Plaster MDF boards


MDF boards are really versatile. In interior design, the wood composite panels are therefore extremely popular. Then comes the question quickly, if and how MDF boards can be plastered. You will therefore receive tips and information on the plastering of MDF boards.

Fundamentals for plastering MDF boards

When editing MDF panels, almost nothing remains to be desired. In addition, there are now more and more machining techniques for which MDF was originally not intended, such as plastering. In principle, it is of course possible to plaster MDF boards. However, many experts will advise you against it. If it really needs to be, you can resort to aids.

Therefore there are problems with the plastering of MDF

However, you can not traditionally plaster MDF boards like any other surface. Consider the different properties of MDF boards and their composition:

  • very smooth surface
  • high absorbency
  • possibly superficial traces of release agents (from production)
  • Emanations and outgassing of chemical ingredients

Nevertheless, plaster MDF boards directly

If you still need to plaster MDF boards directly, you will need to take some precautions. Release agent on the MDF surface may mean that the plaster will not hold. So you have to clean and grind the surface. When plastering you should use a flexible plaster, that is a plaster coated with plastic fibers.

In addition, the substrate must be provided with a bonding agent because of its enormous absorbency. In addition, a reinforcing mesh is incorporated into the plaster. Nevertheless, the danger remains that it comes to flaking. In addition, irregular brown spots may form through the outgassing.

Professionally plaster MDF boards with tools

It may happen that you have no choice but to plaster MDF. As we have just described, direct plastering can lead to problems. Therefore, you should use a trick when a ceiling or wall of MDF boards must be plastered imperative.

You can attach gypsum plaster boards to the MDF boards in advance. You can plaster almost any mineral plaster on the plasterboard now attached. When plastering gypsum plasterboard, however, pay attention to the special measures to be taken (strip strip, net reinforcement, bonding layer, etc.).

Tips & Tricks

Also, when MDF boards quickly reach their limits during plastering, there are plenty of other techniques and methods for processing MDF boards. For example, you can veneer excellent MDF boards.
Plaster MDF boards

FAQ - 💬

❓ Can MDF board be plastered?

👉 It's not a good idea to plaster over MDF, plaster will struggle to adhere to any wood based material even when primed. It's likely that the plaster will fall off whilst trying to install or once dried.

❓ Can you use bonding on MDF?

👉 MDF boards bond well with any type of wood glue. You can apply wood glue over MDF but producing an MDF joint is more difficult than it seems. With good screws and suitable wood glues, you'll be able to produce excellent joints.

❓ Can you put Venetian plaster on MDF?

👉 Unlike multi-finish plaster, Venetian Plaster can be applied to MDF, which can bring to life bars, kitchen cupboards and wardrobe doors. As Venetian plaster can be provided with a waterproof finish, it can be used as an alternative to bathroom and kitchen tiles.

❓ Can MDF be used instead of drywall?

👉 For DIYers, MDF planks can be a real boon. It's an option that requires few tools, goes up quickly – usually a weekend will do it – and doesn't require finishing. Using MDF to cover up stained or damaged drywall, plaster or popcorn ceilings is a practical alternative to repair or replacement, too.

❓ How do you seal MDF?

👉 Seal the MDF with PVA Glue: You can seal MDF surfaces with thin layers of PVA (white or carpenter's) glue. Most PVA-based carpentry glues require dilution with water to get a thin sealing layer on your MDF (which can cause the MDF to swell).

❓ What is the best wood filler for MDF?

👉

  • 1- Minwax 13616000 Wood Putty.
  • 2- Bondo 20082 Wood Filler.
  • 3- Donald Durhams Rockhard Water Putty.
  • 4- FamoWood 40022126 Latex Wood Filler.
  • 5- Goodfilla Water-Based Wood & Grain Filler.
  • 6- Erase-A-Hole Repair Putty for Wood & Drywall.
  • 7- J-B Weld 8257 KwikWood Wood Repair Epoxy Putty Stick.

❓ How do you join two pieces of MDF together?

👉 Spread glue on one side of the spline, insert it in the groove of one sheet, spread glue inside the groove of the other sheet, and then spread more glue on the ends of both sheets. Tap the sheets together, clamp them with bar clamps, and wait for the glue to set.

❓ What is the best adhesive for MDF?

👉 Most PVA wood glues, plastic resins, and epoxies will do an excellent job of adhering MDF to MDF or even MDF to wood. But when it comes to adhering MDF to another surface (such as drywall), an all-purpose epoxy or plastic resin is the best way to go.

❓ Does plaster stick to plywood?

👉 You need to plasterboard over the ply then skim plaster. Plaster will not stick to plywood.

❓ Will plaster stick to wood?

👉 One of the main things to remember is that plaster doesn't stick well to certain surfaces. Unfortunately, wood is one of them. The reason for this is that wood is generally smooth, and there's nothing for the plaster to grip onto. Plaster needs a 'key', and will stick much better to rougher, more textured surfaces.

❓ What's cheaper MDF or plasterboard?

👉 Yes, mdf is more expensive than plasterboard - but not after one factors in the plastering.

👉 MDF is much more durable than plasterboard with or without skim, it's dead easy to sand and cheap. The finish is as smooth and blemish free, unlike any plastering skim. It also provides something solid to screw into.

👉 Our range includes various types of plasterboard such as fireline, moisture resistant, soundbloc and insulated, as well as your standard square edged and tapered edged boards. Choose from a wide selection of plasterboards available via our bulk delivery service.

👉 Can i glue some of the plasterboard straight onto the mdf stair? It is only to be used as boxing, no real weight to go on it, altjough maybe obe bit may be a shelf for up to 8 bottles of wine. Any thoughts welcome. Target: Mortgage free by 58. The answer is yes you can stick Gyproc to MDF but don't use any of the waterbased adhesives.

👉 Available Instore Plasterboard Standard 1800x900x9.5mm (Sq. Edge) Product Code: 27681 Inc Vat€12.95 Ex Vat€10.53 Available Online Available Instore


Video Board: Tommy's Trade Secrets - How To Plaster A Plasterboard Wall Part 1