Tile cutter comparison 2018

Purchase advice for the tile cutter comparison or test 2018

  • A tile cutter is a hand tool for cutting tiles. It is always used when you want to renew the tiles in your bathroom or kitchen.
  • Choose between a manual tile cutter, which you can operate by hand and without electricity (cost on average: 75 euros) and an electric tile cutter with diamond cutting disc (cost on average: 150 euros), which can cope even with porcelain stoneware.
  • Always pay attention to the width and thickness of your tiles before buying: Depending on the format, you must adjust the cutting length and thickness of your tile cutter.

According to a Forsa survey, 30 percent of respondents consider renovating the bathroom after about 8 years. It's just that Tiles on the floor and on the wallswhich have lost their luster over the years and should best be replaced.

Glue tiles from professional craftsmen - costs for 50 m² at a glance:

  • 150 euros: Primer
  • 1,500 euros: Lay tiles
  • 50 Euros: Pull joints
  • 50 Euros: Edge strips
  • 250 euro: Material

In this bill from the tiler are neither the tiles, nor the removal of the previous tiles taken into account. Also keep in mind that some craftsmen work on an hourly basis: every use of the tile cutter costs you money.

Tile cutter comparison 2018: comparison

With a tool from our tile cutter comparison 2018 you can Take care of cutting your tiles yourself and save a large part of the total of 2,000 euros (see example in the info box).

What to look out for, if you want to buy the best tile cutter, see our guide, in which we especially the categories Illuminate cutting length, tile thickness and the frame of the tile cutting machines.

1. Save up to 60 euros per square meter - cut and lay your tiles yourself!

If you have a little skill as a handyman, you can tiling your own bathroom or kitchen with a good tile cutter. The first decision you need to make when choosing your personal tile cutter test winner is whether you have the Tile or break tiles want. The following table will help you with the orientation:

Tile cutting machineExplanation of the type
Manual tile cutter

Tile cutter comparison 2018: tile

A manual tile cutter is manually operated, requires no electricity and no water and cuts tiles up to a thickness of about 1.5 cm, The tile is put on the angle stop, cut and broken with the help of the breaking device.

Quick to use, clean cutting edge, flexible and uncomplicated

Tile cutter as a wet cutter

Tile cutter comparison 2018: tile cutter

The main difference to the manual tile cutter is that in a professional electric tile cutter a Diamond cutting disc is used. The wet tile cutter works like a circular saw (or table saw) and splits even thicker tiles or other materials (such as mirror or marble tiles).

This type of tile cutter works mostly with water: a sink under the cutting edge ensures Cooling, otherwise the glass would burn out. In addition, the moistening ensures that the formation of dust is kept within limits.

high performance, even for very thick or solid tiles, professional tool with high cutting length

Radial tile cutter

Tile cutter comparison 2018: cutter

One type of electric tile cutter is the radial tile cutter.

When cutting your tiles with this tile cutting machine, you do not have to move the tile yourself. Much more move the cutting edge on a guide rail over the tile to be cut.

are characterized by high precision and clean cutting edges

Who is after one cheap tile cutter searches, will have to choose primarily manual models. who cut porcelain stoneware with the tile cutter wants, should resort to an electric brand product. The following manufacturers of tile cutters are recommended: Bosch, Einhell, Wolfcraft, Sigma and Kaufmann.

2. Purchase advice: With which tile cutter through which tile?

2.1. The cut length: how big are my tiles?

Large tiles in XXL

Tile cutter comparison 2018: tile cutter


If you want to bring a Mediterranean flair to the house, you can not miss large XXL tiles in terracotta brown. Tiles are particularly difficult to work with 120 x 120 cm format, Here you need one Tile cutter with a cutting length of at least 1,200 mm.

Basically it's easy: Who wants to cut large tiles with the tile cutter, also needs a high cut length, The cutting length is given in millimeters: A tile cutter with 600 mm cutting length is suitable for tiles with a width of 60 cm, a tile cutter with 1.200 mm cutting length for tiles with a width of 120 cm, etc.

Ideally Before buying a tile cutter, check which tile you would like to process in the future and are based on the width and thickness of selbiger.

2.2. The average thickness: how thick are my tiles?

In addition to the width and the thickness of the tiles is crucial. There are significant differences, according to the intended use:

  • Private use: In the private sector, the thickness of a tile is about 8 to 12 mm, Here you can work with both a manual and a wet tile cutter and achieve good cutting results.
  • Commercial use: The thickness of a tile can be down to a value of 30 mm rise, such as when porcelain stoneware is to be laid. Here we recommend the use of a high-quality wet tile cutter.

2.3. The frame: Finally stand on your own!

An underframe helps you to cut the tiles at a comfortable working height. In addition, the risk of injury is reduced if you work at a stable table. However, you can also choose your own worktable as a base or - in the case of a manual tile cutter - cut tiles directly on the floor.

Tile cutter comparison 2018: cutter

3. Your questions about tile cutters and tile cutting machines answered by us

3.1. Can you cut tiles without a tile cutter?

Cutting a tile is not rocket science. Once a cut edge is cut into the tile, the tile can be broken at this point. So one occasionally reads that laymen cut a tile with a router, an angle grinder or a simple nail -We strongly advise against this procedure.

A cheap tile cutter costs less than 50 euros and provides better results than the aforementioned improvised methods. In addition, you put yourself at risk of experimenting, because you can injure yourself quickly when cropping.

3.2. How much power should an electric tile cutting machine have?

While you have to lend a hand to a manual tile cutter, an electric model will do the job. With a Power of about 600 to 800 watts you can even cut and lay tiles with a thickness of 30 mm.

Tile cutter comparison 2018: tile cutter

3.3. Can you borrow a tile cutter?

Yes, because many big ones DIY stores now offer the Rental of hand tools on. At Obi you can borrow a tile cutter for € 23.60 for a total of 4 hours (as of: 24.01.2017).

For some, this offer may be tempting, but considering that manual tile cutters are already available for less money, it may spoil your enjoyment.

3.4. How do I clean the joints in my bath?

If you want to beautify your bathroom a bit, but do not want to replace all the joints at the same time, you can take a toothbrush and work wonders with it. With something Scouring milk or a joint cleaner provided you get clean joints that look hygienic. By the way: With an electric toothbrush, the results are even better!

Handy guide in paperback format:

The Stiftung Warentest has published a guidebook entitled "Repairs Compact - Kitchen + Bath", in which you will also find more besides cleaning joints Instructions for craft activities in the bathroom or in the kitchen such as repairing a cistern or replacing faucets.

Similar sites

  • Lay tiles correctly
  • Painting tiles - painting tiles
  • Lay tile on tile
  • Tile grout - instructions
  • PVC: polyvinyl chloride as floor covering
  • Laying large tiles - this is how it works
  • Clean joints in the bathroom and garden properly
  • Porcelain stoneware cutting - tips for handling porcelain stoneware tiles
  • Change a single tile
  • Tool for laying tiles
  • Tile the terrace
  • Tile stairs properly - you must pay attention
  • Surveillance Camera Test: Arlo Pro 2 and Security System
  • Tile cutting

Video Board: 7 Best Tile Saws 2018