Build sliding door yourself

Build sliding door yourself: build

Sliding doors in modern design

Gone are the days when sliding doors were just a space-saving room divider and the customer did not have a large model range. Meanwhile, these silent gliders are a contemporary design element that It is impossible to imagine a modern interior without it is. They are still a practical matter, but increasingly convince by multifunctionality and a very attractive appearance.

A good example is the sliding door "Evolution" by Herholz. It is the further development of the multi-award winning and with the "red dot" awarded sliding door "Rush". An extraordinary eye-catcher is the visible track also with "Evolution". That's how it is the impression that the door is floating in front of the running track, brushed in the aluminum finish enhances the trendy character of this extraordinary door element.

Construction principles of sliding doors

Sliding doors can be opened, just like folding doors, into conflicting principles.

1. Related: The running machine is located in a running rail, which carries the load. A guide rail on the ground is possible against heavy commuting, but not mandatory.

2. Hanging with door support profile: The door runs on top of a chain on top of a track and transfers the load to many rollers. The lower guide is made by guide pins.

3. Standing: The running machine moves on a guide rail on the ground. An upper guide of the door is possible as a tilt protection, but does not apply to a free-standing sliding door.

Advantages of sliding doors

Sliding doors have the advantage over conventional swing doors that the weight is not one-sided on a hinge hangs, but is taken above or below the door. This makes sliding doors particularly suitable for heavy and large door constructions.

A clear disadvantage of sliding doors, however, is theirs elaborate construction: The running apparatus, the upper and possibly the lower guide make exact work, partly extensive conversions of the existing conditions and a meticulous alignment required - after all, nothing should jam.

New sliding glass door

Build sliding door yourself: build

In the middle of 2006, under the motto "space for lightness", Herholz launched a design-oriented, flexible sliding door system, the the individual design no limits. Whether as a chic sliding door between two rooms, read walk-in wardrobe or as a room divider, whether in front of the wall, in the wall, running between walls or under the ceiling, whether one or four wings - "Slide" convinces with numerous design variants and a contemporary design Diversity.

In addition to trendy cross-veneer and striking, dividing rungs, the successful aluminum sliding door system is now also available with all-glass doors without frames in clear glass, satined, mastercarrée, mirrored and matt white. A noble variant, which makes every room shine in a very special light.

Sliding glass door: build a sliding door yourself

Build sliding door yourself: door

Building sliding doors as interior doors is not that difficult for artisans with a reasonable level of DIY experience who have a well-equipped workshop. We will show you in detail how to build a sliding glass door, optionally with frosted, tinted or clear glass. The costs amount to about 250 euros.

For that you get one custom-made self-construction a sliding door for individual living needs, which hardly differs from professional solutions for interior doors and room doors.

Materials and tools

  • if necessary: ​​door frames for door frames
  • 4x beech solid wood strips, 197 x 5 x 2 cm
  • 4x beech solid wood strips, 100 x 5 x 2 cm (or customized)
  • 2x wooden strips, 197 x 1 x 0.5 cm
  • 2x wooden strip, 100 x 2x 0.5 cm
  • 1x sliding door fitting, 200 cm, for wall mounting
  • 1x roller bar with rubberized rollers, 95 cm
  • 1 wooden strip, 200 cm, in the thickness of the door frame + 1 mm as a spacer
  • 1 glass sheet, frosted or clear, 193 x 98 x 0.5 cm
  • Wood construction adhesive, e.g. Ponal construction PUR glue
  • Window joint sealant (e.g., Sista Dicht & Fest)
  • Countersunk screws 6.0 x 80 mm for wall mounting
  • 6-anchor

Tools:

  • Router with 20 mm and 35 mm milling head
  • Crosscut or miter saw
  • 10 screw clamps
  • Cordless Screwdriver

Build sliding door yourself: construction and storage

Build sliding door yourself: yourself

Floor rolls of the sliding door

Our sliding door is constructed as simply as possible, to allow the installation as possible alone. The glass of the door is embedded in the frame and glued with window joint sealant, the suspension and the drive of the door are available in stores by the meter.

On the floor, the glass sliding door runs without rail: rubberized plastic rollers keep the door in the lane. So no interventions in the soil must be made. For complicated floor coverings, e.g. high-pile carpet, also hard plastic or metal rolls can be used - the industrial trade holds roll bars in a variety of designs available by the meter.

Cutting and window mounting

Build sliding door yourself: sliding

All 5 cm strips of construction must with a miter angle of 45° be provided, as well as on one side the two long, 1-cm strips and on both sides of the short 1-cm strips.

First, now the two short and two long 5-cm bars folded on the floor to a door frame and glued at the corners with construction adhesive. On these strips and the door frame is now plentifully applied wood construction adhesive, then the disc is inserted. Left, right, up and down, the disc is held by the glued 1 cm strips (see drawing).

Very important: 2 cm at the top and 3 cm at the bottom to keep the fittings free.

Subsequently, the second layer of the 5 cm strips is glued with wood construction adhesive on the glass or thin strips. Now place the glue clamps evenly spaced around and generously spray the glass joints with window jointing compound. These should be tightened immediately with a finger dipped in detergent water or a special smoothing tool. "Inexperienced Verfugern" it is recommended to mask off the glass beforehand.

Milling the fitting grooves, fitting the fittings, hooking in the sliding door

Build sliding door yourself: door

Upper fitting and suspension

After hardening the construction overnight, the grooves for the fittings must be milled. For this purpose, a 30 mm deep and 35 mm wide groove must be milled in at the bottom, at the top it must be 20 x 20 mm (see drawings). It should the glue clamps attached to the side of the construction remain to avoid unnecessary tension in the material.

Subsequently will glued in the lower roller bar with construction adhesive, the upper one is screwed on with the small countersunk screws. Both strips should fit into the joint while sucking.

Now the wall mounting of the upper fitting is mounted: Should the door frame protrude over the wall, you have to make a spacer in the exact thickness + 1 mm clearance of the door frame from a wooden strip so that the door can be opened and closed. Finally, the door is pushed in and the stoppers and dampers of the upper fitting are mounted.

Tip: If no doorframes should be mounted, we have tips for installing doorframes ready here.

Your own constructed, unique sliding glass door is finished for a better living ambience.

Similar sites

  • Build your own insect hotel - building instructions
  • Build drums yourself
  • Garden house itself build from logs - completely self-made without kit
  • Tischsekretär - Build a desk tray yourself
  • Build blast cabin: construction manual
  • Build garden gate
  • Set up barbecue hut and grill kota
  • Building instructions: Build colorful children's tables and booths yourself
  • Gartenmöbel Bauplan-Archiv: Garden table, garden lounger, garden bench or porch swing to build yourself
  • Build workbench and tool cabinet yourself
  • Building sandbox - construction manual for a sandbox
  • Build boats
  • Build your own game tower: Spielhaus construction manual
  • Building play furniture and lamps for the nursery
  • Build a greenhouse yourself: A greenhouse for your own garden

Video Board: The Barn Door - Easy DIY Project