Spruce wood prices: What does the softwood cost?


Spruce wood is the most widely used and most widely used softwood in Germany. The high yields possible with spruce are just as responsible as the universal qualities of the wood. Both have an effect on the price. Find out where the price of spruce wood is approximately in this post.

Prices for lumber

As sawn timber, spruce wood can generally be priced between 400 and around 650 EUR per m³. Individual special species or very high qualities can occasionally be even more expensive.

Price differences

In class I / II one can expect prices between 400 and 450 EUR per m³. Class 0 / I spruce wood is more expensive at around EUR 100 per m³. High-quality, Nordic spruce and steamed spruce can then be up to 100 EUR more expensive. However, these prices only apply to lumber in the timber trade.

The price differences are therefore based in general on:

  • Quality and grading class
  • Thickness of the sawnwood
  • Place of origin (north or south)
  • Processing (steaming, edge processing, etc.)

Price comparison with other types of wood

Compared to (often more stable) pine, the spruce is a bit more expensive, but only slightly. The prices for pine are around 100 - 150 EUR per m³ below those for spruce.

As a softwood, spruce is much cheaper than a hardwood that is used as often as beech wood. Beechwood is around 100 - 200 EUR per m³ more expensive than spruce. High-quality, weather-resistant woods such as oak or Robnie cost already twice as much per m³ as spruce.

Spruce wood as a trunk wood

If you buy spruce as trunk wood from the forest you can go out depending on the strength class of about 70 - 80 EUR per meter for good wood. Very high qualities are around 90 - 95 EUR per cubic meter. Lower qualities (such as bark beetle infestation, quality class C or quality class D can reduce the price by 20 - 55 EUR).

Here you will find all types of wood at a glance

Tips & Tricks

Spruce wood can be a good and above all cost-effective alternative to heating. The prices for softwoods are significantly lower than for hardwood, but the calorific value per cubic meter is only about a quarter lower than that of hardwoods. Especially for the transition period spruce can be a good and cheap wood.
Spruce wood prices: What does the softwood cost?

FAQ - 💬

❓ What is softwood lumber?

👉 Softwood lumber comes from conifer trees. These include cedar, fir, spruce, and pine. These woods are called softwood for obvious reasons, as they can be easily dented with light pressure.

❓ What is Random Lengths report?

👉 Random Lengths International is a report on global markets for wood products, with prices and market summaries for North American lumber and panel items sold in international markets and purchased by North American importers.

❓ What is the price of wood?

👉 Key Data

LabelValue
Last445.6
Prior Settlement454.7
52 Week High1329
52 Week Low410.8

❓ Will lumber prices go down in 2022 in Canada?

👉 After a sharp increase in 2021, the price of lumber has dropped immensely in 2022, which is giving one western Canadian trader optimism that a more stable market will return.

❓ What are 3 types of softwood?

👉 Examples of softwood trees include:

  • Pine.
  • Redwood.
  • Larch.
  • Fir.
  • Cedar.

❓ What is the best soft wood?

👉 While balsa is by far the softest wood that you can carve, but it does not mean it is the best wood. Soft woods can be very different in color, durability, smell, price, availability, grain, and much more....Best Of The Softest Woods To Carve

  1. Balsa. ...
  2. Cedar. ...
  3. Paulownia (kiri wood) ...
  4. Basswood. ...
  5. Silver Fir.

❓ Will lumber prices go down in 2022?

👉 May 2022 some building material prices going down. Framing lumber and construction lumber have dropped dramatically in price over the last few weeks. By historical numbers, lumber still remains high. Treated lumber prices are also dropping.

❓ How much does a 2x4 cost?

👉 Lumber Prices

BoardStud*10'
2x3
2x4$5.17$7.65
2x6$8.82$7.65

❓ What is the price of lumber in 2022?

👉 Lumber is expected to trade at 421.45 USD/1000 board feet by the end of this quarter, according to Trading Economics global macro models and analysts expectations. Looking forward, we estimate it to trade at 356.57 in 12 months time.

❓ Is lumber prices going down in 2022?

👉 Prices for lumber fell to a new 2022 low this week, reports Matthew Fox for Markets Insider. The essential building commodity fell as much as 4% to $465 per thousand board feet, decisively below the low seen in early August of $470.

❓ Are lumber prices expected to drop?

👉 Ultimately, the housing market is on its way back to normal, and that means lumber prices are likely to remain back in the normal trading range prior to 2020 of $200-$600 per thousand board feet.

❓ Is spruce wood expensive?

👉 Spruce wood is cheap and easily available on the market. But the price of wood depends on many factors. Based on the quality of the wood, it is divided into grades. High-grade wood does not have defects and knots. High-grade spruce is more expensive, Whereas low grades have knots and cracks, so they cost less.

❓ Is spruce a hardwood or softwood?

👉 Spruce and pine are softwoods, and their density and hardness are similar. Both are light in weight and color. However, the processing of spruce wood is more complicated than pine. Because of their softness, they are unsuitable for projects with high wear and tear like flooring. Physical Properties

❓ What is spruce lumber used for?

👉 Spruce lumber is commonly used for paper production. The long fiber length of the cellulose fiber is the most important parameter in making quality paper. Apart from spruce wood, other softwoods are also used for paper production. Such as Pine, fir, hemlock, and a few other softwoods. Spruce wood is used to make quality boxes or crates.

❓ What is softwood lumber?

👉 Softwoods are dimensional lumber, meaning that they are cut into uniform sizes (2 x 4, 1 x 8, etc.). All of the boards of the same size in a stack at the lumberyard will be sold at the same price.


Video Board: What Kind of Wood Should You Build With? | WOODWORKING BASICS