Japan saw comparison 2018

Purchase advice for Japan saw comparison or test 2018

  • The Japanese saw is a fine train sawwhy it differs from other popular fine saws, such as the foxtail or the frame saw.
  • By the pulling technique are especially straight and precise cuts in wood or plastic possible. The saw blade is very thin and flexible - so using a Japanese saw requires some practice. Beginners or laymen should handle the saws carefully.
  • First and foremost, the Japanese saw enjoys great popularity in gardening, model making, simple carpentry and other fine work. Unlike many western wood saws, the Japanese saw can be for woods of all kinds (also hardwoods) and plastic usebecause the saw blade is made of harder steel.

Japan saw comparison 2018: comparison

If you work a lot with wood, the rustic saws quickly reach their limits when it comes to precise and clean cuts. In addition to the European fretsaw, carpentry and hobby workshops are increasingly using a fine saw from the Far East: the Japanese saw, tooNokogiri called (Japanese for "saw").

But Saw is not the same saw, as various Japansäge tests reveal. It depends on which cuts and which precision are desired to be able to decide between the categories Ryoba, Kataba and Dozuki. Which of these species is the best Japanese saw and what you should pay attention to, among other things, the saw blade, you will learn in our sleek Japan saw comparison 2018.

1. The Japanese saw: If it may be a bit more precise

Japan saw comparison 2018: saws

Big in Japan: Folding Japan saws can often be used with different saw blades.

Precise and clean cuts of any type of wood do not necessarily require European fine saws like the foxtail or the fretsaw.

Carpenters, carpenters and model makers like to use Japanese fine saws, which possess extremely sharp saw blades, While normal wood saws are mainly pushed and therefore have a thicker saw blade, the Japanese saw is pulled.

The saw blades are very thin and flexible. Therefore, working with a Japanese saw requires some practice and is less suitable for beginners. The risk of injury is much greater for inexperienced people than with conventional wood saws.

Save strength! Due to the pulling technique and the sharp teeth, less force has to be applied overall and sawing is faster and easier by hand. The very fine cuts also cause less sawdust.

2. Dozuki, Ryoba or Kataba - which type is the best Japanese saw for which purpose?

There are three main types of Japanese fine saws. In the following, we would like to explain to you in our purchase advice which Japanese saw you should best use:

2.1. Dozuki

Japan saw comparison 2018: japan

Backbone: The Dozuki Japansaw is perfect for clean cuts, but does not go very deep.

Translated from Japanese meansDozuki "Saw with a hull". Due to the one-sided gearing and the stabilizing back can be very precise cuts with the sharp saw blade make.

The Dozuki saw can not cut particularly deeply, which is why this Japanese saw mainly finds for fine work and model making Use. This type of Japanese saw is most comparable to the European fretsaw and also suitable for the inexperienced.

2.2. kataba

Japan saw comparison 2018: japan

Be careful, flexible: The Kataba Japanese Saw is perfect for deep and big cuts in woods of all kinds.

Also one-sided interlocked, but with inmore stable back provided is the Kataba saw. Therefore, the application of the Kataba saw requires some practice because it puts too much pressure bend or break easily can.

In Japan, the Kataba is often used as a tree saw, but is also used in carpentry and in the carpenter in use. Comparable is the Kataba saw with European branch saws or wooden hand saws. Go with the Kataba sawbig and deep cuts into the wood easily by hand.

2.3. Ryoba

Japan saw comparison 2018: japanese

Double saws better: A Ryoba Japanese saw can longitudinal as well as transverse to the fiber be used.

The Ryoba saw owns Sharp teeth on both sides of the saw blade, With a Ryoba hand saw you can work on all types of wood.

On the one hand is with triangular teeth, on the other side with Crosscut teeth worked. While the former side is used for cuts along the length of the fiber, the other side can be sawn across and at an angle.

Because, unlike the Kataba- and Dozuki saws, a reinforcing spine is missing, the blade is much thicker. That's why the Ryoba saw is ideal for deep cuts in solid wood and less suitable for fine, precise cuts.

The different variants of the Japanese saw at a glance:

Japan saw comparison 2018: 2018

3. Buying advice based on the right criteria: You should pay attention to the following

So you can quickly find your own Japanese Saw Test Winner, there are a few factors to consider. The following chapter tells you what it's all about if you want to buy a Japanese saw.

3.1. Weight and dimensions

Bast, Bast - we need bast!

In order to make the guide of the saw pleasant, handles on Japanese saws are rather elongated. Typically, the handles are made with traditional saws Rattan, hinoki wood or raffia, This makes the saws very light.

Especially if the saw is used longer, its own weight can quickly lead to your physical limits. However, most of Japan's saws are pretty light at around 200 g, and that's what they want to work with precisely.

The saw blade and the saw should not be too long overall, so that even smaller cuts can be handled. If you prefer to use the Japanese saw for gardening and pruning, look for thicker and longer blades, These may then have, for example, a length of over 60 cm and a thickness of about 0.7 mm. In principle, however, the Japanese saw is intended for finer than rustic work.

3.2. gearing

Depending on whether the saws are intended for cross sections or longitudinal cuts, another toothing is recommended. The following table shows which teeth of the tools are most suitable for which purposes:


Japan saw comparison 2018: comparison

Typical of train saws and especially Japanese saws is the triangular toothing. This special gearing is used for clean cuts along the fiber of the wood used and facilitates the bleed significantly compared to other wood saws.

The slightly entangled triangular teeth can not cut so precisely.

Japan saw comparison 2018: comparison

Although with a trapezoidal toothing in principle can be sawed on train and pressure, but beginners should be very careful. Because the saw blade is very thin, it can quickly happen that the blade is bent or even cracked when pressure is applied.

With a trapezoidal toothing are very accurate cuts possible.

Japan saw comparison 2018: saws

A combination of both types of teeth represents the universal toothing. If you want to get used to the Japanese saws slowly, you are well advised with the universal toothing and can do little wrong, because with this type of toothing Cuts along and across the fiber possible are.

You can not decide? Alternatively, a Japanese saw set can be used, which includes different saws with different teeth.

3.3. restriction

Japan saw comparison 2018: japan

Small pitch saws are perfect for hard wood.

Not only the thin saw blade makes a clean and narrow cut possible, it also depends on the setting. This means at which distance the teeth on the saw blade are on both sides away from each other.

A high-pitch cut can be corrected more easily than low-cut cuts. The closer the teeth of the saws are together, the deeper can be cut. Laymen should rather resort to sawing with a higher setback.

For hard wood Japanese saws are suitable with small Schränkung. If you want to work on fresh and soft wood, we recommend tools with larger pitch.

Permanently sharp: When sawing with the sensitive saw blades, always use a solid wooden base. If the saw slips off and comes into contact with metal, the slender teeth can blunt faster.

3.4. Well-known brands and manufacturers

In many Japan saw tests, Dick, Augusta, Famex and Kayser models achieved good marks. However, the renowned Stiftung Warentest has not yet dealt with the Japanese saws.

The following overview presents the most important Japanese tool manufacturers:

  • dictum
  • Edessö
  • Bahco
  • Ulmia
  • Kayser
  • Thick
  • Augusta
  • Stanley
  • Famex
  • Vigur
  • Irwin
  • Tajima
  • cherries
  • BGS
  • MPS
  • CON: P
  • Triuso
  • LUX
  • Forum

Similar sites

  • Jigsaw templates
  • The application areas of engraving, circular or reciprocating saw
  • Sharpen saw blade
  • Wooden shelter Building instructions for building yourself
  • Building instructions for a wooden Advent wreath
  • Tinker with wood
  • Make the fires of Sweden yourself
  • Wood species and woods for woodworking
  • Cordless jigsaw
  • reciprocating saw
  • chop saw
  • band saw
  • chainsaw
  • circular saw blade
  • table saw

Video Board: Hand Saw Showdown - America Vs. Japan