Glue kitchen back onto tiles

The usual tile mirror between worktop and wall units in the kitchen is not very popular anymore. Instead, kitchen backs with sometimes stunning motifs come into focus. In most kitchens, however, tiles are present, so the kitchen back wall must be glued to these.

Mount kitchen back wall without tiles

The kitchen back wall offers plenty of room for individualization of a kitchen. The conventional tile mirror looks really dull against it. In new buildings, the wall on the fitted kitchen is not necessarily tiled. Then the kitchen back wall must be fastened accordingly. Follow our link, you will receive a comprehensive assembly instructions.

Cover the tiles with the back wall

However, if you need to glue the back of the kitchen over tiles, you will receive valuable tips here. Especially with motif backs you can not cut the plate. Mention should be the range of the hood, which often goes higher than the bottom edge of the wall cabinets.

Cutting the kitchen back wall

Do not cut the back wall according to your measurements, but instead make a template from a suitably large cheap plastic plate. Here you can also mark the holes for any sockets unproblematic. Then you can check everything and fit the template perfectly. Then the later back wall sits exactly.

Balance areas without tiles

After the kitchen back wall has been cut, finishing strips must be removed. Then the tile mirror is best cleaned with alcohol. The tiles must be completely free of grease. In the area of ​​the extractor, it may be that the tiles do not reach to the lower edge but end at the wall units. About tiles you take wood strips which you stick on a distance of 15 to 20 cm. The thickness should be chosen so that you are level with the tiles.

Stick on kitchen back wall

Now, the assembly adhesive is applied according to the manufacturer's instructions in caterpillars and wavy on the tiles and the wood strips. Then the kitchen back wall is pressed onto the adhesive. The curing times specified by the adhesive manufacturer must be observed. Either edge profiles or end strips are now mounted on the edges. Alternatively, these joints can also be grouted clean.

Tips & Tricks

Ium Lets-ReBuild.com provides you with numerous guides around the kitchen. Here's how to get a guide to DIY a kitchen island. Of course, you will also find different guides and guides on other topics.

Video Board: Tile on Tile, If you have never Tiled before watch this easy how to Tile video