Drain the washing machine with water

Most washing machines run reliably for many years. Nevertheless, it can always come back to smaller incidents. Such a possible incident is when you can not drain the water on a washing machine. But you do not have to call the customer service yet. Afterwards we will explain how you can drain the water yourself at a washing machine.

Reasons to drain the water at the washing machine

First, you have to differentiate between two ways to drain the water. Once there is a defect, with the second possibility it is the residual water that remains in each washing machine:

  • Washing machine does not pump anymore
  • pumped out washing machine should be completely drained

The machine is not pumping anymore

If your washing machine does not pump anymore, there are several reasons for this. We have put together possible causes for you here: washing machine does not pump.

If you already know the reason why your washing machine is not pumping off, you can of course also drain the water according to the instructions below.

Functioning washing machine should be completely emptied

Of course, there are also reasons why you can drain the water from a functioning washing machine. For example, if you want to move or send the washing machine.

Step by step instructions for draining the water in the washing machine

  • Floor cleaner (as you can not avoid leaking water)
  • Transport safeguards (if you want to move or send the device)
  • Instructions for use for the washing machine
  • Wasserpumpenzange
  • screwdriver
  • rag
  • Trap container to the water
  • Stool or box on which you can put the washing machine

1. Preparation

Be sure to unplug the power cable from the washing machine first. Then turn off the water at the stopcock. If you want to ship the machine or move it, you must complete the washing machine.

It is best to lift the washing machine with the help of a helper only on the stool or the box.

2. Drain the washing machine with water

In the base area is usually a small plastic lid. Depending on the age of the machine may be the front, side or rear (rather rare). Behind it you will find different parts. For older machines, only a slotted cap that you can turn up. In newer machines additionally a wire rod for emergency opening of the lock and possibly a hose with a sealing plug.

Behind the rotatable closure is the lint filter. On older machines, turn off the cap and pull out the strainer. But first put the water tank under it, because all the water runs out of the machine immediately.

To prevent this more or less uncontrolled leakage, better modern machines have in addition the hose piece behind the flap. Pull the tube over your vessel and open the closure now controlled.

In any case, you should also pull out the lint filter and clean it. After the water could drain, you can close everything again. Now the water is completely drained on your washing machine.

Tips & Tricks

If you want to store your washing machine for a longer period, we recommend that you use a simple washing program to run your washing machine with vinegar before completing the washing machine and draining the water. It not only decalcifies, it also prevents unpleasant odors and kills bacteria.

Video Board: Washing Machine water Drain Problem-Diy Washing Machine Repair Hindi-Washing Machine Tips And Tricks