Clean and care for marble gently

Marble is one of the most beautiful natural stones used in interior design as well as in landscaping and garden design. Correspondingly often, marble can now be found in numerous residential buildings. However, marbles are in need of care and, above all, extremely sensitive to numerous substances. If you want to clean marble, you must be careful. Here you will find many useful information to clean your marble efficiently, but also gently and sustainably.

The sensitivity of marble is evident even from the extraction

The special sensitivity of the crystalline limestone can already be guessed from the dismantling and production methods of tiles and slabs. Since the 1960s, marble is no longer blown up, as too much of the precious stone is destroyed. The processing companies such as stonemasons grind marble for days in elaborate procedures. This is how the stone gets its fascinating shine.

Maintain and maintain marble from the first hour

If you then use the marble, the cleaning and care of the natural stone begins immediately after laying. First of all, make sure that the newly installed marble can not be walked on at construction sites. Sand and coarse dirt are normal on construction sites. If all active craftsmen and maybe you were walking with your shoes over the marble, he would be damaged in an instant. Dull, scratched marble would be the result.

The cleaning of marble

Therefore, cover marble surfaces that need to be entered, preferably with an air-permeable carpet. Never use boards or construction boards. These would also grind over the marble and damage it permanently. Once the construction work is completed, the actual care and cleaning of the marbles begins.

  • Initial cleaning (after laying)
  • Basic cleaning (regularly every 12 to 24 months depending on the demands)
  • Maintenance cleaning (daily and weekly)

Initial and basic cleaning

Even marble can not be laid without joints. When grouting, the joint compound forms a cement veil on the stone. If possible, you should clean this veil as soon as possible after grouting. If the cement veil could already set, it becomes a bit more complicated.

Neutral and alcoholic cleaners

Be sure to use neutral or alcoholic cleaners. Clear water with alcohol would be well suited. Rinse the alcohol-diluted water as quickly as possible. Under no circumstances should you use special cleaners to remove cement veils that are too aggressive. Even if there is a clearance for marble, you should be careful.

The maintenance cleaning

The maintenance cleaning describes the regular, ordinary cleaning of the marble. Everyday cleaning consists of two parts.

  • dry clean twice a day
  • cleanse once a week

For daily dry cleaning, preferably use a broom with natural bristles. For the weekly Unterhalsreinigung on the other hand applies - less is more. Preferably, use water that is clear or heavily diluted with alcohol. A neutral cleaner can also be used.

Avoid these cleaners and substances when cleaning marble

Many self-evident household cleaners must never use marble. Also, be careful when implementing so-called home remedies. Many dangers lurk here, as you can damage your marble sustainably massive. The following substances are to be avoided in any case.

  • limescale
  • strong alkaline cleaner
  • Acids and alkalis
  • surfactant-containing cleaners in general
  • fruit acids
  • Vinegar, wine, oil, fat

Lime and alkaline cleaners and marble

Lime cleaners are specifically designed to decompose lime. Marble is made of limestone, so it absolutely must be avoided. Strong alkaline cleaners should also be avoided during regular cleaning. For basic cleaning, you can use cleaners with a maximum pH of 11 to 12 if you rinse them quickly with clean water.

Acids and marble

Acids decompose marble. These include classic self-assembled cleansers containing vinegar, apple cider vinegar, citric acid, etc. Soaps and alkalis contain surfactants. These are deposited in open-pored marble. Here they attract dust and dirt particles formally, the marble stains clearly within a few years.

Oils and fats with marble

The situation is similar with oils and fats. Time and again on the Internet alleged insider tips are read, after which marble surfaces should be rubbed with oil. In fact, you get a nice, silky shine. However, much of the oil absorbs and binds dirt there. Its marble surface quickly becomes unsightly with regular use.

Tips & Tricks

After initial cleaning, you can protect marble with a dispersion. However, do not use plastic dispersions, but rather marble-approved natural stone dispersions. Depending on the manufacturer and the load, the surfaces must be re-treated at the latest for basic cleaning. If your marble is very unsightly, you can polish, grind and crystallize it. Polishing helps with minor irregularities, grinding in case of massive scratches and near-surface soiling. By subsequent crystallization, the surface is hardened (crystallized) and receives a high gloss. Subsequently, marble is less sensitive. In the outer area is formed in the margins of marble surfaces by the open-pore structure often an algae, moss or lichen growth. You can clean it by gently cleaning with a steam cleaner (cloth over the steam nozzles). However, regular steam cleaning also makes marble porous.