Epoxy resin for terrarium construction

Even with a terrarium that reproduces a steppe landscape for its inhabitants, it is better to protect the entire interior and the OSB boards with epoxy resin. The food animals would otherwise eat small caves to escape the actual inhabitants of the terrarium. Because of the great hardness after curing, epoxy is ideal for any kind of terrarium.

moisture protection

However, extreme moisture protection is also provided by lamination with epoxy resin. The clear translucent epoxy will be just as waterproof after drying and full cure as glass, but it will not break if hit with a hammer. So there is no ideal product for terrarium or aquarium to protect the animal and its home.

Mold construction in the terrarium

Three-dimensional shapes, such as caves or wide seating surfaces, can also be sealed with epoxy. Styrofoam or wood can be used for this purpose. Then the mold is painted with epoxy. During processing, however, attention must always be paid to a perfect mixing ratio. Otherwise, it may happen that the mold does not cure fully later and may remain slightly sticky.

Dosing hardener correctly

Before processing comes the calculation. The amount of hardener must correspond exactly to the manufacturer's instructions. Therefore, 2-component products are always a bit tricky to work with, but the result speaks for itself.

Stir small amounts

2-component epoxy resin compounds have a very short dripping time. That is, they are usually only about half an hour to work on. Therefore, the builder should always mix only small amounts to work on his terrarium, so that he does not have to dispose of the expensive product.

Sealing of various surfaces

The surface of almost any material can be permanently and safely sealed with epoxy resin. After drying and curing, the product is not only impact-resistant, but also hygienic and food-safe. Therefore, there is currently no better product for pet owners to protect the animal and its environment than epoxy resin. Here are some examples of materials that can be coated:

  • Wood
  • OSB
  • Put
  • Styrofoam
  • plastic
  • metal

Varnish or dye

The epoxy can then be painted, but only special colors are suitable. If the protective properties for the animal are to be preserved, it is better to color the epoxy beforehand.

It is even more ideal if the three-dimensional shape or the back wall of the terrarium is already painted before the coating. For replicas of rocks one can very well polish styrofoam with tile adhesive. This structure is then sealed with epoxy.

Tips & Tricks

If you are building three-dimensional Styrofoam shapes yourself, use Epoxy on lollypipes when laminating so they do not stick. Only on the second pass do you laminate this page with the small holes.

Video Board: How to Make Miniature Underwater Dystopian Cityscapes!