Instructions how to repair the exterior plaster

Damage in the plaster should be repaired as soon as possible, as otherwise moisture may penetrate into the building and quickly the building fabric may suffer from damaged plaster. If you do it skillfully, damage in the plaster is no problem.

Not only before re-plastering needs to be repaired

Damage in the plaster you must not be pending - even at first minor damage can quickly cause the plaster over a large area peel off, moreover, the building is no longer protected from moisture and the weather with damaged plaster and can be damaged so quickly then often with difficulty and patience can be eliminated again. You can avoid that.

Procedure for the plaster repair

Step 1: First check the entire outer wall for damage, loose spots or cavities. If you ever have to repair external plaster, you can fight back even the small beginnings and repair all damages immediately.

Step 2: Once you've discovered damage, carefully tap the area around the damage and make sure the damage reaches the point. Everything that is loose here should be removed in any case. Under certain circumstances, even larger cavities will show up. These should also be completely uncovered.

Step 3: Completely coat all exposed damage with the appropriate plaster base and let it dry. Which plaster base is suitable, you can either ask the expert - in case of doubt, always take the one that was also used before applying the flush on your building. In any case, it should be impregnating.

Step 4: When the plaster base has dried, you can fill in the exposed areas. In most cases, a foam cord proves to be suitable. About the foam cord is once again saturated primer painted and then introduced a joint filler. When it has hardened, you can apply the plaster again in the same structure as it was originally available - ie all flush and topcoat layers - and smooth again.

Video Board: How To Patch Stucco. Simple Instructions Patching Stucco.