Paint wooden table white - it's that easy

You do not have to use an old worn-out table to cut wood, with some acrylic paint and a little bit of work you can turn it into a real gem. If the wooden table is completely painted, you can even use it later on a balcony or terrace. As the wooden table is exactly painted, we show here in the manual.

Paint a white wooden table step by step

  • White acrylic paint
  • Wood filler
  • sanding block
  • sander
  • Sandpaper different grits
  • Hand Brush
  • cotton cloth
  • spatula
  • Schaumrolle
  • brush
  • lacquer bowl

1. grinding

If the table is severely damaged, you should start with a 60 grit sandpaper. If the damage is not so great, it's enough to start with the 80 grit. If the table continues to make a rustic impression, you only need to grind with the 100 grit. For a noble piece, however, you have to work your way to at least 120 or 150.

2. spatulas

If there are too much notches in the tabletop, you should not try to grind them. Otherwise the plate would be too thin. Fill the dents with a flexible wooden putty. These must also be sanded off after drying.

3. Pre-painting

For pre-painting, use the same acrylic paint as for the final coat. When painting, however, the paint should be slightly diluted with water. You can apply this diluted paint twice, so that the subsequent paint keeps perfect. If you notice slight bumps, there is still time left to grind the table again with a fine sandpaper.

4. Painting

Also dilute the white acrylic paint for the final coat a little bit with water. When painting, be extremely economical with the paint. It may sound exaggerated, but if you paint the table in three or more layers of paint, the result will be many times better and more durable. Run the color at the edges of the table, dab off the runners with an old rag and swipe again over this spot.

Tips & Tricks

If you do not want to completely cover the grain of the wood, you should only glaze the table white. Bear in mind, however, that wood species that contain many branches and resin will easily penetrate later. At the site of the branches, the glaze then becomes dark brown and unattractive over time. Maybe you should mark with a clear barring reason.

Video Board: Easy Chalk Paint Finish!