Repair and renovate a tabletop


When refurbishing a table top, it must first be determined whether only optical improvements are made or repairs are necessary. The work-up and removal of normal traces of use, we attributed to the optics. We repair the patching of holes or renovations such as a new flooring are material dependent.

Sand off signs of wear

Table tops are always made of materials that can be abraded except for the rarer plastic versions. When renovating common and usual signs of wear, a more or less intensive sanding with 400 grain sizes is usually sufficient.

Whether the edges have to be reworked depends on the grinding rate. In the case of stone and concrete, this is not the case; in the case of wood, the edges are touched from about an average of two millimeters of removal depth. In the case of hollow slabs, the connection of the corners must also be taken into account, which can become loose if the material is removed too much.

repairs

Unevenness, holes and cracks can be repaired well with resinous paints or synthetic resins, for example from model making. Individual color mixtures or transparent resins can preserve or restore the appearance of the tabletop.

Dents, tears and chipping on the edges can also be filled with resins that require casting frames to be tinkered with. They can be well fastened with screw clamps for the drying process. If the edges are more damaged, applying edge profiles may be the better alternative. They are available for gluing, screwing or ironing.

renewals

An old paint is refreshed by sanding and re-applying a paint. It is important to pay attention to the sealing character of the last spread to give the table top the required resistance to new stresses.

If a veneer is to be renewed, a uniformly absorbent surface must be prepared by grinding and priming. The demands made on the substrate for gluing new veneer are described product-specifically in the instructions for use of the respective manufacturer.

buffability

When working on a table top, the later possibility to treat it should always be considered. For example, to buff the board over and over again by polishing, a careful and appropriate choice of surface covering renovation must be made.

Tips & Tricks

Bended, wobbly and distorted tabletops can be corrected by "hanging" and moistening. Thereafter, the reinforcing can prevent re-deformation.
Repair and renovate a tabletop

FAQ - 💬

❓ How much does it cost to restore a table?

👉 Cost to Refinish a Table. A basic table costs $150 to $600 to refinish. The process is typically the same regardless of condition, and price changes only based on size. For any wooden table, the process involves stripping the old finish and applying a new final coat.

❓ How do you refurbish a table top?

👉

  1. Clean the Surface. Use gentle soap and water to remove dirt and oils from the table's existing finish. ...
  2. Apply Stripper. If the table is painted or varnished, you'll need to strip the surface. ...
  3. Clean With Mineral Spirits. ...
  4. Sand Table Surface. ...
  5. Apply Stain. ...
  6. Apply Finish.

❓ Can you refurbish a dining table?

👉 If you refinish a table with oil, you're done. For stain and paint jobs: Hamm recommends a clear coat to help with longevity—look for polyurethane or polycrylic, both require two coats. Sand between coats using fine-grit paper. Once your heirloom coffee table is looking good as new, style it to your liking.

❓ How much does it cost to refinish a dining table?

👉 It costs an average of $250 to refinish a table, with a typical range of $150–$400. The minimum cost to refinish a wood table is $80. The maximum cost is $700. Your project's cost will largely depend on table size.

❓ Is it cheaper to refinish furniture or buy new?

👉 Refinishing will almost always be cheaper than buying a new item.

❓ What is it called when you redo furniture?

👉 Furniture restoration generally involves light cleaning and cosmetic repairs, like sanding away scratches, repolishing wood, and washing fabric. Think of your job as making that thrift store chair look fresh-off-the-shelf again—during restoration, you're not making any dramatic changes or adjustments to your furniture.

❓ How can I tell if my furniture is laminate or veneer?

👉 A sure way to recognize wood laminate is when the grain does NOT follow through your piece. Wood Veneer is a sheet or thin layer of 'quality-natural-hardwood' that is adhered to a lesser quality wood surface. Wood Veneers give the impression of a more desired quality wood without being as costly.

❓ How do you strip and refinish a table?

👉 How to Strip & Refinish Wood Furniture

  1. Step 1: Choose a Work Area. Work in a well-ventilated area such as your open garage or on an outdoor deck or patio. ...
  2. Step 2: Strip Away Old Finish. ...
  3. Step 3: Sand It. ...
  4. Step 4: Apply Sanding Sealer. ...
  5. Step 5: Stain It. ...
  6. Step 6: Apply Sealant.

❓ How do you refurbish a wood table?

👉 Steps

  1. 1Clean the table. Use a damp cloth to thoroughly clean the table surface and remove any dirt or grime. ...
  2. 2Sand the table. ...
  3. 3Brush the dust off. ...
  4. 4Continue sanding. ...
  5. 5Use a finer grit sandpaper. ...
  6. 6Wipe the table with turps. ...
  7. 7Apply the first coat of varnish. ...
  8. 8Lightly sand the table.

❓ Is it worth refinishing a dining room table?

👉 Is My Table a Good Candidate? Refinishing isn't for every table. It's not for mass-produced, low-quality tables—those are meant for the fire pit. If your table is made of quality material, is a family heirloom, or has sentimental value, it's an excellent candidate for refinishing.

❓ Is table worth refinishing?

👉 Is My Table a Good Candidate? Refinishing isn't for every table. It's not for mass-produced, low-quality tables—those are meant for the fire pit. If your table is made of quality material, is a family heirloom, or has sentimental value, it's an excellent candidate for refinishing.

❓ What to do with an old dining table top?

👉 Here are some of my favorite ideas… Idea #1: Paint the apron and base a solid color, and re-stain the top in a rich stain color, like this dining table before and after from Blue 11 Interiors. Idea #2: Paint the table top and the base in different but coordinating colors, like this before and after table makeover from Celebrating Everyday Life.

❓ How can I Make my Kitchen Table Top look better?

👉 Idea #9: Add some sparkle to the top with glass, nailhead trim, etc., like this table makeover from Dwellings By DeVore. Idea #10: Replace an outdated or damaged top with a concrete table top, like this table makeover from Kara Paslay Designs. And finally, the most classic, never-go-out-of-style option…

❓ What is the best way to fix a dented IKEA table?

👉 Probably the most satisfying part of the process is fixing all of those little dents and gouges in your table using the 3-in-1 Repair Sticks. I love that these come in so many different colors (they’ve even got one that’s perfectly color matched to IKEA’s white furniture!), and they do such a great job of making the issues way less noticeable.

❓ How do you cover a table top?

👉 Rather than introducing it to your axe, cover the tabletop in a simple, smart or artsy way. Probably the simplest way to deal with an unattractive table is to hide it under a good-looking tablecloth. On the "classy" scale, a linen or cotton tablecloth trumps a vinyl cloth, and you can toss it in the washing machine, as needed.


Video Board: Thrift Store Rescue / Teak Desk Refinish