Tinker cardboard lantern


Bastelanleitungen for Martinslaternen made of cardboard and cardboard

Tinker cardboard lantern: Tinker

From an old carton can be made for St, Martin a great and simple lantern. When the carton is stable, the lantern will withstand even stronger winds. Besides, she is one beautiful crafting idea for children in kindergarten and elementary school.

Whether owls, bats, caterpillars, frogs, teddy bears or stars: In the design you can let your creativity run wild and with Craft paper, sturdy craft paper or corrugated individual lanterns for the Martin suit shape.

Because of the fire hazard of paper lanterns, younger children should only use them with electric light. Pupils and adults, however, can use a candle. But those who are looking for a model, not only that Wind but also withstand the rainbuild one Wooden lantern.

Crafting instructions for a penguin lantern

Tinker cardboard lantern: lantern

There are many different types of saint martins lanternsthat you can make and design yourself.

Below is a penguin lantern crafting tutorial that will guide you step by step how to use the In a flash, a beautiful lantern to conjure for the St. Martin's move.

material list

  • Black and orange construction paper
  • White tracing paper
  • pencil
  • Black felt-tip pen
  • Scissors and cutter knives
  • glue stick

Step 1

First, draw a penguin with a pencil on the black construction paper.

To craft identical penguin front and back sides that fit together, cut the first Sketch of the penguin and transfer the motif again on black construction paper. Now cut out the back as well.

Be sure to use the Cutter Knife in the next step to make a margin of width cut out about 2cm Therefore, you must mark and mark a thin line as a guideline in advance with a pencil. So it is easier for you to separate the inner surfaces, the width of the edge to comply.

Tinker cardboard lantern: lantern

Penguin record

Tinker cardboard lantern: lantern

Record the front and back of the penguin

2nd step

Now carefully separate the Inner surfaces of the penguin with a cutter knife out and leave a margin about 2cm wide.

Tinker cardboard lantern: paper

Cut out the inner surfaces

3rd step

Draw the Inner surfaces of the penguin on white tracing paper and give the face an expression.

Then record the beaks orange clay or translucent paperCut these out and glue them in the right place on the white tracing paper.

Tip: To decorate the penguin, you can Stars or other symbols on the body to draw.

Tinker cardboard lantern: construction

Paint faces

4th step

Now glue the two inner surfaces of tracing paper from behind on the black construction paper.

Tinker cardboard lantern: lantern

Stick the inner surfaces to the black construction paper

5th step

Below you'll make a separation, later glued between both parts of the penguin becomes.

This separation consists of three contiguous parts: two side pieces and a middle piece. The width of the Center piece, which is about 20cm should, determines the depth of separation.

To do this, draw a strip of construction paper. Make sure that the two side parts are the same size. Make that up Middle piece slightly wider than the side pieces.

Tinker cardboard lantern: cardboard

Tinkering with separation

6th step

Finally, glue the separation between the two parts of the penguin and wait about three minutes for the glue to dry and is firm. Done is your penguin lantern!

Now attach your lantern to one electric lantern bar or put a tealight inside the lantern.

Note: When using paper lanterns and candles there is a risk of fire! Never leave the lanterns unattended at any time. We recommend that you use electric tealights here.

Tinker cardboard lantern: Tinker

Done is your penguin lantern

Crafting instructions for a raven lantern

Tinker cardboard lantern: lantern

Raven Lantern

Every child wants a brightly-beautiful lantern for the St. Martin's procession and later to move around the houses and to collect sweets.

Below is one Step by step crafting instructions for a lantern in the shape of a raven, which shines magically through bright, yellow tracing paper and a light inside.

material list

  • Black, white and yellow construction paper
  • Yellow tracing paper
  • glue stick
  • Scissors and cutter knives
  • Black felt-tip pen
  • pencil

Step 1

Draw the Body of a raven with feathers on black construction paper and cut it out.

Around identical front and back sides to tinker, cut out the first sketch and retransfer this motif to black construction paper. Now cut out the back as well.

Be sure to use the cutter knife in the next step Cut off the edge with a width of about 2cm Therefore, you have to mark and mark a guideline in advance.

Since the two heads of the raven must not be missing, draw the Head with two feathers on the construction paper and cut him out.

Here too you need front and backwhy you cut out the first sketch and transfer it again to black construction paper.

Tinker cardboard lantern: cardboard

Items of the Raven Lantern

2nd step

The inside surfaces of the raven are cut out with a cutter knife. Subsequently Draw two circles that are as big as the inside surfaces of the raven are on yellow tracing paper and cut them out.

You can paint the inside surfaces with different contours, so that your raven gets an individual touch. Then stick it yellow tracing paper from behind on the body of the animal.

Tinker cardboard lantern: lantern

Contoured inner surfaces

3rd step

In the next step, tinker yellow construction paper a beak and out of white construction paper the eyes for the raven. Now glue the parts of the face upside down and attach it to the body.

Tinker cardboard lantern: construction

Tinkering with separation

4th step

Finally, you make a separation, which is later glued between the two parts of the body. The separation consists of three contiguous parts, It includes two side pieces and a center piece.

The width of the center piece determines the depth of separation for which you are cutting a strip of construction paper about the dimensions 20x10cm should have. Make sure that the two side parts are the same size and tinker the center piece slightly wider than the side pieces.

Tinker cardboard lantern: cardboard

Detail view of the raven lantern

5th step

Stick the last step Separation with the two parts the body together and your St. Martins Lantern is ready! Now attach your lantern to one electric lantern bar or put a tealight inside the lantern.

Note: when using paper lanterns and candles there is a risk of fire! Never leave the lanterns unattended at any time. We recommend that you use electric tealights here.

Have fun crafting!

Crafting instructions for a simple cardboard lantern

material list

  • A box in lantern size
  • scissors
  • adhesive film
  • Colorful transparent paper
  • colour
  • brush
  • craft glue

1st step: The choice of the box

It can basically any kind of cardboard used for crafting become. But the ideal shape is similar to that of a lantern.

In the first step, the upper closure tabs are removed and the lower bottom is sealed with adhesive film. Then you paint the Cardboard at will in different colors and let it dry.

Tinker cardboard lantern: construction

Cut off the tabs and paint the cardboard

Step 2: Cut the window into the box

Different sized holes are cut on all four sides. We are on our Sketch for square windows decided. In addition, round or oval holes can be chosen.

Tinker cardboard lantern: construction

Cut the window into the box

Step 3: Cover the lantern with colored transparent paper

Now the windows are on the Inside with transparent paper in different colors pasted. The more varied the colors, the more beautiful the lantern will shine later.

Tinker cardboard lantern: construction

Glue window

Step 4: Attach the lantern to the rod

Finally, the lantern stick is missing. For that will be at the Opening of the lantern struck two opposite holes and attached the suspension of the rod.

Now attach the candlestick in the middle of the floor and the candle. Done is the simple cardboard lantern.

Tinker cardboard lantern: cardboard

Fix the lantern

Video tutorial: Making colorful paper-based lanterns

Various cylindrical lanterns can out Craft paper, corrugated cardboard or thick craft cardboard designed become.

This video explains the basic form of a martini lantern with moon and stars, which can also be tinkered with other motifs.

Video: Make owl lantern

A cute owl who sees the kids with big, round eyesMake with this video instruction from corrugated or construction paper.

Since the level of difficulty is a bit higher than with the simple lanterns, this guide is suitable for elementary school children.

Video tutorial for a frog lantern made of construction paper

Provide more variety on the St. Martin train funny motifs like this frog lanternthat schoolchildren and parents can make from transparent and construction paper.

Video: Make a cardboard teddy bear lantern

a cute teddy bear in front of a bright starry sky - The crafts for this elaborate St. Martin's lantern take more time and are suitable for older elementary school children and parents

Video: Martinslaterne tinker with caterpillar

Things are really colorful on St. Martin's train with these caterpillar lanternse too. The following video explains how it is made from corrugated, transparent and construction paper.

Similar sites

  • Tinker lampshade yourself
  • Tinker folding cards
  • Building pallet chairs - construction manual for garden armchairs made of pallets
  • Tinker puppetry
  • Crafting instructions for lanterns from paper plates
  • Tinker snowflake window decorations
  • Make Easter baskets
  • Tinker lantern from a PET bottle
  • Tinker lantern from balloon
  • Lanterns make tinker to Sankt Martin
  • Tinker autumn wreath
  • Make Halloween lantern
  • Tinker with cardboard
  • Make Christmas star
  • Crafting lucky pigs


Video Board: DIY Fairy Lantern / fairy glow jars