Valuable tips for cleaning and maintaining bathroom and kitchen fittings

Valve maintenance: Valuable tips for bathroom and kitchen fittings

Valuable tips for cleaning and maintaining bathroom and kitchen fittings: valuable

Photo: Vera Löwenberg / pixelio.de.

Whether shiny, satin or matt, chrome or stainless steel, the fittings in your bathroom or in the kitchen need special attention. Because they also serve as a business card for the two rooms. Well-maintained fittings radiate elegance, cleanliness and hygiene. So that you achieve this effect and enjoy the fittings in the kitchen and bathroom for a long time, following ten tips for care.

1. Consider the material and surface of the kitchen and bath fittings

The care requirements are in particular based on the surface material of the fittings. Particularly sensitive are chrome fittings. Scouring and cleaning agents based on acid are taboo in this case. The situation is similar with colored surfaces. These fittings are special variants, which are provided with a surface of baked enamel. This sealant is sensitive to corrosive, alcoholic and other aggressive care products.

Chrome faucets are actually chromed brass faucets. Aggressive cleaners help to make the chrome layer peel off over time and bring the brass to the surface. Corrosion damage is the result.

2. Use only special cleaners

Valuable tips for cleaning and maintaining bathroom and kitchen fittings: tips

Photo: siepmannH / pixelio.de.

In the bathroom and in the kitchen accumulate at the fittings inevitably lime and Seifenrestablagerungen. For this you need the appropriate cleaning agents. Read the instructions for the respective area of ​​application thoroughly. You will recognize the appropriate care product on the manufacturer's instructions on the back, which identify the means for use on fittings. Such a cleaner must meet high standards. First, it must contain some acid to remove limescale. On the other hand, the acid concentration must not be too high, since the care product otherwise damages the fittings.

To prepare stainless steel fittings for care, special stainless steel cleaners are handy. Here, the active ingredients were specially tailored to the surface material. Other cleaners seal the surface. This causes water to bead off and delays the re-formation of limescale.

3. Avoid certain active ingredients

Some bathroom and kitchen cleaners contain active ingredients that can cause irreversible damage to the fitting. These agents include:

  • Acetic acid (also known as ethanoic acid or acetic acid)
  • Hydrochloric acid (hydrochloric acid, Acidum hydrochloricum)
  • Formic acid (methanoic acid, formylic acid, formic acid, hydrocarboxylic acid)
  • Chlorine bleach (sodium hypochlorite, sodium hypochlorite)
  • Phosphoric acid (E 338).

The mixing of different cleaning agents should be avoided as much as possible. The different active ingredients can react with each other and develop harmful vapors.

Stainless steel fittings are sensitive to cleaners containing hydrofluoric acid and chlorine. These aggressive substances lead to corrosion damage to the valve.

4. Use suitable tools

Valuable tips for cleaning and maintaining bathroom and kitchen fittings: cleaning

Photo: Günther Schad / pixelio.de.

Not only individual active ingredients, but also the surface material of the cleaning helpers lead to damage. Sponges with a scratchy surface and rough cloths are unsuitable for cleaning bathroom and kitchen fittings. Make sure you choose lint-free cloths when choosing. Faucets sealed with a special stoving enamel require special cleaning aids. This surface only tolerates leather, a soft cloth and clear water. Particularly sensitive are luxury fittings with a gold-plated seal.

5. Observe the instructions for use

On the back of the care products you will find instructions for use, cleaning aids such as cloth or sponge and the recommended exposure time. Avoid too long exposure time and observe the dosage instructions. In this way, the funds unfold their full effect and protect the tap surface.

The longer the cleaning agents act, the more they rough the surface of the material. An incorrectly treated surface offers even more attack surface for dirt and limescale deposits. A vicious circle: If you resort to aggressive means and rough plaster sponges, the taps must ultimately be cleaned more frequently. Limescale and soap residue collects again faster on the fitting surface.

6. Consciously prevent heavy calcium deposits

The longer you neglect the limescale deposits on your fittings, the harder it will be to remove them again. By regular cleaning, you can counteract the buildup of deposits. If you often clean the fittings from dirt and lime, you do not have to resort to aggressive cleaning agents.

However, there is another way you can prevent the annoying calcification. Dry the fittings after each use with a soft dry cloth. This approach is especially recommended for homes in areas with hard drinking water. Persistent deposits and dull limescale tend to form on wet fittings. Experts advise to clean fittings daily with gentle means.

7. Do not apply detergent directly for spraying

Valuable tips for cleaning and maintaining bathroom and kitchen fittings: cleaning

Photo: F.H.Me. / pixelio.de.

Detergents in spray bottles almost always have an indication that the agent should not be applied directly to the valve. In fact, manufacturers recommend spraying the agent on a soft cloth or sponge. This application note has a specific reason, because the fine spray gets into cracks and openings of the fittings. Here, the detergent can cause irreversible damage.

8. Rinse with clear water

Always rinse with clean water after cleaning. This will remove cleaner residue. This procedure is especially recommended if you need to resort to stubborn dirt on acidic cleaning agents. Especially the robust stainless steel fittings are sensitive to drying chemicals. Dry the fitting thoroughly after rinsing.

Remains of shampoo and shower gel over time to stubborn dirt, especially on shower fittings. Rinse these residues with clear water before they settle. In areas with limy drinking water, it is recommended to rinse the fittings with distilled water. Remove stubborn residues with a small amount of alcohol.

9. Test gentle alternatives

Valuable tips for cleaning and maintaining bathroom and kitchen fittings: maintaining

Photo: B. Fohrn / pixelio.de.

For light soiling it is worthwhile to test gentle cleaning procedures. For example, try water and regular soap. You may also be satisfied with the cleaning performance of a mild detergent. Then polish the fitting with a soft cloth to ensure a radiant shine. They get limescale with simple food vinegar under control and save in this way expensive special agents. Due to the gentle cleaning you also increase the lifetime of your valves - so you save twice.

Dilute vinegar essence so that the high acid concentration does not damage the fitting. Start with a small amount of acetic acid. If the cleaning performance of the weak mixture is insufficient, add a little more essence.

10. More attention to the interior of the fittings

In order for the fitting to work reliably for a long time, you should also devote yourself to the inner workings at regular intervals. Not only does the lime settle outwards, it also supplies accessories such as the aerator in the mixer tap. You recognize a calcification of this component because the water no longer emerges evenly from the fine grid.

Remove the bubbler once or twice a year and treat it with diluted vinegar. A gentler treatment can be achieved by cleaning the bubbler with a special limescale remover. Normally you use this detergent for the coffee machine or the kettle. However, he also does a good job of maintaining the fittings. The decalcifier protects the material and convinces with its preventive effect. The active ingredients delay the formation of limescale.

Care tips increase the service life of the valves

The use of the listed care tips and cleaning instructions will help to ensure that your fittings will look like new for a long time. Likewise, a proper care is conducive to a long service life of your shower, sink and sink fittings.

Proper care is also necessary in order to be able to use the statutory warranty claim for manufacturer-related (surface) damage. On the other hand, if you have treated your fittings with aggressive cleaners and spongy sponges, the manufacturer has the right to deny you warranty service and the warranty claim.

Similar sites

  • Car Interior Cleaning: Clean car seats, clean carpet and upholstery cleaning
  • Purchase advice for kitchen and bath fittings: Tips Purchase of fittings in the kitchen and bathroom
  • Clean windows without streaks
  • Clean and polish marble floor - sand natural stone floor
  • Clean high pile carpet
  • Cleaning and care of tiles
  • Clean the oven
  • Clean joints in the bathroom and garden properly
  • Clean and clean the iron
  • Pleated in bathroom and kitchen: pleats
  • Money saving tips for home improvement
  • Cleaning the baking tray - cleaning tips and home remedies
  • Descale and clean the coffee machine
  • Tips for whirlpool and Jacuzzi bathing
  • Clean paving stone

Video Board: Bathroom Cleaning Tips:- How to Clean a Bathroom Tap and Shower Tap