Decoration Foils - Renovate and decorate with modern decorative foils

Apply deco film - preparation

To achieve a perfect result, the following points should be noted. Prerequisite for a good gluing result is a Smooth, completely dust and grease-free surface, Uneven surfaces must be smoothed by sanding (removing dust particles!), Untreated wood and chipboard and plywood should be pre-treated with a primer (acrylic base). The tools needed are pencil, ruler or folding rule, scissors or craft knife, a soft cloth or rubber squeegee, and possibly a hair dryer.

Self-adhesive decorative films knows almost every z. B. as a protective cover of books or as a replacement surface for ripped children's room doors. For many, they are considered obsolete, conservative and old-fashioned. They offer in the field of interior decoration almost unlimited possibilities of individual creative design.

Design with decorative foils and design foils

Decoration Foils - Renovate and decorate with modern decorative foils: foils

There are countless modern decorative and design foils Designs, structures and colors, supplemented with special foils for z. B. the use in the kitchen or bathroom, in standardized special sizes for door renovation, as mirror films or in the border print. Decorative films cover the entire range of creative interior decoration, modernization and design and often save the expensive new purchase of furniture and other furnishings. Many useful design and processing tips can be given to handymen in practical brochures.

Dekofolien- applications

Decoration Foils - Renovate and decorate with modern decorative foils: renovate

Due to their versatile applications and ease of use, deco films are extremely popular. The fact that this potential is far from exhausted is primarily due to the negative image of the product in the home improvement. Today's designs are too good a deal to "just" design kitchen or linen cabinets or spice up plywood boxes into simple furniture. They take into account all current living world wishes and pick up the latest trends. This is the imaginative decoration of traditional-classical over stylish-elegant to playful or top-modern no limits, such as completely up-to-date, embossed checker plate or hufnagel decorative foils.

Dekofolien - Absolutely easy to process

The renovation or beautification method has the advantage that films can be processed very easily, only a few tools are needed and hardly creates dirt when working. In addition, films adhere to almost all surfaces, including on Glass, metal and laminated woods.

Attach decorative foil

Decoration Foils - Renovate and decorate with modern decorative foils: renovate

First, the Size of required film measured, any supernatants added (2 to 3 cm) and marked on the back with a pen. Helpful is the printed centimeter grid. Long, straight cuts are best made with a craft knife along the ruler, with curved lines the scissors are used. To cleanly stick the film, the backing paper is loosened about 5 cm and the film is applied exactly to the desired surface; it should be started with the edge, The remaining backing paper is then removed slowly and evenly with one hand, and the film smoothed evenly from the center to the edges with a soft cloth or rubber squeegee. Errors during cutting or processing can still be corrected after gluing with some films. They are provided with a special dispersion adhesive and the film can be removed and glued for several hours, depending on the substrate before the full adhesive power is reached.

Dekofolie: processing tips

  • Pierce air bubbles with a needle and press the film towards the hole.
  • Cut straight corners at a 45° angle with a 3-4 cm addition.
  • Jointless pile joints can be achieved by gluing the sheets 5 mm overlapping and cutting them together. Remove excess film and press down.
  • Rounded edges can be pasted by heating the film with a hair dryer, pulling it and pressing it quickly. Until cooling, the film must be pressed with a rag. Another method: small pieces of cake are cut out of the supernatant, the resulting prongs can then be easily pulled around the edge.
  • Precise and straight edges are achieved when the film is cut with a protrusion of about 4 mm and this is cut off after bonding with a craft knife.
  • The edge area can be reinforced with the help of a plasticizer resistant Kraftklebesr or if the glued foil at the lowest level ironed while a piece of paper between iron and foil is placed.
  • Wet bonding is the best processing method for large, smooth surfaces (especially glass). To do this, moisten the surface with detergent-mixed water and completely peel off the backing paper. The film can be moved on the water film until the exact position is reached. Water and air are then pushed out to the sides under the film.
  • The removal of the film is not a problem because it can be easily removed after heating with the help of a hair dryer. Glue residues may be removed with an alcohol-based solvent (e.g., window cleaner), possibly with rinse aid added.
  • Cleaning and care of the glued new surfaces is possible with water and detergent. For persistent dirt alcohol / methylated spirits can be used, eg. B. at the exit of adhesive at the edges.

Similar sites

  • Tinker and decorate boxes
  • Converging: Tips to Design the Single Apartment in a Cuddly Nest for Two
  • Build sliding door yourself
  • Fairy lights and Christmas lights
  • Construction manual for a modern LED candle arch
  • Blow out eggs - instructions and helpful tips
  • Sun protection assembly: Useful tips
  • Roof terrace design - tips for your Outlook oasis
  • Foil greenhouse Construction instructions: Build foil tunnel and greenhouse with foil coating
  • Renovate wooden staircase
  • Renovate the kitchen: tips for a successful implementation
  • Wallpaper stickers and wall stickers
  • Cover door with foil
  • First own apartement
  • Sun protection film for windows

Video Board: Dining room renovation using aluminium foil as wallpaper // featured in Right this minute