Renovation fleece: properties and workmanship

Renovation fleece: properties and workmanship: fleece

Some surfaces can not be papered as usual - because they are damaged, have incompatible coatings or consist of a non-absorbent material. The solution is here Renoviervlies, which creates a uniform, level, sufficiently absorbent surface. A wall that has been renovated with Renoviervlies, you can then with whatsoever Wall paint, decorative plaster, one spatula cream or a decorative wallpaper provided.

The second group are intact, uniform, but non-absorbent materials. Again, the fleece ensures that they can be covered with the common types of wallpaper - provided that the existing surface is firmly connected to the wall. Here is a selection:

  • Plastic coated panels
  • Dimensionally stable vinyl surfaces
  • PVC foam wall coverings
  • Tiled surfaces

What is renovation fleece?

Renovation fleece: properties and workmanship: properties

On the left side of the picture you can see the uneven wall surface - here an old one Fiberglass wallpaper. In the middle the adhesive bed, on the right the surface ready for papering with renovation fleece.

Renoviervlies is a sub wallpaper that made Cellulose and textile fibers will be produced. Unlike non-woven wallpapers, the fleece is smooth, white and unprinted. It is crack-bridging, vapor-permeable and usually flame retardant. It is obtained as a roll product.

Since it is dimensionally stable like other nonwovens, so does not swell when gluing and does not shrink when drying, you can apply the Renoviervlies in the wall adhesive method in which the paste is rolled or painted directly on the wall, or it can be with the Pasting machine pasting and applying immediately to the wall without any time of rest.

Material and tools

  • fleece
  • Lambskin roll or toothed spatula
  • Wallpapering scraper or plastic smoothing
  • Possibly. trowel
  • Suitable adhesive

The application tool and the required adhesive or paste depend on the intended application. Here is a summary table:

Area of ​​application Adhesive Bonding technology Crack bridging and wall design of absorbent, smooth substrates Adhesive reinforced, tempered glue for fleece, glass fabric and heavy woodchip Wall adhesive technique Rolling application site remediation on z. Adhesive for styrofoam, cork and non-woven underlay materials Wall adhesive technique Smoothing Smooth, non-absorbent substrates Dispersion adhesive for Styrofoam, cork and non-woven underlay materials or pasty border adhesive Wall adhesive technique Trowel

Process renovation fleece

First, clean the surface of loose dirt or dust and degrease if necessary. Make sure that the surface is firm, dry and stable. Loose deposits are removed, water-soluble old coatings washed off. For clearly structured and uneven surfaces, you should use the smoothing trowel to apply a layer of dispersion adhesive over the entire surface and smoothly and allow to dry completely.

If the tempered paste is used, it is applied with the roller on the surface to be glued. A ready-to-use dispersion adhesive is applied with the toothed spatula. For that are the Triangle teeth B1 and B2 or the Rectangular serration C1.

Renovation fleece: properties and workmanship: fleece

In the wall adhesion process, the paste or dispersion adhesive used is applied directly to the wall. A lambskin roller is suitable for this purpose.

Renovation fleece: properties and workmanship: properties

Alternatively, it is above all thicker dispersion adhesives that can also be processed with the notched trowel - helpful for greater unevenness.

Treat each area that you can cover within the open time specified by the adhesive manufacturer. In the beginning, you can apply glue or glue for just over one lane, until you have a sense of how much space you can manage in which time. In the wet glue or glue you insert the Renoviervlies.

Renovation fleece: properties and workmanship: fleece

The fleece is inserted directly from the roll into the adhesive bed and then cut to length.

Renovation fleece: properties and workmanship: adhesive

The nonwoven webs should not overlap, but must be glued on butt.

Renovation fleece: properties and workmanship: fleece

The Renoviervlies you press only gently so that it is smooth and full surface in the adhesive bed.

Gently press the fleece into the adhesive bed with spatula, smoother or roller. Do not apply too much pressure, it is just that the fleece is smooth, wrinkle-free and bubble-free and has contact everywhere with the evenly distributed plan adhesive. The next track is laid in the same way on the previous track.

If you use this method to cover the entire area with renovation fleece, let it dry for as long as possible, as stated by the adhesive manufacturer, Afterwards you can change the walls completely according to desire and taste continue to shape.

Similar sites

  • Non-woven wallpaper - The modern wallpaper at a glance with tips for wallpapering
  • Wallpapering techniques: Wallpaper paste, Rolltapezieren and Wandklebeverfahren
  • Lay tile on tile
  • Flooring screed and dry screed: properties and processing
  • Clay Clay Processing: Instructions and properties of clay plaster and clay color
  • Wallpaper types: wallpapers, borders and wall tattoos
  • Plaster interior plaster: plaster work on interior walls
  • Build lamp and lampshade yourself
  • Wood species and woods for woodworking
  • Primer - paint the wall with Tiefengrund or Nikotinsperre
  • Processing of cotton plaster and wall tattoos
  • For children and adults: make figures from papier-mâché
  • Process cement mortar
  • Filaments for 3D printing
  • Cushion the seat itself

Video Board: A1 Surrey Roofing Ltd