Wooden table weatherproof - important tricks

If wood stays outdoors all year round, it dries moisture and rots. So it's important to protect a wooden table that stays outside. There are various coatings such as wax, oil or varnish. However, a few types of wood need no protection at all. What you should pay attention to and how the wooden table is made weatherproof, we show here.

Pay attention to the parking space

When protecting a wooden outdoor table, you should match the wood preservative to the location of the table. If the table is under a patio roof, you do not need to seal the wood as effectively. Here is enough for the table top quite a good wood oil or wax as protection. However, the legs should still be sealed with a paint, as it can even splash water against it.

Step by step make a wooden table weatherproof

  • Clear coat / color coat
  • rubber saver
  • hammer
  • paint roller
  • lacquer bowl
  • brush
  • abrasive paper
  • sander

1. sanding

The wooden table does not need to be sanded down very well unless there are stains on it. It is sufficient to roughen the wood well, so that it takes the paint or the clear coat well.

2. Painting

First, paint the tabletop. If you are using a colored acrylic paint, you should at least dilute the first coat of paint a little with water and apply it like a primer. Always swipe or roll from one end of the table to the other towards the grain.

Allow the paint layers to dry thoroughly before starting the next coat of paint. Only when you have finished with the plate and it has dried, the legs or the base should be tackled.

3. Protect feet

Even under a patio roof, water can collect on the floor after a heavy downpour. It is therefore useful if the table legs are also made weatherproof from below. There are rubber covers, which are either hammered or glued into the table leg with a hammer. Be sure to use extra thick rubber pieces to keep the table out of moisture.

Tips & Tricks

If you like the work of sealing, you should choose a wood that does not need this protection. Bamboo, teak and robinia, but also the native larch or Douglas fir require little protection. If anything, a light seal with a good wood oil is sufficient for these woods.

Video Board: How To Finish A LIve Edge Slab | Tips & Tricks