Laminate tool - lay laminate tool

Laminate tool - lay laminate tool: laminate

Laminate can be with simple tools embarrassed. Many of the required auxiliary equipment, such as a ruler, hammer, jigsaw, measuring and marking equipment or a beater, are already in every workshop. It is more special with distance wedges or the pull bar. But since these tools can be used over and over again, it is sufficient to borrow them or borrow them.

A laminate cutter is a good tool, which facilitates the work and produces very little dust. If a lot of laminate is to be laid, it is certainly worth buying a new one. But a jigsaw is helpful and sufficient. Especially for laminate, there are saw blades with the teeth pointing downwards. These have the advantage that laminate can be sawed from above and does not burst out of the surface. Dealing with it takes some getting used to, but provides very clean work results.

bat

Laminate tool - lay laminate tool: laminate

Homemade bats

The long sides of the laminate pieces are inserted diagonally from above and snap in with some pressure downwards. Laterally more pieces are added with one punch. The bats distributes the impact energy over a larger area and thus prevents damage to the edges. In order not to move the already laid laminate, the expansion joint must be fixed with spacer wedges or corresponding wooden strips.

Bats are made from a piece of cut hardwood and often have a small heel that adapts to the shape of the laminate-click connection. Who the appropriate Aid for woodworking owns, the baton can also produce itself. Main attention should be paid to straight edges.

spacing wedges

Laminate tool - lay laminate tool: laminate

Spacer wedges for laminate laying

Like any other fabric, laminate expands when exposed to heat and shrinks when cooled. To prevent waves from forming on the ground, Laminate is laid floating and requires on all sides an expansion joint of about 10 mm. This can be fixed on straight walls with wooden strips or adjusted in the case of unevenness with distance wedges. Spacer wedges have small heels and are placed in pairs behind each other. So different strengths can be set up and wall unevenness can be compensated.

Once the laminate has been laid, all must Moldings or spacers removed again become. Spacer wedges can therefore be used repeatedly and borrowed.

laminate cutter

Laminate tool - lay laminate tool: tool

laminate cutter

A laminate cutter works like a well-known lever or photo scissors. With a big lever you can apply enough force to cut thicker laminate. The big advantage lies in a fast and quiet operation and above all in the low dust development.

However, a laminate cutter also has disadvantages. Depending on the quality, the laminate surface tears a bit and the cut edge is not suitable for visible installation on door frames or other places. Also, cutouts are only partially possible. For contours and longer cuts should definitely have a saw ready.

miter box

Cutting shop is there in different versions and functions.

Cutting loader or saw station for jigsaws

Many manufacturers offer suitable sawing stations for their jigsaws. These are especially for laminate laying optimally suited. By adjusting perpendicular and separate angle cuts are possible. They are particularly suitable for a required repeatability, such as with diagonal installation or non-rectangular spaces.

Miter miter box

Miter cutting shop are designed for wooden strips, pipes or baseboards. Mostly they consist of one Aluminum U-profile, in which cuts are already in often required angles. These serve as a guide for a hand saw. Somewhat better miter cutters have an adjustable guide, which makes every possible angle can be realized.

Laminate tool - lay laminate tool: tool

Miter cutting drawer with poke saw

Laminate tool - lay laminate tool: wedges

sawing station

bevel

Laminate tool - lay laminate tool: laminate

Eigenbau Winkelschmiege

The Winkelschmiege is a simple but practical tool. By two movable and fixable legs, angles of room corners or the like can be removed and transferred to the laminate. Many Winkelschmiegen can also be used as a protractor. By means of a printed or imprinted scale, angles can not only be removed, but also read off. This is especially useful when working with an adjustable sawing station or a miter saw.

For a simple angle decrease, can as well with two wooden strips be helped. These are drilled in the middle of one end and connected with a screw. For inside corners, the wooden strips should be rounded at the bolted side. In this way, angles of a room corner can be removed and transferred to the laminate.

crowbar

Laminate tool - lay laminate tool: laminate

crowbar

Become lateral Laminate pieces with a hammer and bats together. When attaching the last piece, however, there is no room for the bats and the pull bar must be used.

Pull bars consist of a welded or bent piece of sheet steel. One side - usually the wider - is placed behind the laminate and a punch on the front angled piece pulls the laminate into the right position. It is important to make sure that the pull iron on the laminate leaves no scratches. For this, the lying side should be covered with felt or carpet. Even journeys can be made by a skilled handyman with appropriate tools themselves.

Similar sites

  • The cordless vacuum cleaner Renegade 36 by Dirt Devil im
  • Combine floor covering and door frame correctly
  • Laminate design: structure and decor
  • Gutters for every roof and gutter type
  • Lay tile on tile
  • Stress classes for laminate
  • Laying large tiles - this is how it works
  • Lay laminate - Floating laying with glueing
  • Laying Click Laminate - Instructions for Do-it-yourselfers
  • Repair laminate - repair scratches in the laminate
  • Laminate cleaning and care
  • Lay and glue OSB boards
  • Laying massive parquet floating
  • laminate cutter

Video Board: Amazing DIY Laminate Flooring Tools