Prices for drywall profiles


The prices for drywall profiles are generally not very high, as profiles are made very easily and at low cost in large quantities from sheet steel. Prices for profiles are usually given in price per meter, so when buying you have to pay attention that a four-meter-long drywall profile costs four times the specified price.

Ordinary drywall profiles such as CW profiles or UW profiles are usually priced between two and three euros per meter, special profiles with higher material thickness such as UA profiles are much more expensive, usually around six to seven euros per meter. In many cases, however, in contrast, the necessary small material for the installation of drywall profiles is comparatively sensitive expensive - plug angle, Drehbolts, Schlagdübel and the like often make up a not small part of the total price. By the way, the use of wood studs is not cheaper - but it does a lot more work and can also be forgiven over time.

Saving on the framework is usually difficult

Who wants to push the total price of a drywall project, does that best with the plates and the insulation material - a little less heat value, thinner plates without extras - and already the price is falling. On the other hand, it's practically impossible to save on the stud frame - the UW profiles run along the entire wall surface, which is unavoidable, and the specified distances between the CW profiles must always be adhered to - otherwise the wall will wobble. For suspended ceilings, it looks similar - here, at most, the maximum possible distance in the substructure and the slat design can be selected, but this has a significantly negative impact on the load capacity of the ceiling construction. And much can not be saved here anyway.

Reinforcements do not always have to be

One option is simply to dispense with UA profiles under certain circumstances, if the door is not wider than 88.5 cm for door installation and weighs well below 25 kg. Then you can get along with conventional, non-stiffened profiles. But by no means should one save on what is necessary - structural weaknesses of the substructure soon become noticeable on the finished wall.

Prices for drywall profiles

FAQ - 💬

❓ How much does drywall cost per square foot?

👉 Drywall Prices Drywall Prices Cost Per Square Foot National Average Cost $2.12 Minimum Cost $1.20 Maximum Cost $3.00 Average Range $1.60 to $2.35

❓ What is a drywall profile used for?

👉 Also drywall profile is a durable and processable filling material. And usually used in jacketing. It is due to its aesthetic appearance and its ability to make decorative plaster and paint without the need to make additional during the jacketing. During this application, detail profiles to ensure the implementation process properly adhered to.

❓ How much does sheetrock cost per square foot?

👉 Sheetrock and drywall costs $10 to $20 per sheet or $0.30 to $0.50 per square foot on average, depending on size, thickness, and type. Gypsum plasterboard prices are $12 to $16 per sheet. Drywall materials cost $200 to $400 to cover the walls and ceiling of a 12' x 12' bedroom (500 SF). *Material prices.

❓ What size drywall do I need for my project?

👉 Common drywall sheet sizes are 4' x 8', 4' x 10', and 4' x 12' for constructing interior walls and ceilings. Where to buy? How much do I need? What is the cost to install? Can I install DIY? The following table shows the average drywall cost per sheet. Cost data is from research and project costs reported by HomeGuide members.


Video Board: Drywall Prices in Kenya shillings 0740427086: Gypsum Board Prices in Kenya Shillings.