Miter saw comparison 2018

Purchase advice for miter saw comparison or test 2018

  • Whenever wooden strips or plastic pipes are not cut straight but obliquely, the miter saw is used. It can be used to make a 45° cut, as required for wooden frames or angled pipelines.
  • Miter cuts can also be made with other devices such as Japanese saws or electric chop saws. The advantage of a hand-operated miter saw with hacksaw, however, is that it can be used flexibly and has significantly more cutting accuracy than the large electrical appliances.
  • When purchasing a miter saw, be aware of the cutting height and cutting width: these values ​​tell you how large the workpieces you want to saw can be. 14 teeth per inch are a good guideline - such a saw blade can handle wood, plastic and aluminum. The more teeth, the finer the cut.

Miter saw comparison 2018: miter

The miter: cut with angle

Miter saw comparison 2018: teeth


When the handyman speaks of a miter, he means one corner connectionthat arises because of that two workpieces cut at an angle are put together.

The miter cut creates a miter angle: Sawing two strips at a 45° angle and placing the ends together gives you a typical 90° miter, such as that used for frames.

You want to cut wooden slats to make a picture frame? Or you may want to trim a PVC pipe at an angle for you get a flush 90° angle?

Whenever it comes to one Cutting with a specific angle goes, the miter saw is used.

It must first the separate miter be mentioned, the the simplest tool for sawing a miter is.

Miter saw comparison 2018: comparison

The sunk in the miter box Slots are already provided for certain miter angles and can be operated with different types of saws. The downside is that this Cutting shop often not exactly are responsible for unnecessary waste.

In our Miter Saw Comparison 2018, we'll explain what you need to consider if you want to buy the best miter saw, especially the Cut in height and width as well as the possible angles that you can create at work.

  • for Japan saw comparison
  • for battery jigsaw comparison
  • for chop sawing comparison

Miter saw comparison 2018: miter

1. Save 3 Euro per cut and cut your own wood!

Sizing materials with a suitable tool is not difficult. Although you can borrow a miter saw from Obi, Hornbach or Bauhaus or have the wooden strips cut, the costs increase with each miter cut.

Significantly more effective is the one-time purchase of a cheap miter saw that you can buy for only about 50 euros. The combination of hacksaw and miter box makes the hand-operated miter saw universally applicable and very precise.

The electric panel saw is a multifunction tool:

Miter saw comparison 2018: 2018

If you want to cut even larger beams or boards, that's one Pull, miter and miter saw recommended. These electric miter saws are also called panel saws and are real all-rounders. They can be used to replace the following tools:

  • circular saw
  • Crosscut and saw

Meanwhile, panel saws are also sold as miter saws, as most branded products such as Makita or Bosch also allow miter cuts.

A disadvantage of the electric miter saw is that it usually works less fine than a precision miter saw due to the coarse saw blade. If you are at a miter saw test attach great importance to exact cuts, should test either a hacksaw or a train saw.

hacksawcrosscut saw

Miter saw comparison 2018: miter

Miter saw comparison 2018: teeth

  • rough and fine cuts
  • suitable for wood, plastic and aluminum
  • for very fine cuts
  • suitable for wood

Miter saw comparison 2018: comparison

Miter saw comparison 2018: teeth

cuts to pressure (forward)
rather coarser, thicker and more rigid leaves
divergent tooth position
cuts on train (backwards)
rather finer, thinner and flexible sheet
straight tooth position
Hacksaws are all-rounders: With a pull saw (also Japanese saw) you can produce very precise miter cuts with little effort - as a miter saw for metal, however, this saw type fails. If you reach for a hacksaw, thanks to the divergent tooth position (alternating orientation), you can even cut aluminum.

2. Purchase advice: Teeth, cut and angle - what counts on a miter saw test winner

As with any miter saw test, it is all about the cutting result. In particular, the following categories should be considered:

2.1. Only real with 14 teeth per inch

At the heart of every saw are the teeth you will find on the saw blade. Depending on the position and number of teeth, there are different cutting results. Basically, you should remember the following:

Rule of thumb:

The more teeth a saw blade has, the finer the cut will be. If a saw blade has only a few teeth, it is more suitable for rough cuts.

To help you get a better overview, we explain to you which saw types show how many teeth per inch.

sawteeth
Zimmermannsäge

Miter saw comparison 2018: teeth

  • 8 teeth per inch
bucksaw

Miter saw comparison 2018: teeth

  • 11 teeth per inch
Japanese saw

Miter saw comparison 2018: comparison

  • 22 teeth per inch
hacksaw

Miter saw comparison 2018: miter

  • 24 teeth per inch

Classic miter saws with about 14 teeth per inch are therefore suitable for both rough and fine work. So you can work on both wood and aluminum or plastic, as long as they are not too massive workpieces.

2.2. The miter cut: It depends on the angle

Before you buy a cheap miter saw, you should first check how big the wooden strips you want to saw.

Miter saw comparison 2018: comparison

Unclean miter: With a precise miter saw you produce gapless mitres.

The cutting height indicates that how high a workpiece may beso that it can still be worked with the miter saw.

  • Most saws here move between 90 and 150 millimeters cutting height

Then it's time to check which cutting angles are sawn with the miter saw should. The most common mitres are:

  • 45°: needed for picture frames (maximum average width 100 to 200 millimeters)
  • 90°: for rectangular cuts (maximum average width 160 to 200 millimeters)

If you do not just want to edit 45° or 90° angles, it's important to pay attention to a freely adjustable angle - where some branded saws even allow vertical adjustments. Almost all manufacturers pay attention to one Winkelrasterungthat helps you with presets in finding the right setting.

Miter saw comparison 2018: miter

With the whetstone to the miter saw? Not!

Although you can use the right grindstone set to make almost any blade sharp again, but should you also put your hand to the teeth of your miter saw?

Our recommendation is no! - Stay away from the grinding tool. The blades of saws are commonly replaced simply because the filigree tooth positions can not be easily taken into account when grinding.

Even in the context of the whitening test of the Stiftung Warentest we did not recommend sharpening blades with a wave or a saw blade: "They belong in professional hands".

To replace a saw blade, the thumbscrew is turned on, allowing the saw blade to be loosened and replaced without tools. Saw blades can be purchased directly from the manufacturer or in online shops such as Amazon.

Similar sites

  • Crafting templates and craft arches
  • Tinker folding cards
  • garage door types
  • Tinker with wood
  • coloring
  • Lawn Care - Scarifying, Aerating, Sowing, Mulching, Fertilizing, Lawning and Watering
  • The miter saw for fast and accurate cuts
  • Save energy: tips for more energy efficiency in the home
  • Coloring pages and coloring pages
  • Make paper flowers yourself
  • Handicrafts with chestnuts
  • Surveillance Camera Test: Arlo Pro 2 and Security System

Video Board: 10 Inch Miter Saw Comparison