Install wood paneling on the garage - this is how it works


For a time, many cheap and stable concrete garages were built. However, these garages have never been beautiful. Therefore, many homeowners want to give their garage a new look today. With a wood paneling that's easy. Here we show you how you can provide your garage with a natural wood look.

Install wood trim on the garage step by step

  • boards
  • battens
  • stainless steel screws
  • dowel
  • Cordless Screwdriver
  • drilling machine
  • drill
  • sinker
  • hammer
  • screwdriver
  • spirit level
  • ruler

1. Attach slat construction

Wood should always be back-ventilated so it does not rot. Therefore, the slats for the substructure should have at least a thickness of three centimeters. In addition, the slats should be treated with wood protection before cultivation. The slats are mounted vertically, so that the boards can be screwed transversely to the garage front.

Since garages rarely have a roof overhang, it is cheaper for the wood to install the boards across. Otherwise, the front sides of each board would be heavily exposed to the weather. So only the upper board must be additionally provided with a cover or more frequently replaced once.

2. Screw on the wood

If the slats are firmly screwed to the garage wall, you can mark on your boards, where a hole must be drilled in each case. You should pre-drill this with a wood drill. The boards should also be treated with wood preservation beforehand. After all, you will not be able to reach most places later.

3. Work out the corners and connections

You can either miter all corner boards. So you have at the corners only a very narrow seam. In addition, the front sides of the woods are better protected from the weather. But there are also numerous systems of corner strips that are simply placed over the corner boards. For a beginner, this is certainly a nice easy solution. Later, the first variant looks more elegant.

Tips & Tricks

There are finished plastic systems that have a wood look. If you have problems with moisture or the garage is very exposed to the weather, this variant may last longer than a real wood paneling. For these systems, there are usually also the matching corner strips and terminal strips.


Video Board: Insulating a Garage, Adding Outlets, and Installing OSB Panels