Pneumatic nailer comparison 2018

Purchase advice for compressed air nailer comparison or test 2018

  • Pneumatic nailers are best suited for quickly fixing solid wood boards, baseboards or plasterboard panels. You can use this tool to perform the same tasks that are possible with cordless screwdrivers or electric baggers.
  • Above all, a high-performance compressor is important for its use, as it provides the necessary working pressure and air throughput.
  • As a rule, the devices are offered with extensive accessories, so you can start working right away. Low-cost pneumatic nailers may experience jamming or high wear on seals.

Pneumatic nailer comparison 2018: pneumatic

Does this sound familiar to you? You have to attach a whole series of wooden slats in several rooms and the arm will be long and longer. No wonder - because with the hammer, it is a tedious business and a tedious on top of that. We therefore recommend a practical alternative: the pneumatic nailer.

Skirting boards, gypsum plaster boards and various woods can be easily fastened with compressed air nailers. In many companies, these tools have long since become standard equipment because they are both reliable and easy to maintain.

In the compressed air nailer comparison 2018, we not only offer a solid purchase advice, but also reveal for which use purpose you should use which type of nailer.

1. How does a pneumatic nailer work?

Pneumatic nailer comparison 2018: 2018

The pneumatic nailers work by means of a compressor, which is connected by hose to the device.

Pneumatic nailers are among the nail guns, the pneumatic tools that allow nails to shoot in different materials. To avoid constant reloading, magazines are integrated into the device. Most magazines are big enough to hold about 100 nails, It should not be less, so you do not constantly have to reload. If the nails in the magazine are bundled in strips, the term "strip nailer" is usually used...

Unlike electronic tools, you will need a compressed air hose and a compressor to use these devices, If you use these tools for larger projects, we also recommend a compressed air tank or compressed air storage.

What is a compressor?

A compressor is a machine that compresses gases and is therefore referred to as a compressor. The drive is usually done by electric motors, which ensures a variable delivery quantity, suitable for air consumption.

There are also differences between a pneumatic nailer and a compressed air stapler. While a pneumatic nailer only places nails on materials such as wood, press and compressed air staplers use staples only.

A so-called driver is driven by compressed air and set in motion. The nail is then driven by a blow on the nail head in the material. In order for the device to be ready for use as soon as possible, the following nails are pushed over with a pulse. For this reason, these devices are also called impulse nailers.

An overview:

  • the work is done efficiently and fast
  • high reliability
  • maintenance
  • Accessories such as compressed air hoses and compressors required

2. Which pneumatic nailer types are there?

Combined NagleltackerClassic pneumatic nailer

Pneumatic nailer comparison 2018: nails

Pneumatic nailer comparison 2018: comparison

  • inexpensive
  • also applicable as a stapler
  • versatile accessories (nails, staples, spare parts, oil)
  • not suitable for solid wood and roof battens
  • Jamming often occur
  • extremely uniform result
  • Setting of nails also possible in battens and solid wood panels
  • different types of nails can be used
  • Rare loading inhibitions allow continuous operation of the device
  • expensive in price
  • Accessories are sometimes low

3. Purchase criteria for pneumatic nailer: You must pay attention to this

3.1. The weight

In an air pressure nail gun, the weight plays a special role, because it is a tool that is always guided and operated by hand.

Pneumatic nailer comparison 2018: nailer

The weight plays a big role especially during longer work.

The professional devices from Bosch or Prebena usually weigh little more than 1 kg and are among the most popular brands. In contrast, cheap tools from other manufacturers often weigh up to 2 kg. If you intend to use the devices permanently, we recommend, of course, pay particular attention to the weight. Experience shows that devices with particularly high weight can quickly lead to problems with safe guidance.

3.2. Air consumption and working pressure

To ensure that sufficient compressed air is always available, you need a compressor. For the combination of compressor and nailer also a compressed air hose is needed, which is provided with a connection of 1/4-inch.

Of particular note is the working pressure.To achieve the highest performance, a compressor with a pressure of 8 bar is recommended, Sufficient compressed air is at a consumption of the devices of only 0.1 to max. 0.7 l per shot but no problem.

3.3. equipment

Pneumatic nailer comparison 2018: comparison

As a rule, upset nails in various sizes are used.

Most used are compression nails, which are between 15 and 50 mm in size, Since our proposed tools cover this size range, they can be used in a variety of activities.

The purchase of a pneumatic nailer accessories are enclosed. For quick use you will need lubrication oil and appropriate nails for the device. For combi tools additional needles for the integrated tacker are needed. Mannesmann often equips his devices with a comprehensive range of accessories. For many other manufacturers, you should make sure that you still order matching nails to the device.

4. Questions and answers about compressed air nailers

4.1. Which nails are best?

The differences in the processing of base and glazing beads arise only from the different sizes of the nails. Drywall screws with a size of 3.9 x 25 or 3.9 x 35 mm are used especially for Tockenbauwänden, if the substrate is a wooden structure or metal.

The most commonly used type is the Type J type stub nail. Of course you must make sure that the length of the nails has to be adapted to the board thickness. 20 mm nails are used for Rigips panels to be attached. If you want to use the pneumatic nailer for battens, we recommend nails with a size of 50 mm. When nailing everyday, often only nails are used, which are around 35 mm in size.

Special roofing nails are also available to repair your roof, but they are rarely needed for everyday tasks.

4.2. Which oil should I use for the pneumatic nailer?

Pneumatic nailer comparison 2018: 2018

For maintenance is best acid and resin-free oil.

When used regularly, the equipment should be sufficiently oiled and lubricated. For this purpose are usually a few drops of acid and resin-free oil done in the hose nozzle. You can find out about the frequency of maintenance in the enclosed operating instructions. Although there is special oil for pneumatic nailers to buy, you can actually use any resin-free gear oil for maintenance.

4.3. Which compressor should I use for the pneumatic nailer?

The purchase recommendation of a pneumatic nailer is of course simply pronounced, but what good is the best example, if the nailer is not enough compressed air available. To achieve a satisfactory result, nailers provide a minimum working pressure of 8 bar and a 100 l / min air flow rate. Commercially available reciprocating compressors are able to meet this requirement.

If you want to work independently, we recommend a cartridge nailer. After all, the air pressure cartridge ensures the necessary pressure for frictionless drive.

4.4. Stiftung Warentest

The Stiftung Warentest unfortunately does not offer a separate category for the best compressed air nailers in the test and consequently has not been awarded a pneumatic nailer test winner.

Similar sites

  • Compressor: Select and use Compressed Air Compressor
  • wood splitter
  • key Finder
  • Cordless Screwdriver
  • wine refrigerator
  • WC seat
  • doghouse
  • lawn fertilizer
  • Airbrush compressor
  • Sleeping bag
  • mowing machine
  • game camera
  • Bicycle helmet
  • Electric scooter
  • tENT

Video Board: PTR Live! Ep 120 - Best Framing Nailer Shootout!