Change joint color - 3 different options

Whether you no longer like the color of the joints in the bathroom after a while, or perhaps the joints in the entrance area were polluted by numerous shoes. The color of the tile joints can be changed with special joint colors. That does a bit of work, but it also lasts a long time.

Consider options for changing the joint color

There are several ways to change the color of the joints between the tiles. Either re-paint the joints themselves to change the joint color, or just renew the joints and re-grout in the selected joint color. This variant holds for sure the longest, but makes a lot of work because of the many preparatory work.


There are special joint tapes with which the joint color can be changed. Of course, it is much faster if you simply stick an adhesive strip over the joint. However, the result is at least as shabby after a short time as before.

joint pin

For white joints, there are practical joint pins that can quickly restore the old white state. Really change the color of the joint but not. Only dirty or yellowed formerly white joints can be lightened again.

The pens are certainly useful for small areas, but the purchase is not worth it for the whole wall. The joint pin must be used again in quite short intervals, because the color does not last long.

Comprehensive preparatory work

No matter which method you prefer, the largest share is always the preliminary work. If a new grout is grouted between the tiles, the old joint must first be cut out. However, if you want to paint the joint, you must tap the tiles well along the joints.

In addition, the joints must still be thoroughly degreased and cleaned. It is best to sand it with sandpaper before the action.

Tips & Tricks

If you have the time and the know-how to completely renew the joints, you should prefer this option. If the joints are only painted over in a different color, parts of the paint can be damaged during cleaning. Within a short time, the joints look like a patchwork quilt.

Video Board: Heat Shrink Cable Joint - 11kV 3 Core XLPE & EPR High Voltage Cable Joints