Turning bench comparison 2018


Purchase advice on the lathe comparison or test 2018

  • In wood turning lathes, pieces of wood are clamped, which spin quickly. With a lathe chisel you can carve depressions and decorations while turning.
  • Turning lathes are also called lathes, wood lathes or table lathes. In contrast, so-called "lathes" are intended only for the machining of metal.
  • Woodturners vary in size: some are large enough for furniture parts and some are so small that they are ideal for model making.

Turning bench comparison 2018: 2018

1. Expensive toy or a must for home improvement: the lathe

Turning bench comparison 2018: lathe

Filigree shapes such as eggcups or bowls can be cut out of wood blocks using wood turning lathes.

In a lathe, you can not only use beautiful wooden legs to conjure up beautiful curved table legs, but also decorate short wooden objects. filigree Lines cut easily into small wooden bowls and vases.

Width and depth of the cuts are so exact with lathes, that the results compete with those of the pros, So if you still have room in your workshop and regularly enjoy the kinship with home-made artwork, you should definitely choose a model from our 2018 Wood Turning Comparison.

2. Which type of lathe are you?

There are no different types or types among the lathe banks. However, the machines differ in size or in the size of the workpiece holder. Before you realize in your own lathe test that the machine is too small for your purposes, here are some examples of application areas:

Turning bench comparison 2018: comparison

Large lathe banks create whole table legs (here in the picture the Record Power 305).

2.1. The Carpenter

If you want to make legs for tables and chairs in shape, you need the largest possible lathe. A workpiece holder from 1,000 millimeters is big enough for furniture parts, The bigger the picture, the more professional you can use it.

For a table leg, for example, you need at least 500 to 700 millimeters of workpiece holder.

Turning bench comparison 2018: turning

The pictured wood turning lathe DB 450 by Holzstar is a representative of the medium-sized models.

2.2. The artist

Who does not want to try as a joiner and would rather work on medium-sized workpieces, is well advised with a tool holder between 300 to 1,000 millimeters. Wooden sculptures, vases or Wooden bowls can be comfortably stored in a wooden lathe from 300 millimeters drechseln.

2.2. The model maker

If you do not want to turn fruit bowls or bookends, but small pieces of furniture for doll houses, then you need a mini lathe. Such Model lathes should have a workpiece pick-up under 300 millimeters.

Turning bench comparison 2018: 2018

Mini lathes like the Proxxon Mirco DE 250 shown are ideal for filigree woodwork.

3. The way to the best lathe

Once you have decided on a field of application, you can start looking for a Turning Bank test winner or comparison winner. When you need a device with a particularly high speed or a copying device, we tell you in the following purchase advice:

3.1. Turning diameter and workpiece length

Turning bench comparison 2018: lathe

The turning diameter indicates the maximum thickness and the workpiece length the maximum length of the workpiece (here the example of the Holzmann lathe D 460fXL).

When you need which workpiece length has already been explained in chapter 2. If you are unsure: a machine of about 300 to 450 millimeters is not wrong for a first lathe bench test.

The turning diameter of a lathe tells you how thick the maximum workpiece may be. Choose a particularly large turning diameter, then you are free later in the choice of your workpieces. From 300 millimeters you have a large diameter.

3.2. number of revolutions

Turning bench comparison 2018: lathe

Small engines are weaker, but turn faster.

The speed at which the workpiece rotates in the lathe also determines which shapes you cut into a table leg, for example, If you want to pull a particularly tight spiral pattern over the entire table leg, then the workbench must turn very fast: e.g. with 5,000 revolutions per minute (rpm).

On the other hand, if you want the lines of the spirals to be far apart then you need a slow speed: e.g. 800 rpm. To vary the patterns comfortably, It is helpful if you have a particularly large number of stages to regulate the speeds.

About the power of an engine manufacturers give no reliable information out, however, high wattage is a helpful indication of a powerful machine. Medium sized wood turning laths should take at least 300 watts.

Small but fast: The engine of small lathe turns usually faster than that of large, because "mini-lathes" have smaller Radi. Although these small table lathes have less power than a seasoned carpenter lathebut you do not need them for small workpieces either.

3.3. Scope and installation

Turning bench comparison 2018: turning

Some models do not have their own frame and need to be mounted on a table.

Many woodturning lathes come without a rack and must be mounted on a workbench. However, turntables for mounting are handy if you do not have much space and want to stow her on the closet after work is done.

However, you should pay attention to the circumference of the turntables to be mounted, because a large machine is not safe on a too small workbench, Measure your workbench before buying a lathe. More information about workbenches we have for you:

  • To the work bench comparison

3.4. copying device

Turning bench comparison 2018: bench

A copier scans a document and the lathe automatically slides back and forth.

The freestyle of the Drechsler is to produce multiple identical workpieces. After all, you do not want every leg of a chair to look different.

traditional Professionals transfer measurements by hand with a vernier caliperBut the layman can ease the work by choosing a lathe with copier.

This is a small holder, in which the rotary knife (also turning tool) is clamped and pre-set to different depths precisely. Thus, almost automatically forms of an existing chair leg can be transferred to a still untreated workpiece.

Turning bench comparison 2018: turning

Copy machine: Top left, the still raw workpiece, right below the template.

Anyone who frequently restores old furniture will find a faithful friend in a copier. The Stiftung Warentest also recommends the book Repairs at home to restore old furniture.

3.5. Suitable spare parts

Speaking of turning knives: While turning heads may be handy for a turntable novice, you should pay more attention to that for your model Matching exchangers available in stores are.

The change chuck (also called turning chuck or jaw chuck) is the holder, in which the workpiece is clamped or put on it. These do not always come from the same brand, Turning lathe accessories are more worthwhile to buy in hindsight.

Sufficient food in the trade: The jaw chuck in the lathe is a wearing part that decides the quality of your turning work, because it holds the workpiece. If the wood is not secure, the cuts will not be clean either.

4. The turning tool

The most important accessory is the lathe tool (or rotary knife), with it the turner lifts the chip from the workpiece. Since there are many types of turning tools, we facilitate the search with a small table:

Turning tool typegood for:
wide turning tool

Turning bench comparison 2018: 2018

  • normal, straight wells
  • wide recess
  • according to DIN 4976
Nose cutting tool

Turning bench comparison 2018: comparison

  • normal, straight well
  • narrow depression
  • according to DIN 4981
sharp turning tool

Turning bench comparison 2018: comparison

  • needle-deep recess (e.g., grooves)
  • extensive removal (when moved from left to right)
  • according to DIN 4975
offset side turning chisel

Turning bench comparison 2018: turning

  • right angles (90° angle)
  • according to DIN 4980
curved turning tool

Turning bench comparison 2018: lathe

  • oblique angle (45° angle)
  • according to DIN 4972
offset corner lathe tool

Turning bench comparison 2018: turning

  • right angles (90° angle)
  • needle-like indentations (e.g., grooves)
  • according to DIN 4978

5. Frequently asked questions about the lathe

Small lathe ABC

On the lathepalmrest The turner lays his hand with the rotary knife. So he can certainly lead the tool along the wood.

The tailstock (Or called front driver of manufacturers) holds the workpiece together with the headstock. The tailstock is moved away from the headstock to accommodate different workpiece sizes.

The headstock is driven by the engine by V-belt. The workpiece is clamped or stuck in the headstock as it causes the wood to rotate.

5.1. What is a lathe?

A lathe is a Power tool to turn wood pieces at high speedwhile picking up chip with a hand tool (the turning tool or rotary knife). This allows even channels to cut all around into the piece of wood or just ornaments.

Lathe is not a lathe

Do not confuse the lathe, which is also called a lathe, with a lathe (experts say "turning" also means "turning"). Although the term "woodturning machine" is also used in online trading and various woodturning tests, it is not established in specialist circles.

Lathes today are machines for working metal, In industrial circles, they are mostly computer-controlled and are called CNC lathes (CNC stands for "Computerized Numerical Control").

5.2. Which lathe is good?

A simple-sounding question that can not be answered with a sentence, because Whether a lathe is suitable for you depends on the size of the workpieces, Lathes from 1,000 millimeters are suitable for carpentry, 300 to 1,000 millimeters for crafts and up to 300 millimeters for model making. More details can be found in chapter 2 of our woodturning bench comparison.

5.3. Is there a woodturning bowl?

Turning bench comparison 2018: comparison

Almost every lathe is good for bowls as well (like the pictured Record Power).

In principle, you can Produce wooden bowls with each lathe, It's just a matter of size. For an average fruit bowl lathes are suitable, which have a workpiece holder from 300 to 1,000 millimeters and particularly wide turning diameters (for example, 300 millimeters).

5.4. How much does a wood turning bank cost?

The prices of wood turning laths are based less on the size of their workpiece holder. The Quality of the machines drives the costs in this tool area in the height.

Manufacturers like Berlan or Einhell cheap turntables in the range of 100 to 200 euros ago. Güde, Proxxon, Scheppach and Record Power rely on more powerful machines and sometimes demand 400 to 600 euros.

Holzmann also has industrial models that cost more than 1,000 euros. The manufacturer Vicmarc has hardly any models below this limit. However, most bank suppliers remain under the 1,000 euro category.

But before you build a lathe itself, it may be worth taking a look at the cheap models: Effort and material costs for DIY are not in proportion to the still good services of a cheap lathe.

In a lathe test, the homemade construction can hardly keep up. Online can be found in the usual online stores such as Ebay or Amazon occasionally used but still good turntables. Be sure to pay attention to the condition of the headstock here.

Similar sites

  • Home improvement app for the iPhone and Android smartphone - The app with instructions for home improvement.
  • Make games, toys and decoration out of paper
  • Wood protection and wood preservatives- Questions 6-10
  • CNC milling machine for the home improvement
  • Color epoxy
  • Seal bottom plate
  • Workbench
  • safe
  • Gartenleuchte
  • riveting tool
  • tongs
  • masonry drill


Video Board: 9 Best Bench Grinders 2018 Reviews