Make the fires of Sweden yourself

Make the fires of Sweden yourself - instructions

Make the fires of Sweden yourself: make

A cozy fire for a romantic evening in the open air, during which you do not need to refill wood. A nice idea? No, a good plan, because making such a fire in Sweden is not rocket science.

Depending on the area, fires in Sweden are also referred to as a tree torch, a Swedish torch or a Finnish candle - in some cases even Siberian or Russian tree torches. There is no consensus about what they are called or where they really come from. But the atmospheric light and pleasant warmth that they emit. Whatever you call it, if you want to make your own Swedish fire, all you need is a trunk or straight thick branch, a chainsaw and something to light.

In the manual of your chainsaw you will find safety instructions, which you should definitely take note of when you saw your Sweden fire yourself, so that it is a pure joy. If in doubt, you can of course also simply buy a fire in Sweden.

Contents: Making the fires of Sweden yourself - instructions

  • Which wood is suitable for a Swedish fire?
  • The tribe: How fat, how tall, how prepared?
  • Sawing the fires of Sweden - cuts
  • Place the lighter - ignite the fire of Sweden
  • How long does a fire in Sweden burn?
  • What should be considered when burning a fire in Sweden?

Which wood is suitable for a Swedish fire?

In general, practically any wood is suitable, with the softwoods, because of the resin content, producing the more beautiful flame pattern than the hardwoods. These show more embers than flames.

The most commonly used for the Swedish torch is pine, spruce and fir wood.

The tribe: How fat, how tall, how prepared?

Make the fires of Sweden yourself: fires

Only straight stem or Astabschnitte are used. It should be at least 15 cm in diameter and at least 30 cm long. Basically, however, there are no limits in width and upwards. But stems whose entire burning time you can not monitor, do not make sense. The handling and the chainsaw set there automatically at the latest at half a meter in diameter and about 120 to 140 cm height limits.

Projecting branch stumps should be separated in any case. A thick, barky bark, which may already be loose in many places, for safety also remove, then fall not so many pieces glowing.

Sawing the fires of Sweden - cuts

Depending on the trunk diameter, different cuts are useful. Relatively small trunks with a diameter up to about 20 cm, are simply vertically quartered, to about 10 cm above the ground. For thicker trunks up to 30 cm in diameter, three vertical cuts are made (sixth) and a pedestal of approx. 15 cm remains.

Even thicker stems get best cuts, such as in the form of a double or triple cross.

Make the fires of Sweden yourself: make

Quarter division at smaller diameters.

Make the fires of Sweden yourself: fire

Three cuts for a 6 division.

Make the fires of Sweden yourself: yourself

Thicker stems must be shared several times.

Place the lighter - ignite the fire of Sweden

As lighters are grill, stove lighter and homemade lighters from wood wool and candle wax u. Ä. well suited. They are placed in the intersections of the saw cuts, and as far as possible sunk a few centimeters deep.

If there is not enough space at this point, simply cut something in with the chainsaw again, you will optimize your own fire in Sweden - of course drilling is also possible.

For thick trunks, a lighter is placed at each intersection. For the less thick ones, there is only one intersection in the middle to place the lighter.

Make the fires of Sweden yourself: yourself

A candle stub wrapped in wood wool works well as a lighter.

Make the fires of Sweden yourself: make

But with a normal stove lighter, the self-made Swedish fire burns just as fast.

How long does a fire in Sweden burn?

Make the fires of Sweden yourself: make

Determining the burning time in a Swedish fire is simply not possible, as it depends on many factors. These include the type of wood, how dry the wood is, whether it is windy and of course the size of the tree torch itself.

Roughly, of course, the smaller the Swedish torch, the shorter the burning time. Wind shortens the burning time as well.

An example from practice for orientation:

A well-aged fir trunk of about 25 cm in diameter and 125 cm in height, has burned in relative calm, in summer at about 22 degrees and dry weather, about 4 hours and 20 minutes and annealed. The socket did not quite glow.

Tip: If you make your own fire in Sweden, drill additional holes through the wood just below the base to intensify the fire and reduce the firing time.

What should be considered when burning a fire in Sweden?

Make the fires of Sweden yourself: make

  • Make sure your fire in Sweden and if possible in a not too windy place.
  • Within 2 meters should not be flammable or delicate things.
  • Caution: Larger burning and glowing parts break off in the course and fall down.
  • Flying sparks should always be considered.
  • Put a fire extinguisher, a bucket of water or sand handy.
  • Keep a shovel and rake or the like ready to retrieve glowing parts.
  • If you want to roast or cook something on the fire in Sweden, do it at the beginning, as long as the area at the top is still stable enough.
  • If you want to protect the subsoil, you can use a Schwedenfeuer-Ständer or a Schwedenfeuer-Schale. A self-built fireplace (here's the instructions), is well suited.

Similar sites

  • Jigsaw templates
  • Crafting templates and craft arches
  • Tinker folding cards
  • garage door types
  • Tinker with wood
  • coloring
  • Coloring pages and coloring pages
  • Make wooden toys yourself
  • Tinkering for the beginning of school and school enrollment
  • Make paper flowers yourself
  • Handicrafts with chestnuts
  • Building play furniture and lamps for the nursery

Video Board: Making Fire in the Rain