Apply rolling plaster to plasterboard

Rigips walls or drywall constructions can be a very good and inexpensive way to do the plastering yourself and thus save craftsman costs. If roller plasters based on synthetic resin or lime are used, a subsequent painting of the wall can often be omitted.

Apply rolling plaster to plasterboard walls - you must pay attention to this

Rigips is a very absorbent substrate - a sufficient primer with a suitable depth of soil before applying the plaster is here in any case necessary. The filling of the plates and also of the screw holes should be checked before - it must be really absolutely flat and even. Rolling plaster is relatively fluid and therefore produces only a very small layer thickness - with roll plaster can therefore compensate for any unevenness hardly. Make sure that the acrylic joint is flat as well, especially in the corners and edges, and cover it with deep primer in any case. Then you can easily apply the roll plaster to the plasterboard wall. You can even apply lime plaster on priming walls without priming - even a subsequent brushing is no longer necessary with lime plaster.

Fast wall design, simple finish

Lime plaster as a rolling plaster is a good choice for interiors - it can even be applied without primer to plasterboard, offers an interesting, slightly rustic-looking appearance and then requires no paint. Since it is very breathable, it allows moisture that could get to the plasterboard, also escape easily, in addition, it is particularly mildew resistant. So if moisture gets into the plasterboard construction, the damage will still be limited with lime plaster, while airtight resin plasters can often promote mold growth and moisture accumulation. In addition, lime plaster on plasterboard is the quickest way to plaster walls and drywall structures indoors, in general, for most lime plasters, even on Rigips no primer needed, and then no painting over the plaster. A single coat of lime roll plaster is already sufficient. This saves time, material and costs.

Video Board: How to skim coat using paint roller trick- Getting rid of Knockdown Texture