Rooftop steps are the way for the chimney sweep


Roof steps provide the way for the chimney sweep on sloping roofs and, depending on the type of building, also act as escape routes. They must be stable and weatherproof, they must not corrode and, ideally, they should be resistant to treading and slippery when wet.

Runways and single steps

Runners for pitched roofs consist of individual dormer treads, contiguous overhead grills, ladder-like mounted rung constructions or running platforms with or without railings.

On the roofs of private buildings, individual steps are the most widespread as skylights. The individual footboards of the skylights are mounted in two semicircular hinge brackets, which are adapted to the degree of inclination of the roof so that the tread surface is horizontal.

Rooftop steps are the way for the chimney sweep: steps

For attachment, the individual roof steps are hung in transversely nailed roof strips. For reasons of stability, the roof strips under the roof steps are set twice. At the lower end of the support struts support rubbers are attached, which ensure a non-slip grip of the roof steps.

Top surface and components

For the installation of dumbbells, building regulations apply and must be carried out by roofers. The chimney sweep often takes off the roof steps. They are mandatory from roof pitches in the angle of five degrees and more necessary. The individual skylights must not be more than forty centimeters apart.

Especially with a staggered installation, the design plan should be coordinated in advance with the chimney sweep or roofer. In principle, roof steps must always be mounted one behind the other. The roof steps should be tested by the TÜV or carry the GS seal.

Provider and costs

  • frick-onlineshop.de offers complete sets for single steps as roof steps and running gratings made of galvanized steel.
  • dach-teufel.de offers products made of galvanized steel, aluminum and copper with fastening screws made of stainless steel.
  • schornsteinmarkt.de is an online shop for the roofing trade, which also sells roof trusses of all kinds to end customers.

The price ranges for docks is large. For TÜV-tested and durable skydiving you should calculate between fifty and a hundred euros each. High-quality stainless steel roof steps can cost up to six hundred euros each. Runways with running grates, platforms and railings cost several thousand euros.

Tips & Tricks

While optical factors play a crucial role in the selection and pricing of roofing, there are no restrictions on docks to the detriment of safety.
Rooftop steps are the way for the chimney sweep

FAQ - 💬

❓ What is the best way to sweep a chimney?

👉 0:558:02How to Sweep a Chimney - Do it Yourself & Save MoneyStart of suggested clipEnd of suggested clipIf you do want to sweep the chimney by going through the flue of the stove. You just need to removeMoreIf you do want to sweep the chimney by going through the flue of the stove. You just need to remove the baffle plate to do that just remove the bricks that are lining the inside of the stove.

❓ Do you sweep a chimney from the top or bottom?

👉 At this day and age, many, if not most, chimney sweeps clean the chimney from the bottom of the flue. They use power tools that often times clean way more efficiently than the older brushes. Sweeps who clean using this method will still go up on the roof at some point to finish up the cleaning and to do an inspection.

❓ Can a chimney be swept from the top?

👉 Rather than physically enter a chimney flue, a sweep can clean from the top or the bottom of the chimney and, as well as the traditional brush, a chimney sweep kit includes vacuums and specialist cleaning tools.

❓ How long should it take to sweep a chimney?

👉 How long will it take? Every flue is different, but on average a thorough cleaning should take about 45 minutes to an hour. This time can increase substantially if there is creosote present in your flue, if the flue is damaged in any way, or if there are blockages such as birds' nests.

❓ How often should you sweep a chimney?

👉 HETAS encourage having your chimney swept at least twice a year when burning wood or bituminous house coal and at least once a year when burning smokeless fuels. The best times to have your chimney swept are just before the start of the heating season and after your stove has not been used over a prolonged period.

❓ How often should you have your chimney cleaned?

👉 How often should you clean your chimney? Both the NFPA and Spisto recommend getting your chimney cleaned and inspected once a year by a qualified professional. Carli says that regardless of chimney type, you should you have your chimney swept at least one time a year.

❓ Is there a way to clean a chimney from the bottom?

👉 Step by Step Bottom Up Cleaning Attach the first piece of pipe to the brush. Insert the brush through the firebox into the chimney. Then by pushing and pulling the brush and rod, begin to scrub the flue clean. Add another section of chimney rod to extend the brush further up the chimney.

❓ Can you sweep a chimney from the bottom up?

👉 4:546:56Cleaning a Chimney Using the Brush and Rod Bottom Up MethodYouTube

❓ How often should you sweep chimney?

👉 once a yearBoth the NFPA and Spisto recommend getting your chimney cleaned and inspected once a year by a qualified professional. Carli says that regardless of chimney type, you should you have your chimney swept at least one time a year.

❓ What happens if chimney not swept?

👉 If you don't clean your chimney regularly, soot will accumulate around the flue causing an inability to draw smoke upwards. The smoke will then be directed to your room leaving black soot on the walls, furniture, and carpeting. It causes permanent staining around the chimney in some cases.

❓ How messy is chimney sweeping?

👉 Sure, it can get messy, but if you pick the right firm to do it for you, it shouldn't encroach into your living space or be inconvenient. In fact, your home should be just as clean as it was before the team started the job.

❓ How do you sweep a chimney with rods?

👉 There are two approaches to sweeping a chimney with rods; you can insert the rods at the bottom and push them up or you can do it the other way by pushing the rods down from the top. Here we’ll describe the “bottom to top” method as it is easier and shouldn’t require clambering about on the roof.

❓ How much does a chimney sweep cost?

👉 How Much Does a Chimney Sweep Cost? Standard chimney sweep services, including a general inspection and cleaning, can range from $75 to $250 depending on where you live. That number rises if your chimney hasn’t been serviced for a while, or if the sweep discovers repairs, structural issues or pest infestations that need to be addressed.

❓ How do I know if my chimney needs sweeping?

👉 At any sign the fire or flue is not working as expected: Should there be smoke leakage, the fire starts burning inefficiently or unusually cold then it is likely the chimney should be swept. It is wise to get a professional to check and sweep it in this situation

❓ How long does it take to clean a chimney?

👉 That will take an hour or two depending on where you live, the condition of your chimney and the speed of the sweep hired. The inspection and cleaning might begin inside, up on the roof, or both, and may or may not involve a camera. The sweep will remove any buildup on the chimney walls as well as blockages in the chimney itself.


Video Board: How To Work On Steep Roofs. The Pivit Ladder Boot