Use leveling compound or leveling compound on wood correctly


Uneven floors often present the craftsman with major problems. This is especially true when new floor coverings are to be laid on wood and the old wooden floors are anything but flat. Here balancing mass can help eliminate the problems.

Use the leveling compound to effectively smooth out uneven floors

Uneven soils can have different causes. It may be due to improperly executed work, when a wooden floor is later uneven or anything but flat from the beginning. If you want to lay new floor coverings, it is first necessary to compensate for the bumps in order to obtain a correspondingly good result later. After all, no one is helped, if later bumps cause minor pitfalls or the result later looks anything but neat.

Leveling compound compensates for unevenness and smoothes floors

Non-level floor surfaces can be very well compensated with self-leveling ground leveling compounds. This method is often used in attics and basements for good results. Later, new coverings such as tiles can be laid on the leveled floors. With the right leveling compound level differences of up to 30 millimeters can be easily compensated. When choosing the appropriate balancing weight, you should pay particular attention to the following:

  • The strength of the unevenness of the floor covering and the resulting layer thickness of the ground leveling compound plays an essential role.
  • If necessary you also have to apply special repair mortar or screed.
  • Make sure that the leveling compound can be applied well to wood.

What to look for when leveling the floor

Using the appropriate leveling compound or compound to level uneven floors, you can achieve great results in a relatively easy way. However, keep in mind that building materials expand and contract. As a result, the rooms and buildings are in constant motion, even if they are only minimal changes. Especially wooden floors warp sometimes very strong. This can lead very quickly to cracks in the balancing mass, which must be avoided. It is therefore very important to lay appropriate insulating strips on the edges so that the floor can work. In this way you save unnecessary work, which can occur long after the processing of the floor coverings.

Wooden floors as a basis for new floor coverings

If a wooden floor is no longer attractive or has very large bumps, it can nevertheless serve as the basis for a new floor covering. With the right pretreatment, a wood flooring is also ideal for laying new panels, tiles, a carpet or other type of flooring. Using the right material will give you excellent results. Above all, select the suitable leveling compound. The corresponding information can be found on the packaging of the manufacturer.

Artikelbild: RUl8let / Shutterstock

Use leveling compound or leveling compound on wood correctly

FAQ - 💬

❓ Can you put levelling compound on wood?

👉 Wood floors need to be primed before covering them with self leveler. The floor will be covered with water-saturated leveler, which will cause the wood to swell. It will shrink back down when it dries, which could cause cracks in the underlayment and tiles above. The primer prevents the wood from absorbing water.

❓ Does floor leveler stick to wood?

👉 Self-Leveling Underlayment is an easy-to-use, cement-based underlayment that self-levels. Just mix it with water, pour and spread. The underlayment is excellent for smoothing and flattening interior surfaces before installing floor coverings. Use over concrete, wood, tile, terrazzo and cut back adhesive.

❓ How do you level a wood with self-leveling compound?

👉 Using a Self-Leveling Compound on a Wooden Subfloor

  1. Clean the Wood Floor Thoroughly. ...
  2. Seal all Cracks and Seams. ...
  3. Install a Sill Sealer to Wall Bases. ...
  4. Block Areas Where You Don't Want the Compound to Flow. ...
  5. Seal The Plywood Well. ...
  6. Mark Low Areas For Best Results. ...
  7. Buy the Right Self-leveling Compound.

❓ When should I use leveling compound?

👉 Floor Leveling Compound & Its Uses The most common use is too create a consistent, level subfloor for wood, tile, vinyl and other floorings. Bring a low area of a concrete floor up to the level of the surrounding flooring. Cover tubing for in-floor radiant heat systems.

❓ Can I use self-leveling compound on plywood?

👉 You can also use self-leveling concrete on plywood as an underlayment for other types of floor coverings, such as carpet or tile. Whether you're a homeowner, contractor, or property manager, self-leveling concrete is a cost-effective, durable option for replacing floors that are cracked, uneven, or worn.

❓ How do you level a wooden floor?

👉 0:148:55How to level a wooden floor

❓ Can you put self-leveling compound on plywood?

👉 You can also use self-leveling concrete on plywood as an underlayment for other types of floor coverings, such as carpet or tile. Whether you're a homeowner, contractor, or property manager, self-leveling concrete is a cost-effective, durable option for replacing floors that are cracked, uneven, or worn.

❓ How thick can you put floor leveler?

👉 QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

❓ How do you use floor leveler on wood?

👉 2:549:37How to use floor leveler on wood subfloor to fill low spots ...

❓ What happens if you add too much water to self-leveling compound?

👉 Proper water demand: Mix your self-leveling underlayment within the water range specified on the bag. Overwatering will lower the strength of the underlayment and may cause cracking and disbonding. Additionally, a white film may form on the surface of the cured underlayment if the product is overwatered.

❓ How thick should self-leveling compound be?

👉 The minimum thickness advised for many levelling compounds is only 2 or 3 millimetres (some require a minimum of 5mm). And whilst even a millimetre less than the prescribed minimum might not seem that significant, it can cause problems.


Video Board: How to install self leveling over a wood subfloor