used for many years, this saving is quickly lost again.

Passenger elevator - examples

These examples have always been planned in a new building from the beginning. This eliminates any modifications and adjustments, which lowers prices.

Elevator 15 meters head
7 stops
Assembly fee 7,000 EUR
Complete 50,000 EUR

Elevator shaft available
2 floors
Assembly fee 2.500 EUR
Complete 20,000 EUR

Elevator shaft available
3 floors
Assembly fee 3,000 EUR
Fully 25,000 EUR

Lift with platform for wheelchair
up to 3 meters head
Assembly fee 2.500 EUR
Complete 18,000 EUR

Tips & Tricks

The competition is also quite large among the manufacturers of elevators. Many manufacturers are therefore prepared to carry out the maintenance free of charge within the first three years, for example. Nevertheless, you should check whether this discount does not end up on the installation price.

Video Board: Home elevator low cost മലയാളികളുടെ അഭിമനമായ Ec product. അവരുടെ പുതിയ Product