Create wooden terrace properly and create stability

The substructure is as important with a wooden terrace as with any other building. If the wood of the terrace floor is ventilated, this increases the durability. The substructure should be provided with a stable foundation and a drainable floor.

Carry out comprehensive planning

Anyone who thinks about creating a terrace should include several factors in the planning. In addition to the size of the there are many options and design options that need to be considered in advance.

  • canopy
  • Species
  • With or without railing
  • Basement or with usable storage space
  • side panel
  • House wall connection
  • Fundamentart
  • hallway distances
  • Carrying elements such as beams, strips or concrete steles

Structurally, the construction of the terrace must be a
Create a slope that allows precipitation to drain quickly. In constructions that are to be created from expensive tropical wood, the substructure does not necessarily have to be made of the same wood. The invisible substructure of a Bangkirai terrace can be made of other cheaper wood such as thermowood, unless a concrete structure is provided anyway.

The preparation and application of the ground depends on the condition of the soil. Loose ground must be compacted if it is to take on a supporting function. The most preferred alternative are pillars made of wood or concrete cast in point foundations. In this case, suitable as a floor under the wooden floorboards a seepage gravel or gravel. If a dry storage space is created, the water drainage must be controlled with a false floor under the decking.

How to lay your terrace

  • (Millimeter) Paper
  • Ruler or tape measure
  • ruler
  • angle triangle
  • pencil
  • Eventually architecture software

1. Set size and depth

Depending on the location and structural conditions, you can draw a plan in side and frontal view. Take into account the necessary depths of the load-bearing parts in the floor and sufficient load distribution through the substructure.

2. Plan accesses

Make detailed drawings of the wall connection to a patio door and from stairs or stairs to the garden.

3. Substructure

Depending on the planning, you have to plan for possible excavation and disposal. You need gravel or grit for a porous ground. When draining water, a drainage system must be planned.

4. Wood species and planks

Find out about the possible woody plants and their characteristics. Calculate the need for decking and support structure.

Tips & Tricks

For little money and partly as freeware, there are good architecture software programs that allow you to create three-dimensional images of your patio project.

Video Board: A Few Ways to Brace off Free Standing Wood Framed Deck