Tile cutting

Tile cutting: cutting

tile types
  • cement tiles
  • earthenware tiles
  • Stoneware tiles
  • Porcelain stoneware tiles
  • Split and clinker plates
  • terracotta tiles
  • Tiles in wood look
  • Natural stone tiles
  • porcelain tiles
  • u.v.a.m.

When it comes to tiling, we have already given a detailed guide here. As part of the planning - but definitely before buying the material - should be clarified how to cut the tiles.

While cutting ordinary ceramic tiles is still relatively easy, large sized porcelain stoneware tiles, imitation wood or natural stone tiles, and glass mosaic tiles are not that easy to work with.

With the right choice of tiles (basic knowledge here), the right tool and great care in processing, however, this is definitely feasible for any ambitious DIY enthusiast.

A certain perfectionism is rewarded in this case for many years with a beautiful and functional bathroom.

We have already created a guide for tile planning, which you can find here. The harder it is for you to cut and drill the tiles, the less cuts you need to make. Also consider the waste of material during procurement.

Need a tile cutter?

Tile cutting: tile

If you tile a whole bathroom or more, a tile cutter is recommended.

What could be better than using a tile cutter to cut tiles? The purchase of a tile cutter is not necessarily cheap or absolutely necessary. Also, some of the manual tile cutters can cut even softer tiles reliably.

A careful comparison is definitely worthwhile. Review your requirements and then make a decision for an appropriate tool. So, for example, pay attention to what the particular device is suitable for, which formats can be cut with it, whether cutting and breaking are possible in one operation, etc.

In a larger project, such as in all tile laying work as own contribution in a new building or the like, it may be worth buying a large-scale, electrically operated and water-cooled tile cutter. Cutting a large amount of hard tiles without tile cutter with water cooling is not effective.

For smaller projects and / or softer materials, the tools described below may be sufficient.

Cutting tiles with Flex or angle grinder?

Tile cutting: tile

For smaller projects, an angle grinder is often sufficient.

Equipped with a diamond cutting disc, many types of tiles can certainly be cut with an angle grinder. For example, all wall tiles and many not too hard and brittle floor tiles. These include stoneware and stoneware tiles and cement tiles.

When you cut porcelain stoneware tiles, it depends very much on the individual hardness, size and thickness of the material. In many cases, a wet trimmer (electrically operated tile trimmer with water cooling) is preferred for cutting porcelain stoneware tiles. You can also rent or rent such a device.

Even porcelain tiles can be cut with a clean simple cut with an angle cutter and then broken. The porcelain but is very hard, the quality of the diamond cutting disc must be very good in this case.

Tip: No matter what material, the cut edge is not always convincing. This can often be improved by sanding with a suitably hard abrasive or a grindstone.

Tiling with a multitool?

Tile cutting: cutting

Round cutouts succeed best with a drill bit.

For a multitool, almost the same as for the angle cutter only applies that this clearly weaker motorized device reaches its limits even faster and, for example, is out of the question for porcelain stoneware. For some tiles, however, an oscillating multitool can be advantageous because it works more gently, with less vibrations than an angle grinder.

With a multitool, you can make even smaller cutouts in the middle of a plate lighter than, for example, with a larger angle grinder. In any case, you need appropriate diamond attachments (there are some as a set).

However, diamond drill bits are often easier and better to handle for such tasks. This is especially true if you need rounding more or less imperatively when cutting tiles (eg: for pipes, fittings or sockets.

Tile with a jigsaw? Better with a glass cutter!

Tile cutting: tile

A simple glass cutter is sometimes not a bad solution.

Although jigsaws with diamond equipment are also available for jigsaws, a jigsaw is not suitable for this purpose. It would be an ugly, unclean sawing edge to expect and not good for the jigsaw.

Softer ceramic tiles, which would be considered best for such an experiment, are much easier to scrape with a regular handheld tile cutter, tweezers or oilglass cutter and break over a straight edge.

When breaking other cutouts, a so-called parrot beak or tiler is useful.

Cut large format tiles

Tile cutting: tile

With large-sized tiles, the damage is greater if tiles break incorrectly.

Since the formats are currently getting bigger, you can not cut them with an average tile cutter. In that case, you rely on a particularly large loaner or you dare to use the angle grinder.

Since there is a greater risk of breakage when dealing with large-format tiles, it may be worth having the tiles cut if your hardware store or tile supplier has them on offer. Inquire in advance about it.

Several square feet of breakage will, in the worst case, throw an unexpected hole in your budget.

Cut the mitred tiles

Edges with fine joints for which the tiles are mitred or cut are particularly noble. Since the miter cut is rather something for the equipment of a professional, for the private sector, the grinding is much more recommended. For less ambitious do-it-yourselfers, there are special plastic rails for the edges that allow a clean edge when tiling.

Author: Christiane Baldwin - Online Editor and Handyman

Photo Credits:

  • Cover picture: Pixabay, jackman34, CC0 Public Domain
  • Tiler: Pixabay, jarmoluk, CC0 Public Domain
  • Straight cut angle grinder: Pixabay, stux, CCO public domain
  • Round neckline: Pixabay, stux, CCO public domain
  • Glass Cutter: Pixabay, stux, CCO Public Domain
  • Cutouts: Pixabay, jackman34, CCO Public Domain
  • Post photo: Pixabay, jarmoluk, CCO Public Domain

Similar sites

  • Crafting templates and craft arches
  • Tinker folding cards
  • Painting tiles - painting tiles
  • garage door types
  • Laying large tiles - this is how it works
  • Laying plan for tiles - symmetry when laying tiles
  • Porcelain stoneware cutting - tips for handling porcelain stoneware tiles
  • Tile stairs properly - you must pay attention
  • Lay mosaic tiles guide
  • angle
  • glass cutter
  • tile cutter

Video Board: How to Use a Manual Tile Cutter Beginners Guide