Crafting instructions for Christmas angels

Christmas angels made of paper and wood

Crafting instructions for Christmas angels: angels

The finished Christmas angel made of paper

At Christmas, many families decorate their homes and apartments colorful christmas decorationthey on the tune in winter time leaves. In particular, the colorfully decorated Christmas tree contributes to the wintry-harmonic effect.

But even smaller decorations can be one Christmas atmosphere in your home create. In addition, our Christmas angels find a place anywhere in the house - at the window, on the shelf or even as jewelry on the Christmas tree.

We show you in the following instructions step by stepHow to make a magical Christmas decoration made of paper or wood together with your child!

Crafting instructions for a Christmas angel made of paper

materials

  • Clay or folding paper in white
  • pencil
  • colored pencils
  • ruler
  • scissors
  • Liquid glue or glue stick

Tip: Instead of the clay paper, you can also use simple folding paper. This makes it easier to fold the poinsettia.

Step 1

As a first step, draw the Outer contours of the angel as well as the head and the feet on white construction paper or white cardboard. Then draw a big and two little stars on yellow paper.

Crafting instructions for Christmas angels: angels

Draw the angel head and feet on white paper

Crafting instructions for Christmas angels: angels

Cut out all items of the Christmas angel

step 2

Glue the two little stars on the shoes and the big star in the middle of the angel's wings.

Crafting instructions for Christmas angels: crafting

Stick the little stars on the shoes of the Christmas angel.

Crafting instructions for Christmas angels: instructions

Stick the big star on the middle of the wings and the little stars on the shoes.

step 3

Finally, stick with one Glue stick all parts together, Your Christmas angel is ready!

Crafting instructions for Christmas angels: angels

The finished Christmas angel made of paper

Attention: The deco must not be hung together with candles on the Christmas tree. Here there is an acute fire hazard.

Crafting instructions for a Christmas angel made of wood

Crafting instructions for Christmas angels: christmas

Two finished wooden angels

In the Advent season, angels and angelic choirs have a permanent place. They come in many different shapes and forms. The Christmas angel, for example, becomes Emphasis on his heavenly character always shown with wings.

You can use the following wood angel within less hours from a conventional log tinker and then design individually according to your ideas.

materials

  • 1 log
  • 1 styrofoam ball
  • 1 long nail
  • White craft carton
  • Colored woolen cord
  • Hot glue gun
  • hammer
  • Strukturpaste
  • brush
  • Alleskleber
  • Possibly. wadding
  • Possibly. markers

Tip: For the Christmas angels you can use a log in any size. Ideally, the height is about 25 to 35 cm. Clean the wood with a brush before tinkering to remove dirt and remove protruding chips.

Preheat the hot glue gun

Preheat the hot glue gun. To do this, place the Hot glue stick into the gun and close it afterwards on. After about 7 to 10 minutes, the glue has reached the correct temperature and can be used. During this time you can make the wings and the head for the wood angel.

Attention: Make sure that when working with children always an adult is present as a supervisor when working with a hot glue gun!

Wing of the angel

To make the wings, Draw any angel wings on white, stable craft cardboard, You can decide freely whether you want to create a round or an angular shape.

Tip: It is important that the two wings are as symmetrical as possible. Ideally, draw a wing on paper, then cut it out and transfer it to the photo carton. Then turn your paper template and record the other wing mirrored next to the first wing. If you then cut out both wings, they should be exactly symmetrical.

To the angel now act three-dimensional to let carry with you Brush the structure paste on the front on. If the front side has dried, decorate the back as well. For soft wings, then coat the cardboard with an all-purpose adhesive and glue cotton wool on both sides of the wings.

As soon as the hot glue reaches the right temperature, apply it carefullye angel wings and then stick them on the log.

Head of the angel

Now hit a long nail in the middle of the top of the log. Be careful not to knock the nail too deep into the log so that you can sufficient space for fixing the polystyrene ball remains.

Tip: To test whether there is enough space, beat a piece of the nail into the wood and then place the styrofoam ball on the nail head. If the nail is too long, remove the ball and lower the nail to the desired length.

Once you have found the ideal length of the nail, put the ball back on top, then decorate with structure paste and let it dry. Instead of Structure paste also allows you to face the styrofoam ball to paint.

Wreath of the angel

Then it turns into a colored string of wool little wreath for the Christmas angel tinkered. Alternatively, you can also tie the headdress with bast or other materials.

When the styrofoam ball has dried, brush with it Hot or all-purpose glue and press the wreath then firmly to the head.

Tip: Make sure that the splices are clean, dry, free of dust and grease for an optimal gluing result!

Now give one moren blob of glue on the hole of the ball and press them on the nail to make the head stable.

Now wait until the glue has hardened. Your Christmas angel is ready!

Crafting instructions for a devil made of wood

Crafting instructions for Christmas angels: crafting

The devil and the angel next to each other

For those who are not just one Christmas angels, but also a little devil tinker We have created a supplementary guide here.

You will need the same materials as for the angel and additionally the following items.

Additional materials

In addition to the materials you need to build the wooden log angel, the following material is required:

  • Toothpick for the horns
  • Red color
  • Two narrow, short pieces of wood for the arms (from residual wood)

Crafting instructions for a devil

Also for this crafting you should do that First clean the wood with a brushso that it is free of dirt and splinters. After that hit a long nail to fasten the head in the middle of the wooden log and put the Styroporkugen on.

Then fasten the two wooden arms with short nails on the side of the log. This will give you one high strength and prevent the arms from falling off can. Finally, design the Devil's Head.

For this you can use the Decorate polystyrene ball with either texture paste (See the instructions for crafting an angel) or paint a face with the devil with a felt-tip pen. Likewise, you then paint a toothpick with red paint and halve it.

Once everything has dried, put the two toothpick halves as devil horns in the styrofoam ball. Give a dab of glue in the hole of the ball and fix this on the nail, Already the little devil and the Christmas angel are finished!

Tip: If you want to make the devil in typical colors, just paint all wood and Styrofoam parts in a bright red and a dark black. Depending on the hiding power of the paint, several coats may be required.

Have fun crafting!

Similar sites

  • Tinker with paper, scissors and glue
  • Tinker lampshade yourself
  • Tinker folding cards
  • Tinker with wood
  • Picture frame construction instructions: Making picture frames
  • Make butterfly - butterflies made of felt, paper and artwork
  • Building pallet chairs - construction manual for garden armchairs made of pallets
  • Tinker angels
  • Make Easter baskets
  • Tinkering for the beginning of school and school enrollment
  • Tinker cardboard lantern
  • Tinker snowflakes and snow stars
  • Build your own game tower: Spielhaus construction manual
  • Tinker and sew easter bunnies - pattern and print template

Video Board: Dollar Tree Christmas Angels - DIY Christmas crafting- Beautiful Gift idea and Craft