Wood drill comparison 2018

Purchase advice for the wood drill comparison or test 2018

  • For drilling in wood, you need specially produced wood drills for these purposes - these differ from the variants that are used for metal or stone.
  • In the case of wood drills, a distinction is made between spiral drills or universal drills (suitable for all types of wood), auger drills (in particular for softwood and glued timber) and so-called Forstner drills (for veneered chipboard and generally very wide drilled holes).
  • When buying wood drills, pay particular attention to the material: Wood drills made of "high-speed steel" (HS steel) are considered to be largely unbreakable and highly heat-resistant (up to 600° C).

Wood drill comparison 2018: wood

The number of handicraft-affluent Germans who have gained a drill in recent years was already over 50 million in 2016 (Source: VuMA). In addition to the appropriate machine needs a good home improvement, of course, also good drilling attachments. Especially if you have big plans, you should focus on qualityNothing curbs the fun of building and crafting faster than bent or broken drills that additionally damage the material being processed.

In our Wood Drill Comparison 2018, we took a closer look at the currently best wood drills and in this guide we answer the corresponding questions about the various types of wood drills as well as the correct care and cleaning.

1. The special drill only for wood

With the wood drill through the wall?

You should avoid that! If you're unlucky, you'll hit the hard stone with the wood drill and that would be the quick and tragic end (not just) of the drill bit. Probably the good piece would get stuck in the stone wall and then - when trying to pull it out - break.

There is now a suitable drill for every material with a specially adapted drill bit that is designed to do exactly what a good drill needs to do: piercing the material as much as possible and with little effort, while remaining as intact as possible.

While the models from our wood drill comparison by wood to cut, the stone drill that hits stone will literally make it with the help of the hammer-shaped end smash. The wood drill, on the other hand, has a sharp drill bit that allows it to cut perfectly through wood fiberswithout them splintering.

Finally, with metal drills, a completely different method is needed: Here the upper metal layers are planed off and the drill is turned into the metal. Since this is stable enough, dissolve metal shavings exclusively at the drilling site. The use of stone or wood drills on a metal workpiece would fragment this.

2. Which wood drill types are there?

Holzbohrer typedescription
Forstner drill or blind hole drill

Wood drill comparison 2018: drills

Forstner drills are suitable best for hard and soft wood and especially for veneered chipboard, In general, this drill has been designed so that it can be applied to very wide, but not deep, holes.

The parallel designation blind hole drill stems from the increased use when drilling out knotholes and blind holes.


Wood drill comparison 2018: 2018

Snake drill were for use when drilling through softwood and laminated wood created.

The unmistakable tip is a small thread that provides a secure fit when drilling. Due to the wide distance of the spiral cutting edge is this drill especially designed for deep holes.

twist drill

Wood drill comparison 2018: drill

After all, the twist drills are the all-rounder among the drills and in fact suitable for all types of wood (hence the name Universal drill).

This type of drill is in all imaginable lengths and widths available - twist drills are also available also used as a wood dowel drill.

Note: Do not get confused - Sometimes wood drills are also referred to as taps (due to their spiral shape). However, taps are actually drills for metal threads (to integrate screws in metal).

Wood drill comparison 2018: wood

Thanks a keyless chuck The focus on the size of your wood drills is unnecessary.

3. Purchase advice for wood drills: What you should look out for

First, it should be noted: Size does not play a big role in determining your Wood Twist Test winner - and that has a simple reason: the adaptability of the quick release chuck. The drill chuck of the cordless drill as well as the impact drill adapts easily to the corresponding diameter of the drill, which is why you can, for example, also use hexagonal shanks.

3.1. Drilling accuracy and number of spirals

Here are several factors crucial - on the one hand the manufacturing process and on the other hand, the selected material. In principle, the harder the metal, the longer it can last and the harder it can bend.

Blunt wood drills or those with small bumps cause the wood to break rather than being cut cleanly and precisely. For particularly hard and tough types of wood (eg oak, maple and mahogany) we also recommend the use of wood drills with two parallel cutting spirals.

3.2. material

Wood drill comparison 2018: wood

The twist drills from this set by Fortag are made of "high speed steel" or HS steel.

The specimens from this year's wood drill comparison are mostly made of HS steel or chrome steel - but what does that mean anyway?

So-called HS steel stands for "high-speed steel" (sometimes abbreviated "HSS", which then stands for the English "High Speed ​​Steel"). Thanks to an alloy of different metals, this steel version is considered a "very robust" category. In addition, HS steel is considered extremely heat resistant, which is why even high cutting threads are easily possible.

Chromium, molybdenum and vanadium are among the most common other steel alloys - although these (like HS steel) are stainless, too, they often lack the stability of high-speed steel.

Watch out!If chromium is specified as the material, you should make sure that it is just a chrome coating or that chrome is part of an alloy. A chromium layer protects only externally against rust and scrapes off relatively quickly. So: As an alloy, you have more of the chrome.

Below we have the advantages and disadvantages of HS steel summarized for you:

  • stays very sharp for a long time
  • virtually unbendable
  • low risk of breakage
  • very heat resistant (up to 600° C)
  • comparatively expensive

3.3. Manufacturers and brands

While Bosch, Alps and Mannesmann already to the more familiar wood drill brands The following manufacturers are just a little unknown to many home improvement newcomers; we have listed the most important ones for you:

  • proxxon
  • ENT
  • Famag
  • Makita
  • Metabo
  • Mohoo
  • Wolfcraft

4. Questions and answers about the wood drill

4.1. What should I look for when drilling wood?

Wood drill comparison 2018: drills

Always important: when drilling keep the machine straight.

The most important thing in drilling is that of the drill as straight as possible clamped in the keyless chuck of your drill. Even before you start drilling, you should place the centering point on the drilling site.

Hold the drill as straight as possible, otherwise the hole goes - quite literally - wrong. You have only one try, but: Practice makes perfect!

4.2. What do I use wood dowels for?

Wood drill comparison 2018: drill

Are considered elementary when drilling furniture: wooden dowels.

Wooden dowels are an elementary part of wood boring and the topic should not be missing in any wood boring test. You need wooden dowels especially for the construction of more complex constructs like furniture or a garden or tool shed.

For inexperienced craftsmen or those who want to become one, we recommend to resort to tools such as drill stands, Holes usually work just as precisely with these uprights as with the hands-free drilling of an experienced carpenter. In addition, drill stands ensure that you do not drill too deep or the dowel is pressed into the wood.

4.3. How do I best care for my wood drills?

Especially after intensive wood drilling the cleaning of the wood drills becomes indispensable - in particular resins, which are in the wood and should be removed from the drill after work is done. Especially with particularly favorable wood drills worth a subsequent cleaning - more expensive copies are made of stainless steel, which only requires a superficial cleaning.

Note: Avoid the use of oil or grease when cleaning the wood drills, as this contaminates the subsequent drilling in the wood and also sticks disturbing wood chips on the drill.

Similar sites

  • Jigsaw templates
  • Tips for drilling metal and steel
  • Tinker with wood
  • Plexiglas drill
  • Grind drill - instructions
  • Terrace furniture made of wood, rattan, metal and aluminum, weatherproof and cheap
  • The right drill for wood, steel or concrete
  • Cordless Screwdriver Festool CXS im
  • wood splitter
  • Cordless Screwdriver
  • WC seat
  • metal drill
  • Rotary Hammer
  • masonry drill
  • SDS Plus drill

Video Board: 18v Cordless Drill Showdown - Which is the Best?