Polish granite tiles and boards expertly and successfully

Granite is one of the grown natural stones, is very hard, but also open-pored. The sanding of granite tiles is therefore rarely done, but granite tiles are polished regularly and can be impregnated from time to time. Below you will find everything you need to know about granite tiles, their treatment and especially the polishing and impregnation of granite.

The outstanding attributes of granite

Granite is one of the oldest and hardest rocks. It is usually made of rock, mica and quartz. The colors of the hard rock range from pale gray to dark blue and from delicate yellow to brownish red. Granite is extremely resistant and even acid-resistant. In addition, it is also heat resistant and cut resistant. That is why granite slabs and tiles often find their way into kitchens as worktops. But granite is also an open-pored rock.

Granite tiles and slabs must be regularly polished and impregnated

If granite is not regularly impregnated, oils and fats can penetrate quickly. Since these substances enter the stone, they are very difficult to remove. Although they would evaporate, but this could take many years and then also assume that the stone is no longer impregnated. That's why the right treatment of granite tiles is important from the start. Their granite tiles not only get their deep shine - the stone literally gets more beautiful with every polishing and impregnation.

Pay attention to the choice of suitable polishes, cleaning agents and impregnations for granite

Use special granite care products. Alternatively, you can also use ammonia. But just after laying the granite tiles, time should not matter to you. First, the stone must release previously stored moisture. With granite this can take between two and three months - which partly depends on the weather conditions. So before you start to care for the granite tiles, you should give the stone enough time. So until the bottom is finally impregnated, you should be very careful. With intensive committing as well as with fats and oils with granite tiles as work surfaces.

Granite must first dry completely

You can detect the moisture of the granite with appropriate moisture meters. However, it is precisely here that reasonably reliable measuring devices are extremely expensive and therefore hardly worthwhile. However, over time you will get a feel for your granite tiles. They then recognize moist granite by the presence of spots. But if the granite tiles have dried through, you can start polishing and impregnating. Clean the granite floor according to the instructions of the manufacturer of the granite cleaner. Many of these cleaners are also the polish.

Polishing and impregnating granite is important - when the stone is dry

Finally, impregnate the granite tiles again with an impregnation that is especially suitable for granite floors and tiles. Dau also includes numerous hard oils and waxes. They feed well in the stone and protect it that way. Of course, how long the impregnation takes depends on the medium used. In addition, you can polish and clean granite tiles regularly. As a result, the impregnation is at least partially mechanically removed. But not as extreme as a seal, which is only on the stone, while an impregnation draws in. Over the years you will be able to appreciate the optimal cleaning and polish widths as well as the impregnation of the granite tiles.

Tips & Tricks

There are deep gloss products for natural stones. You can not use them indiscriminately on any granite floor. The paint enhancers are used on absorbent stones, such as flamed, polished or natural gray. If the granite tiles are polished, you can not use the color intensifiers.

It is extremely important that you give the granite tiles and slabs enough time to dry completely. Otherwise, trapped moisture can lead to rusting. To remove this rust from the stone is many times more difficult than a professional treatment. Granite is simply a very old stone. Accordingly, it should not be for a few days or weeks if you want to enjoy your granite tiles or plates for life.

Granite tiles have a thickness between 0.8 and 1.2 cm. From 1.2 cm, it is then granite slabs. Plates as well as tiles can be calibrated (exactly cut), but they do not have to be.

Video Board: Search the Sky by Frederik Pohl and C. M. Kornbluth