Log splitter comparison 2018


Purchase advice for wood splitter comparison or test 2018

  • A wood splitter makes work easier if you do not want to or can not cut your firewood yourself by ax or saw.
  • The hydraulic drive allows standing and horizontal log splitters to generate several tons of pressure to split the wood. Standing models are much stronger, but also more expensive.
  • With a splitting wedge, two pieces can be produced in one operation, or even four logs with a splitting cross. Time and energy savings are arguments for wood splitters.

Log splitter comparison 2018: splitter


Of course, it is convenient if you can warm your home with fuel oil or gas and get the delivery of fuel conveniently transported to your home. But if you have a fireplace on traditional style and want to fire with wood, usually a little more manual work is announced. And many also like to grab the ax or hatchet to beat larger pieces of wood into handy logs.

Who for the sake of comforts or the health can not or does not want, has the opportunity to one wood splitter recourse. In our wood splitter test 2018 we present you the different categories and important criteria, which you should consider in your choice after your personal log splitter test winner.

1. What is a log splitter?

Fire for millennia

Wood has been a proven tool for 400,000 years to keep fires alive. In fact, it is even the oldest fuelwhich is used by humans for this purpose. Compared to oil or coal, its calorific value is lower, but it is easier to harvest and cheaper than the other raw materials, which must first be elaborately promoted.

A wood splitter buy primarily people who Produce firewood want. For this purpose, a usually round tree piece is clamped in the holder and then by means of metal Splitting wedge or splitting cross divided into smaller pieces. The whole works via a hydraulic drive, which is supplied by an electric motor. For models attached to a tractor as a structure, the tractor acts as the driving force for the log splitter. There are also types of Holzspaltern that do without motor skills, but are operated by a threaded rod. This also means a significantly reduced generation of force and pressure. This is why we only discuss hydraulic types in our wood splitter comparison.

By default, a piece of trees in four parts split, because the logs are so handy and the burning time of the fireplace can be determined more flexible. With a riving knife so two passes are necessary to obtain the four parts. If you also want to save time here, a log splitter that has a splitting cross instead of a splitting wedge is advantageous. With the four cutting surfaces can be a piece of wood in one step quarters. Often these are available as an accessory in the trade.

Before we introduce you to the different types and purchase criteria in our log splitter test, we list them in our Advantages and disadvantagesBox still the most common arguments for and against wood splitters.

  • time and energy saving
  • depending on performance, suitable for different types of wood
  • safer than ax and saw
  • standing splitters significantly more expensive than horizontal models
  • additional costs due to electricity

2. Standing or lying - These types of wood splitters are available

In addition to the previously mentioned non-hydraulic representatives of firewood splitter, which we do not discuss in more detail in our purchase advice, the devices with electric motor can be primarily in two genera organize.

2.1. Standing log splitter

Log splitter comparison 2018: 2018

A standing wood splitter is more efficient than a recumbent, but also more expensive.

This variant also listens to the names vertical splitters and horizontal splitters. It distinguishes that such models have one very high pressure can exercise on the piece of wood to be divided and even with pieces that are over one meter long. For this purpose, a riving knife is used, which is driven from top to bottom through the wood, which is placed on a short wooden table.

Practical equipment parts are lateral support arms that keep the wooden halves from falling to the ground. Especially with heavier pieces this reduces the risk of injury to you and your feet. The purchase price is here as well significantly higher as a lying specimen, because you have a much greater capacity.

If a wood splitter is standing, it is also important that you stand on one safe position on level ground, because the very heavy equipment can tip over in the worst case.

2.2. Lying log splitter

Log splitter comparison 2018: splitter

A horizontal log splitter picks up the wood horizontally.

Rather than entry-level model to look at is the variant, which is also referred to as a horizontal splitter or horizontal divider. In contrast to the standing wood splitter, both the purchase price and the own weight are lower. This should be particularly attractive for you if you want to produce only small quantities of firewood for yourself.

A disruptive factor may be that the maximum length of the fissile pieces of wood limited to about 52 cm is. This means that you must first bring pieces of the tree trunk, which exceed this length, approximately with a chainsaw to the appropriate size, in order to be able to clamp them in such a device.

In terms of power development, a log splitter is also lying not so powerful like his standing counterpart. The nip pressure of the pressure plate, which moves the wood against a splitting blade, is between four and seven tons on most models, while particularly powerful stand splitters can reach regions of 12 tons and more.

No carelessness: Just because you do not handle the ax and chain saw to break the wood into handy portions, you should not be reckless with your own safety. A wood splitter can tip over or wooden parts can fall to the ground in an uncontrolled manner. To be more robust here, we recommend safety shoes, Depending on how dry the wood is and what consistency it has, splitters can also fly through the air and hit you. A safety goggles should be the least to face protection.

3. Purchase criteria for wood splitters: You must pay attention to this

Which of you is the best wood splitter, may also depend on the criteria, which we explain in more detail in our clear table below.

buying criteriadescription
splitting pressureThe nip pressure is decisive in the question of which types of wood the device can split. There are depending on the tree different degrees of hardnessthat require different degrees of nip pressure. While spruce, pine or fir are considered soft woods, birch, beech or oak are sometimes very hard. Which wood splitter you should buy depends on which wood you usually use for your purposes.

A device with a nip pressure of four tons copes well with soft variants, for tougher varieties seven tons are the better choice. If you opt for a standing wood splitter that is inherently more efficient than a recumbent, you should join every tree species to be able to cope.

SpaltgutlängeAs already discussed in the juxtaposition of standing and lying wood splitter, lying specimens are usually designed only for a maximum length of 52 cm, as they do not have enough capacity for larger pieces. Standing variants also easily create pieces of wood whose length exceeds one meter, But because of the initial size of the wood, you do not necessarily have to opt for a stand splitter.

If you can influence how big the pieces are or are willing to trim them to a smaller size if necessary, then a horizontal splitter can also do his work. But that is with extra effort For you, and especially in the cold months of the year, it can cost you time that you would rather spend in the warm house.

Spaltgut-
diameter
Length and hardness are not the only criteria to consider when choosing the right wood splitter. The Diameter of the piece of wood is another variable that may differ depending on the model. For many models, the maximum diameter of the trees to be taken is reached at 25 cm.

Do you want to disassemble more extensive trees, this is not without overtime, such as central sawing, But this also causes the trunk to lose its round shape, which leads to uneven pieces when you use a splitting cross instead of a splitting wedge.

Loud matter: A wood splitter is not exactly a tramp when performing his work. A volume of 90 decibels (corresponds to the noise level of a busy highway) and more is achieved when splitting the wood quickly, the noise here is not from the wood, but from the engine. It is therefore advisable that you wear earmuffs when operating the log splitter.

As in all product categories, several manufacturers and brands vie for the favor of the buyers. This is no different in the industry for woodworking accessories. We introduce the established manufacturers:

  • Scheppach
  • AL-KO
  • steel man
  • Eberth
  • güde
  • Atika
  • DEMA
  • Forest Master
  • AGT
  • Flint
  • Fiskars
  • Lazer
  • Lumag
  • Rotenbach
  • Bulkston

5. Questions and answers about wood splitters

5.1. What does Stiftung Warentest say about the log splitter?

Log splitter comparison 2018: comparison

Make sure the wood splitter is secure.

In its issue 12/2011 Stiftung Warentest has tested ten wood splitters. In addition to three standing were seven lying models. Exceptionally well, the tested horizontal splitters did not get away from the experts, only once was the verdict "good" awarded. Two were even punished as "deficient" because they were one dangerously placed power cable on which the wooden halves can fall and damage it.

Another splitter was curiously not equipped with a splash guard for the plug, which for Electric shocks in contact with water can provide. The more expensive and efficient vertical splitters were all rated "good", handling and safety satisfied the inspectors.

5.2. How can I split especially hard wood?

On the one hand, of course, it's important that your wood splitter is able to generate enough nip pressure and power to drill through high-grade woods. In addition, to get through so-called problem wood, it can help, the riving knife or the splitting cross rub with fatto improve the lubricity.

5.3. How do I care for a wood splitter?

To ensure consistent functionality and support the longevity of your wood splitter, you should make sure that the Cylinder lubricated and is clean. Sliding beam and splitting column should be greased and screwed at regular intervals on their strength being checked. A complete one oil change is usually required every 50 hours of operation.

5.4. How safe are wood splitters?

If you are on one even surface pay attention, is already an important prerequisite for accident-free wood fills fulfilled. A modern wood splitter can be operated by one person alone, so helpers should keep a generous safety distance of about five meters, so as not to be hit by lapping wooden fissures. You should also be careful that you no seasoned wood Load into the splitter, as it is so dry that it can explode explosively and the splintering flight can cause uncontrollable projectiles. Self-made devices are often significantly less secure because less tested. For example, this video shows very clearly how adventurous your own creations can look like:

Similar sites

  • Jigsaw templates
  • Tinker with wood
  • Cordless Screwdriver
  • wine refrigerator
  • WC seat
  • doghouse
  • Bodenwischer
  • lawn fertilizer
  • smoke detector
  • mowing machine
  • air cleaner
  • game camera
  • Bicycle helmet
  • Electric scooter
  • tENT


Video Board: Top 5 Best Wood Log Splitter You Need To See 2019